These agitator directional cogs are commonly referred to as dog ears. They come four to a package and are usually used with direct drive washing machines.
$5.60
In Stock
Order within the next 7 hrs and your part ships today!
This coupling kit is located between the motor and the transmission on direct drive washers with no belt. This is the newer version and is made with new metal sleeves for added strength.
$35.54
In Stock
Order within the next 7 hrs and your part ships today!
This pump is intended for use with washing machines that do not have belts. This drain pump has two ports for water to pass through: a large one, and a smaller one.
$62.18
In Stock
Order within the next 7 hrs and your part ships today!
The suspension spring supports the outer tub and keeps the tub steady during loads that could cause an unbalance. If this part breaks, is worn down or has stretched out and lost its spring, it could c...
$10.20
In Stock
Order within the next 7 hrs and your part ships today!
A worn clutch can cause a slower spin speed which will leave your clothes wet after a cycle. This clutch assembly comes with brake cam driver, blue spring for large capacity washers and black spring f...
$38.04
In Stock
Order within the next 7 hrs and your part ships today!
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$10.20
In Stock
Order within the next 7 hrs and your part ships today!
Also known as an O-Ring. This black o-ring seal is three inches in diameter.
$19.47
In Stock
Order within the next 7 hrs and your part ships today!
Questions And Answers for WTW57ESVW1
Ask our experts a question about this model and we'll get back to you as soon as possible!
13 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Phyllis
January 7, 2020
When she spins for the water to come out the clothes are still wet
For model number WTW57ESVW1
Hello Phyllis, thank you for your question. We would recommend testing/replacing the following parts to fix that issue. Clutch Assembly Part Number: 285785, Direct Drive Motor Coupling Part Number: 285753A, Direct Drive Water Pump Part Number: WP3363394. I hope this helps!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Barbara
January 21, 2020
While washing the motor is normal speed and action then slows way down then returns to normal then slows down throughout the wash
For model number WTW57ESVW1
Hello and thank you for writing.
This could possibly indicate a malfunctioning motor itself PS11743427, you should check for signs of damage, and replace the part(s) as needed. We hope this helps. Please contact us anytime if you require further assistance.
Hello J.T, Thank you for the question. You will need a 5/16-inch nut driver for this repair. You will need to access the back of the washer, and remove the two Phillips screws that hold the top back panel in place. Slide the panel forward to release. Use your nut driver to loosen the screw that holds the ground wire in place. Lift the lid of the washer to release. Hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Doug
February 20, 2020
My machine walks when it spins and makes a loud bang when it stops spinning
For model number WTW57ESVW1
Good Day Dog. Thank you for your question in regards to your unit (Model Number WTW57ESVW1). The following URL is to a list of parts that you may need to replace on your unit in order to solve the issue that you are having: https://www.partselect.com/AdvancedModelSymptoms.aspx?ModelNum=WTW57ESVW1&mfgModelNum=&fkMfgID=3&ModelMasterID=347382&PID=28. You can order these parts either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.
Was this helpful?
Thank you for voting!
Bobby
December 23, 2019
Washer will fill and agitate as it is filling. When it gets to the rinse / spin cycle, it was spinning but not draining, but now it just hums, doesn’t spin, and water will not drain. It has also tripped the breaker and had a burning smell. I replaced the drain pump but that wasn’t it.
For model number WTW57ESVW1
Hello Bobby,
Thank you for your question. Our sources suggest replacing the timer under part PS11749654 for your model to fix the issues. We hope this helps!
The job looked intimidating but turned out to be very easy. First take off the water pump by removing the two clips that hold it in place. Place a shallow pan under the pump to catch the water that is in the pump and hoses. Open the hose clamps with a pair of pliers or channel locks (better) and slide the hoses off of the water pump. The motor comes off next. Unplug the electrical connector from the motor and two wires from the capacitor. Remove the two screws holding the clamps in place and then pop off the two clamps. You will need to hold up the motor with one hand while you remove the clamps or it will fall to the floor once the clamps are removed. One piece of the coupling assemble will be attached to the motor and the other will be attached to the gearcase drive shaft. If you want to clean up the mess created by the shredded rubber center piece of the coupling assembly you will have to take off the motor mounting plate. It is held on by two bolts and removing it makes installing the coupling easier but probably not necessary. Push the back half of the coupling on to the gearcase drive shaft until the shaft is flush with the face of the coupling. Install the new rubber center piece on to the coupling then re-install the motor mounting plate. Install the other half of the coupling on to the motor shaft and lift the motor up to the coupling. You have to rotate the motor shaft by spinning the fan blades until the coupling lines up so you can slide it into the other half of the coupling. Then just reattach the motor, connectors and water pump in the reverse order of disassembly.
First pry off the cap of the agitator. Then using a socket remove the bolt that holds the plastic cup in place. Remove this cup by prying it loose from the two tabs that hold it in place. Once this cup is removed you can get to the broken cogs. Slip the new cogs into the underside of the cup, and slide the cup back down in the agitator housing using the slots on the side for a guide. (You may want to remove the entire agitator and assemble everything upside down, then flip it all back over to mount, so the cogs don't fall out). Tighten the bolt, snap the cap back in place on top of the agitator and your'e done. Easy repair.
The hardest part of this job was pulling the machine away from the wall so the hoses could be disconnected and the machine flipped onto it's back. Putting the machine on it's back does two things. It drains the water left in the bottom of the tub so it won't pour out onto the motor when the old pump is removed, and gives the necessary access to the pump. Once the machine is on it's back you remove the hose clamps with a pair of pliers and disconnect the hoses. The pump is secured to the motor with a pair of spring steel retaining clips which are easily popped off by hand. Once the clips are removed, the pump is in your hand. Put the new pump in place, replace the retaining clips and hoses, and you're done. This has to have been the easiest repair I've ever done. I wish cleaning gutters was this easy.