This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$10.20
In Stock
Order within the next 6 hrs and your part ships today!
The point of the lid switch is for the tub to stop spinning when the washer lid is opened. It is a safety precaution just in case someone decides to stick their hand inside the washer while the tub is spinning.
$72.93
In Stock
Order within the next 6 hrs and your part ships today!
This drive hub kit (part number W10528947VP) is for washers.
Drive hub kit W10528947VP connects the spin basket to the spin shaft that spins the basket. The kit may include multiple parts; refer to...
$43.28
In Stock
Order within the next 6 hrs and your part ships today!
This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the spl...
$69.34
In Stock
Order within the next 6 hrs and your part ships today!
This part changes the transmission from agitation to spin mode. This actuator is for washers.
Actuator shifts the splutch and monitors the position of the splutch.
$93.59
In Stock
Order within the next 6 hrs and your part ships today!
These parts are the replacement suspension rod supports for your washer. They are made of plastic and are approximately 1 ½ inches in diameter. This package will come with an 8-piece set of suspension...
$8.77
In Stock
Order within the next 6 hrs and your part ships today!
This part is the replacement lid latch or latch assembly for your top-load washer. The lid latch holds your washer door closed, and allows the washer to run its cycle. If the lid latch is damaged, you...
$56.72
In Stock
Order within the next 6 hrs and your part ships today!
Order within the next 6 hrs and your part ships today!
Questions And Answers for WTW5600XW3
Ask our experts a question about this model and we'll get back to you as soon as possible!
6 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Roger
December 27, 2019
Turn on power, set spin speed to no spin push start, it senses, it spins one second, lid light flashes
For model number WTW5600XW3
Good Day Roger. Thank you for your question in regards to your unit (Model Number WTW5600XW3). Based on our research, you may need to replace the Lid Latch on your unit (PartSelect Number PS3497627). You can order this part either online at our website www.PartSelect.com or by calling us by phone at 888-260-4310. Best Regards.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Kathy
March 3, 2020
When i close the lid to washer the red light comes on lid lock. Then it comes right back off and the machine won’t run. What can be causing this is there a sensor in the lid?
For model number WTW5600XW3
Hello, Thank you for your question. Looking at this model you will want to check the Lid Latch assembly- PartSelect Number: PS3497627. If that is not operating correctly that will not register the door is closing or not. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mike
December 1, 2022
When in washing cycle it doesn’t go to drain and spin. If I unplug the power and wait ten minutes or so and plug it back in and turn knob to drain and spin it would work but now nothing comes on.
For model number WTW5600XW3
Hello Mike, thank you for contacting us. The issue is most probably related to the electronic control board, part number PS3653298. It manages and controls the washer's functions such as filling, washing, draining, and spinning. Please reach out to customer service if you need help placing an order. Glad to be of help!
I brought the lid latch assembly from here online and put it in and the washer lid latch still flashes. After awhile the washer will fill but wont spin at all, then the water will go out. After that in order for my clothes to spin the water out my clothes i have to put it on drain and spin that's the only time my clothes will spin and that's the only time the lid latch lock when i put it on drain and spin. Can you help me with this problem?
For model number WTW5600XW3
Hello Tracey, Thank you for contacting us. It may be a faulty Drive Motor.
Here is how to test the drive motor in a washing machine: Disconnect the power source from your appliance before beginning as you will be handling electrical components. Remove the cabinet of your washer in order to locate and remove the drive motor. You will need to disconnect the wires attached to the motor in order to remove it from the appliance, do this by pulling on the metal connectors and not the wires. Set your multi-meter to the Rx1 setting. Test for continuity by placing the probes onto the terminals of the motor. You should receive a reading of zero or nearly zero. To test the ground connection, leave one probe on the terminal and place the other on the metal housing of the drive motor. You should not receive any reading from this test. If your readings differ from those described above, you need a replacement drive motor.
Was this helpful?
Thank you for voting!
Teresa
January 13, 2023
What capability is this washer? I am trying to replace this washer and want to buy the same size.
Thank You!
For model number WTW5600XW3
Hello Teresa, thank you for your question. The Unit is 27 Inch Top-Load Washer with 3.6 cu. ft. Capacity. We look forward to hearing from you.
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
A detailed Service Technician Service Manual is hidden inside the machine on the front panel. It is hidden by the bleach dispenser input. It gives a list of fault codes and instructions for calibration after repair, resetting fault codes, and a manual test mode for stepping the machine through each mode on command. The Tachometer failed which would not let the machine come up to maximum spin speed. The tachometer is part of the solenoid actuator that shifts the transmission. It is not specifically called out in the manual. Any failure causes the lid lock light to blink which gives the appearance of a lid lock failure
The instructions that came with the part were worthless. Essentially, unplug, put in new part, plug it back in. I spent a considerable amount of time on the internet and finally found a video showing how to open the top. Unlike other models, it is held down by clamps in the back rather than clips in the front. Once finding this information the installation was simple. Remove the clamps and the back of the console, slide the top forward and lift, remove and replace the lock and reassemble. You don't even have to remove the hoses.
Well, first investigated and found loose nut on drive clutch. First take off the two screws with nut drive then cover off using a screwdriver blade to snap off the cover. Then socket ratchet to take off the nut on drive clutch. take off belt by slowly rotating the drive gear. two screws that hold the electronics to the upper drive clutch and put aside, so you can snap off the cover for drive clutch on upper part with screwdriver and off the parts come and install whole unit back as took it apart. Line up the new upper clutch so that is position as was before. (Using parts diagram helps a lot as www. partsselect.com has for you or Maytag.com.) Then put the electronic part board back on and the gear and nut. Make sure it is tight by several attempts to make sure it's snugged up good and then slowly roll belt back on the pulley and motor drive. Put your cover guard back on with two screws and done.
