This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This drive hub kit (part number W10528947VP) is for washers.
Drive hub kit W10528947VP connects the spin basket to the spin shaft that spins the basket. The kit may include multiple parts; refer to...
This is a replacement clutch assembly or cam kit for your washer. The clutch assembly is mounted on the drive shaft on the bottom of your washer. You may need to replace the clutch assembly if the spl...
This agitator is for washers.
Agitator rotates back and forth to move the clothes inside the tub to clean the load.
Unplug the washer before installing this part. Wear work gloves to protect your hands.
This water inlet valve is for washers.
The water inlet valve controls the water flow into the washer.
Unplug the washer and shut off the water supply before installing this part. Wear work glove...
Ask our experts a question about this model and we'll get back to you as soon as possible!
11 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Damaris
June 24, 2022
I would like to know where do I find the lint compartment? To take out the lint.
For model number WTW4955HW1
Hi Damaris,
Thank you for your question. The lint filter is located under the basket in the bottom of the outer tub assembly. You will need to remove the basket and agitator to get to the filter. The filter is held in place by screws. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
I need a floor drain system so my washer will spin out the clothes. I think I need a siphon break kit, 2 connector kits and an extension drain hose.
For model number WTW4955HW1
Hello Barbara, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS334662. We hope this helps!
Hello, Above model washer(< 3 years old) spills out water on to the floor all four sides during operation despite machine level being verified. However, not totally convinced though, the water spillage appears commonly during the automatic spin/rinse cycle (implementation of optional cycles are not affective). I would appreciate any potential solution you may provide. I am also a diy type home owner and would like any helpful insight.
For model number WTW4955HW1
Hi Richard, thank you for reaching out. We would recommend checking the drain hose first. If it is fine, the issue could be with the drain pump, part number PS11770076. You may need to replace it to fix the issue. We hope this solves your problem!
I have an agitator where we put the fabric softener in when we are washing clothes. In the last wash or two we are seeing black and brown gunk is landing all over our clean close. I took the top of the fabric softener dispenser off and inside the agitator it is full of soap scum. How do you clean the inside of the dispenser out?
For model number WTW4955HW1
Hello Jeff, Thank you for your question. One thing you can do is run the cycle with no clothing using one gallon of vinegar. Also, you may try filling a large bowl of boiliing hot water and let the whole dispenser sit it it for an hour or so. You may need to weight it down as it tends to float up. Then, using an old toothbrush, simply remove the softened soap scum. Repeat every 3 months. We hope this helps!
Was this helpful?
Thank you for voting!
James
March 10, 2022
I bought this model used and it had remaining water in the drum (not in the tub where your clothes go) how do I get the water out?
For model number WTW4955HW1
Hello James, Thank you for the question. You can manually turn the knob to the Drain cycle and let it run through the cycle. Please submit a new question if you have any follow ups. We are looking forward to hearing from you!
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
ordered hub and it shipped quickly. I was able to put the hub in place and screw the screws in. you want to tighten them down slowly and go around to each screw tightening a little at a time so you don't break the hub. as you tighten the screws down the hub slides down flush. its impossible to just push the hub on with your hand. Buttoned it back up and got caught up on laundry. good day when the washer is fixed.
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.