Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Megan
February 26, 2024
I can't seem to find my dryers exact model number. Is WTG86401UC/08 the same as WTG86400UC/08? My dryer is the 400.thx
For model number WTG86401UC-08
Hello Megan, thank you for writing in. These two WTG86401UC/08 and WTG86401UC-08 are the same models. Thank you and have a great day.
Was this helpful?
Thank you for voting!
< Prev
1
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
You tube videos use to guide me. Cleaned it sump area. Still not work. Guessed it was pump. 5 hours over a period of 2 weeks Ordered pump. Replaced it. Problem solved. 5 or so more hours. Most of work opening side panel
Power OFF. Move dryer away from the wall. Make sure the knob is in the "OFF' position. Remove screws (2) holding top cover from back of dryer. Remove "BOSCH" cover plate from left side of front cover. There is a screw here holding the cover to the frame. Gently pry cover away from framework, being careful not to damage the cover clips. Once away from the dryer, remove the plug from the board. You will need to remove the board from the back of the cover to gain access to the knob. Make sure the knob aligns with the "OFF" position before reassembly. Reverse the the instructions for reassembly.
