WTG86401UC/07 Bosch Dryer - Overview
Sections of the WTG86401UC/07
[Viewing 1 of 1]
Keep searches simple, eg. "belt" or "pump".
LATCH
PartSelect #: PS17243540
Manufacturer #: 10022250
This approximately 3-inch long and 2-inch-wide door latch is used to secure the dryer door, and ensure it does not open while the appliance is in operation. This latch is made of durable white plastic...
$46.12
In Stock
COVER
PartSelect #: PS17630106
Manufacturer #: 11059921
This cover provides protection for internal components, helping maintain a clean and safe appliance interior. Made from durable materials, it ensures a secure fit and long-lasting performance. Install...
$108.98
In Stock
00 Fluff Filter
PartSelect #: PS11724770
Manufacturer #: 00752387
If your dryer isn’t drying as well as it used to, the lint filter might be the problem. This replacement fluff filter catches lint and dust from your clothes, helping air flow freely and keeping your ...
$60.96
In Stock
COVER
PartSelect #: PS11771120
Manufacturer #: 10001811
A dryer door that pops open or will not latch may have a damaged cover, latch, or strike. The latch cover shields nearby parts from lint, dust, and accidental contact while helping support proper door...
$17.09
In Stock
HOOK
PartSelect #: PS8747159
Manufacturer #: 00623811
Keep your dryer running smoothly with this replacement door hook. It locks the door shut during cycles so your clothes dry safely and efficiently. If your old hook is broken or the door won’t stay clo...
$41.53
In Stock
Drum Bearing
PartSelect #: PS8728431
Manufacturer #: 00618931
This drum bearing supports smooth and stable drum rotation by reducing friction during operation. Designed for strength and longevity, it is commonly replaced when excessive noise, vibration, or resis...
$44.07
In Stock
BELT-DRIVE
PartSelect #: PS8731737
Manufacturer #: 00657917
This drive belt is a replacement mechanical component designed to transfer power between moving assemblies. It supports smooth, consistent operation and is commonly replaced when stretched, cracked, o...
$52.87
In Stock
PUMP
PartSelect #: PS8770262
Manufacturer #: 00145623
If your Bosch dryer isn’t draining properly, this pump might be the solution. It helps remove water from inside the dryer so your clothes dry efficiently. Built to fit select Bosch, Thermador, and Gag...
$235.00
In Stock
HEAT EXCHANGER
PartSelect #: PS10061181
Manufacturer #: 11003806
This heat exchanger efficiently transfers heat within the system to support stable and energy-efficient operation. Proper heat exchange improves performance consistency and helps protect internal comp...
$207.75
In Stock
ELECTRODE
PartSelect #: PS12072220
Manufacturer #: 11018215
This genuine OEM moisture sensor helps your dryer detect how damp the laundry is so it can adjust cycle times and prevent over-drying. It replaces a worn or faulty sensor that may cause the dryer to r...
$72.30
In Stock
Dryer Blower Belt
PartSelect #: PS8726307
Manufacturer #: 00604866
This blower belt is for dryers. Blower belt rotates to turn the blower wheel.
$39.01
In Stock
Common Symptoms of the WTG86401UC/07
[Viewing 3 of 3]Door won’t close
Fixed by
these parts
these parts
Show All
Door Pops Open
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
DR error stopped machine. Had to diagnose problem.
You tube videos use to guide me.
Cleaned it sump area. Still not work.
Guessed it was pump. 5 hours over a period of 2 weeks
Ordered pump.
Replaced it.
Problem solved.
5 or so more hours. Most of work opening side panel
Cleaned it sump area. Still not work.
Guessed it was pump. 5 hours over a period of 2 weeks
Ordered pump.
Replaced it.
Problem solved.
5 or so more hours. Most of work opening side panel
Parts Used:
-
Lawrence from SARASOTA, FL
-
Difficulty Level:Difficult
-
Total Repair Time:More than 2 hours
-
Tools:Nutdriver, Screw drivers
8 of 11 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Front cover had a broken lense over the control panel. Upon replacement of the cover I broke the knob off. I would recommend that you purchase the knob instead of doing it twice like I did.
Power OFF. Move dryer away from the wall. Make sure the knob is in the "OFF' position. Remove screws (2) holding top cover from back of dryer. Remove "BOSCH" cover plate from left side of front cover. There is a screw here holding the cover to the frame. Gently pry cover away from framework, being careful not to damage the cover clips. Once away from the dryer, remove the plug from the board. You will need to remove the board from the back of the cover to gain access to the knob. Make sure the knob aligns with the "OFF" position before reassembly. Reverse the the instructions for reassembly.
Parts Used:
-
Frank from SPRING BRANCH, TX
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
2 of 2 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!