This approximately 3-inch long and 2-inch-wide door latch is used to secure the dryer door, and ensure it does not open while the appliance is in operation. This latch is made of durable white plastic and features a metal latch in its center. If your dryer door is having issues latching shut completely, this door latch is likely the cause...Read more and will need replacing. This latch does not include any securing hardware, such as screws, and is an individually sold OEM part.
This cover provides protection for internal components, helping maintain a clean and safe appliance interior. Made from durable materials, it ensures a secure fit and long-lasting performance. Installation is quick—align the cover with its mounting points and secure it using the appropriate fasteners.
If your dryer isn’t drying as well as it used to, the lint filter might be the problem. This replacement fluff filter catches lint and dust from your clothes, helping air flow freely and keeping your dryer running efficiently. It’s easy to clean with warm water and dish soap, and it’s made to fit select Bosch, Thermador, and Gaggenau mode...Read morels. Swapping out a worn filter can help prevent overheating and improve drying performance.
A dryer door that pops open or will not latch may have a damaged cover, latch, or strike. The latch cover shields nearby parts from lint, dust, and accidental contact while helping support proper door operation. First check the door alignment, hinges, lock, and plastic mounting tabs for wear. Match the replacement to the full appliance mo...Read moredel because similar covers may attach in different ways. Disconnect power before opening the cabinet, keep screws and clips organized, and avoid overtightening plastic parts. Test the door several times before running a drying cycle.
This drum bearing supports smooth and stable drum rotation by reducing friction during operation. Designed for strength and longevity, it is commonly replaced when excessive noise, vibration, or resistance develops, helping restore quiet and balanced performance.
This drive belt is a replacement mechanical component designed to transfer power between moving assemblies. It supports smooth, consistent operation and is commonly replaced when stretched, cracked, or slipping during use.
This door ring frames the dryer opening and helps maintain a proper seal, supporting efficient drying and preventing heat loss. Made from durable white plastic, it serves as a reliable replacement when the original ring becomes worn or damaged, and it installs easily on select models. To ensure the right fit, check your dryer’s model details before purchasing.
If your Bosch dryer isn’t draining properly, this pump might be the solution. It helps remove water from inside the dryer so your clothes dry efficiently. Built to fit select Bosch, Thermador, and Gaggenau models, it’s a reliable replacement for a worn-out or faulty pump. Just make sure to unplug your dryer before installing.
Heat or moisture leaking around the dryer door may point to a bent frame, damaged window, or poor seal. A replacement door and window assembly can restore safe closing and a clear view of the drum. First inspect the door seal, hinges, latch, and cabinet opening. Match the new assembly to the complete appliance model because similar doors ...Read moremay mount in different ways. Disconnect power before starting and ask another person to hold the door if it is heavy. Do not use the dryer with cracked glass or a door that will not stay shut.
This heat exchanger efficiently transfers heat within the system to support stable and energy-efficient operation. Proper heat exchange improves performance consistency and helps protect internal components from overheating. Replacing a damaged exchanger restores optimal thermal efficiency and reliability.
This genuine OEM moisture sensor helps your dryer detect how damp the laundry is so it can adjust cycle times and prevent over-drying. It replaces a worn or faulty sensor that may cause the dryer to run too long, stop too soon, or display error codes. Designed for select models, it provides a durable, reliable solution for restoring accurate moisture sensing and efficient drying performance.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Charles - For model number WTG86400UC
April 2, 2023
Instructions on how to replace a broken door latch
Hello Charles, thank you for the question. Open the dryer's door. Unscrew the two screws over the cover of the door latch. Remove the cover over the door latch. Now push the door latch slightly up, then pull forward to remove it and replace the door latch. We hope this helps.
1 personfound this instruction helpful.
Was this helpful?
Thank you for voting!
Andre - For model number WTG86400UC
March 19, 2020
E2 code
Hello, Thank you for your question. I apologize for the inconvenience, I see this is usually an issue with the thermistor, however there is not located in your dryer. I would recommend reaching out to the manufacturer directly. Feel free to check back after you speak with them. We hope this helps.
Was this helpful?
Thank you for voting!
Christina - For model number WTG86400UC
December 31, 2023
Dryer model number wtg68400uc/07. I am looking for the piece that sticks out and goes into the latch opening. I am also looking for instructions to dismantle the door. I suppose if I found instructions to change the hinge, it would show me what I need to know.
Any help you can give would be greatly appreciated.
Thank you,
Hello Christina, thank you for reaching out. According to our research, the part you are looking for does not come separately. It comes with the door window, part number PS12367365. You can replace the door window by following these simple steps. First unplug the appliance, then open the door window, and remove the screws that are holding it with the front panel of the dryer. Then remove the door window and follow back the same steps to install the new door window. Glad to be of assistance!
I need the door at the bottom left of the front panel that houses the condenser. One of the hinges broke, but I can't find the part listed.
Hi Karl,
Thank you for your question. The part number listed under your model number for the cover is PS11728865. This part was listed under the motor diagram. If you need help placing an order for it, customer service is open 7 days a week and anyone will be happy to assist you. Please feel free to give us a call. We look forward to hearing from you!
The plastic white door hinge (the hinge holding the door in place, not the latch that locks the door) broke, but I can’t find the part to fix this. Would anyone know what I would need for this?
Hello Ian, thank you for writing. The Hinge( Cover) is PS11771120. We hope this helps.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
DR error stopped machine. Had to diagnose problem.
8 of 11 peoplefound this instruction helpful.
Lawrence from SARASOTA, FL
Difficult
More than 2 hours
Nutdriver, Screw drivers
You tube videos use to guide me. Cleaned it sump area. Still not work. Guessed it was pump. 5 hours over a period of 2 weeks Ordered pump. Replaced it. Problem solved. 5 or so more hours. Most of work opening side panel
My Orders
