WT7400CV (ASSEUUS) LG Washer - Overview

Diagrams for WT7400CV

See every part. Know exactly what you need.

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Pulsator Cap – Part Number: 5006EA3009B
$45.05
In Stock
Pulsator Cap
★★★★★
★★★★★
(1)
Part #5006EA3009B
This part is known as a pulsator cap or washplate cap, and is designed for your LG washer. It fits over the washplate mounting bolt and prevents clothes from getting caught on the washplate during a wash cycle. It is round in shape, and approximately 3 inches in diameter.
Washer drain Hose Assembly – Part Number: AEM73732901
$58.25
In Stock
Washer Switch Assembly sensor – Part Number: 6501EA1001R
$57.15
In Stock
VALVE ASSEMBLY,INLET – Part Number: AJU75152602
$129.83
In Stock
VALVE ASSEMBLY,INLET
★★★★★
★★★★★
(2)
Part #AJU75152602
This inlet valve assembly controls the flow of hot and cold water into your washer, ensuring the drum fills at the correct temperature during each cycle. Located at the back of the machine where the water hoses connect, it opens and closes as needed. If the valve is faulty, you may notice slow filling, no water flow, or water entering the drum when the washer is off. This genuine replacement part is sold individually and does not include supply hoses.
Screw – Part Number: FAB30598601
$24.15
In Stock
Drain Pump Assembly – Part Number: AHA75673404
$127.48
In Stock
Drain Pump Assembly
Part #AHA75673404
This drain pump assembly is responsible for removing water from your washer during the drain cycle. It is typically at the bottom of the washing machine and connected to the drain hose. If it is damaged, you may notice water not draining properly, unusual drain cycle noises, or a failure to move to the next cycle. This is a genuine replacement part sourced directly from the original manufacturer.
Motor Stator Bolt – Part Number: 4011FA4353B
$13.15
In Stock
Motor Stator Bolt
Part #4011FA4353B
Switch – Part Number: EBF61674802
$121.09
In Stock
Switch
Part #EBF61674802
This part is the replacement switch assembly for your top-load washer. It contains the switch mechanism and the connecting wire that hooks the door latch to the electrical system of the washer. The lid switch holds lets your washer know when the door is latched, so it can begin the wash cycle. If the lid switch is damaged, it will not allow the washer to run properly. Be sure to disconnect the washer from the power and water sources before you begin this repair. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.
MOTOR ASSEMBLY,DC,CLUTCH – Part Number: EAU64283201
$64.85
On Order
MOTOR ASSEMBLY,DC,CLUTCH
★★★★★
★★★★★
(1)
Part #EAU64283201
Keep your washer running smoothly with this clutch motor assembly. It helps the drum switch between washing and spinning so clothes get clean and water is removed efficiently. If your washer won’t spin, makes strange noises, or shows error codes, this part may be the fix. Just unplug the machine before replacing.
Common Washer – Part Number: FAF30369201
$13.15
In Stock
Common Washer
Part #FAF30369201
LEG ASSEMBLY – Part Number: 4263FA3933C
$43.95
Special Order
Holder – Part Number: 4930EA3002A
$13.15
In Stock
Holder
Part #4930EA3002A

Common Symptoms of the WT7400CV

How this model fails, and the parts that fix it.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
leg broke off inside housing
5 of 12 people found this instruction helpful.
  • thomas m from CARMICHAEL, CA
  • A Bit Difficult
  • Less than 15 mins
raised the front of washer by hand (literally) and placed two 2x4 blocks under front lip for support. reached up inside washer cabinet and unscrewed the broken leg piece upwards into the cabinet. this was the only way I could get the broken piece out without some specialized tool to reach it from the underside. replacement with the new leg was a breeze.
Was this helpful?
Thank you for voting!
Drain hose had a pin hole leak external to washer
3 of 6 people found this instruction helpful.
  • Terry from SIMI VALLEY, CA
  • Really Easy
  • 30 - 60 mins
  • Screw drivers
Very close to the installation video online at Parts Select. Removed the back panel, unclipped the hose from the inner fitting and replaced with the rear hose. Why it didn;t leak on the inside is interesting as there was no clip on the at the inner fitting.
The one difference from the existing install video online was that I didn't have to tip the washer over ~75 degs before replacing. I instead found that I could put to cinder blocks under the back edge to replace the drain hose. This made the job quicker without having to worry about having a box for it to rest on (with any risk of falling to the floor).
Was this helpful?
Thank you for voting!
WATER WAS NOT SHUTTING OFF
3 of 17 people found this instruction helpful.
  • cathy. from etna, OH
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
I HAD A CHAT WITH LG EXPLAINED THE PROBLEM . SAID IT WAS THE WATER SHUT OFF VALUE. V EVEN SENT THE PAGE WITH PART# TO ORDER ONLINE.

LOVE LG CHAT!!!
Was this helpful?
Thank you for voting!