This assembly comes with two shocks, four nuts, one leveling leg pin and instructions. These shock absorbers keep the washer from vigorous shaking during it's cycles.
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Donald
November 21, 2021
Does everything but spin.
For model number WSSH300G1WW
Hello Donald, Thank you for the question. One of the most common reasons a washing machine has stopped spinning is it can not drain properly due to a blocked drain pump or hose. We suggest checking the drain system for a clog or blockage. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Brandy
September 7, 2022
Washer will start and within seconds the Spin Option changes from Hi to No Spin shutting down the cycle.
For model number WSSH300G1WW
Hello Brandy, Thank you for the question. This could be an indication the Drive Motor is faulty and may need to be tested or replaced. We hope this solves your problem!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Charlie
September 15, 2022
Won't start no lights showing
For model number WSSH300G1WW
Hi Charlie, thank you for your inquiry. If your washer does not start, you will need to check for a blown fuse. Check if there are melted or loose wires. A burnt-out power outlet can prevent your washer from starting. Check your door latches and door switch. If your washer door is not closed properly, it will not start. A faulty timer can also prevent the washer from starting. Please submit a new question if you have any follow-ups.
Was this helpful?
Thank you for voting!
Orick
January 27, 2020
Water not coming into the tub .I cleared the filters.
For model number WSSH300G1WW
Hello and thank you for writing.
It certainly sounds like it could be a faulty water inlet valve and/or kinked or clogged hoses, you should check the part(s) for signs of damage, and replace it as needed. Please see the part links related to this question just beneath this answer. We hope this helps. Please contact us anytime if you require further assistance.
Removed 2 Hose clamps with pliers. Unplug power source from drain pump. Unscrew 2 mounting screws with 5/16" nut-driver then replace unit in reverse sequence...... Very simple.
after pulling pins and installing new shocks, the washer still made loud ,disturbing sounds during use. Did some more investigating, turns out the inner bearings on the drum are bad. Apparently a problem with this model. Probably why the original shocks broke in the first place.
