This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
July 5, 2024
water fill goes very slow almost like a drip
For model number WSLP1100A0WW
Hello John, thanks for reaching out. There are a few reasons you might be experiencing this symptom. First, we recommend checking the hoses coming into your washer - if they are obstructed, this could prevent water flow. Secondly, inspect the screen in the faucet adaptor, clean and replace if needed. Also, your water valve, aka water solenoid, may be faulty and not opening to let water into the tub properly. We hope this helps! Good luck with this repair.
checked wiring with circuit tester & found i have power to all switches.ordered new pcb board & plugged wiring into new board.installed covers over board.
