This water filter purifies water going to the water dispenser and sometimes the icemaker as well. This part should be replaced if it is causing reduced water flow or just replaced periodically per the...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This is a genuine replacement light bulb for a refrigerator. The inside of your refrigerator should illuminate when you open the door. If your fridge does not illuminate, you may need to replace this ...
This light switch may also be known as a refrigerator door switch or a light switch kit, and is compatible with your refrigerator. The function of the refrigerator door switch is to turn on the light ...
This is a replacement pivot block for your refrigerator. It is made of white plastic and is approximately 4 inches long and 1 inch wide. The pivot block catches and holds the door mullion cover when y...
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
Sold individually. This door bin is for refrigerators.
Door bin attaches to the inside of the refrigerator door and typically holds jars and bottles.
Follow the instructions in the owner's manua...
This genuine OEM replacement part is a water filter for your fridge or freestanding ice maker. The filter is used to remove contaminants and particles from the water, to ensure a clean and fresh taste...
This kickplate grille is attached to the bottom of the refrigerator.
$102.09
In Stock
Questions And Answers for WRX735SDBM02
Ask our experts a question about this model and we'll get back to you as soon as possible!
13 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Donna
March 26, 2020
“cooling off ”light on screen. Ice melted no water coming out. Nothing happens when i press buttons. What is the fix?
For model number WRX735SDBM02
Hello, Thank you for your question. Your refrigerator and freezer will not cool when cooling is turned off. When cooling is off, COOLING OFF will appear on the display screen. Press and hold LOCK and MEASURED FILL for 3 seconds again to turn cooling back on. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
James
May 24, 2023
Two problems.
My water dispenser is not flowing correctly hardly any water coming out
For model number WRX735SDBM02
Hi James, thank you for reaching out. Based on our understanding of the issue, we would suggest you check the Dispenser Actuator Pad, part number PS11753585, to fix both issues. We hope this solves your issue!
The water dispenser dispenses water randomly without putting a glass against the back operating panel.
For model number WRX735SDBM02
Hello Anne, thank you for reaching out. The problem appears to be due to a faulty dispenser actuator pad. You may need to replace the dispenser actuator pad, part number PS11753585. We hope this helps.
I’ve replaced the water filter but the light indicator will not go off and the panel also says ice maker off yet it’s working
For model number WRX735SDBM02
Hello Rosa, thank you for reaching out. The issue is most probably with the dispenser control board, part number PS11755928. Good luck with this repair!
Hi Anthony, thank you for getting in touch. First, you may need to make sure that the freezer temperature is not set too cold, and that the evaporator coils are clean. Also, ensure that the freezer door is not left open for too long. If that is not causing the issue, then you may need to check the freezer door gasket, part number PS11757265, as it is most likely damaged. The gasket is the rubber seal around the door that helps keep the cold air in and the warm air out. If this seal is damaged or not sealing properly, cold air can escape and warm air can get in, leading to frost and ice. If this part is faulty, you may need to replace it. Good luck with your repair!
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute.
I removed the drop-down outer housing by gently prying the sides of the two pivot pins at the rear. This gave me move 'room' to grip and slightly rotate then pull the old filter forward and away from the tight suction connection. I was concerned that I would be too forceful for the plastic assemblies and would break something; deliberate motions and a steady thought process on the problem helped disengage the darned old filter!
