Models
>
WRT8G3EWW
WRT8G3EWW Westinghouse Refrigerator - Overview
Sections of the WRT8G3EWW
[Viewing 6 of 6]Manuals & Care Guides for WRT8G3EWW
Click to downloadInstall
Installation Instructions
(0.84MB)
Install
Installation Instructions
(0.77MB)
Specs
Product Specifications Sheet
(0.77MB)
Care
Use and Care Manual
(0.77MB)
Wiring
Wiring Diagram
(0.77MB)
Keep searches simple, eg. "belt" or "pump".
Door Shelf Retainer Bar
PartSelect #: PS734935
Manufacturer #: 240534901
This manufacturer-certified Door Shelf Retainer Bar, sometimes otherwise known as the door rack or bar retainer, is a white, plastic part which can be easily installed onto the inside of the refriger...
$55.55
In Stock
Order within the next 3 hrs and your part ships today!
Drawer Support Rail - Right Side
PartSelect #: PS430917
Manufacturer #: 240530701
This manufacturer-certified drawer support rail supports the right side of the sliding drawer. It is a track that helps the drawer slide open and closed with ease. If you are having trouble opening or...
$69.85
In Stock
Order within the next 3 hrs and your part ships today!
Door Shelf Retainer Bar
PartSelect #: PS734936
Manufacturer #: 240534701
The Door Shelf Retainer Bar, also known as a refrigerator door rack, is a white, plastic part which can be easily installed onto your fridge door. It holds items in your fridge and will show physical...
$69.85
In Stock
Order within the next 3 hrs and your part ships today!
Crisper Glass Shelf Insert
PartSelect #: PS429963
Manufacturer #: 240350608
Glass only. This glass insert measures 23.82 x 15.50-in. This is an authentic Frigidaire replacement part. The crisper shelf insert is designed by the manufacturer for use in refrigerators. This part ...
$158.63
In Stock
Order within the next 3 hrs and your part ships today!
Drawer Support Rail - Left Side
PartSelect #: PS430916
Manufacturer #: 240530601
This drawer rail supports the left hand side of the sliding drawer.
$70.46
In Stock
Order within the next 3 hrs and your part ships today!
Door Handle
PartSelect #: PS427922
Manufacturer #: 218428101
This white handle can be used with both the freezer door and the fresh food door of many refrigerators. Note: As per manufacture this handle includes the mounting block and screw for the top of the ha...
$68.77
In Stock
Order within the next 3 hrs and your part ships today!
Light Bulb
PartSelect #: PS12751166
Manufacturer #: 316538904
Clear, 120 Volt, 40 Watt.
$25.08
In Stock
Order within the next 3 hrs and your part ships today!
Screw - Kit of Four
PartSelect #: PS12365992
Manufacturer #: 5304515677
This screw is used in refrigerators. The screw can be loosened or tightened with a Phillips-head or square-head screwdriver. This screw is used to secure the refrigerator handle to the refrigerator do...
$20.39
In Stock
Order within the next 3 hrs and your part ships today!
Meat Pan
PartSelect #: PS1526037
Manufacturer #: 240530811
This is the replacement meat pan for your refrigerator. It is made of clear plastic and is approximately 18 inches long and 13 inches wide. The meat pan slides into the bottom of the refrigerator shel...
$247.88
In Stock
Order within the next 3 hrs and your part ships today!
Refrigerator Door Gasket
PartSelect #: PS2331952
Manufacturer #: 241872513
This fresh food door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air outside.
$181.40
In Stock
Order within the next 3 hrs and your part ships today!
Defrost Timer - 120V 60Hz
PartSelect #: PS423802
Manufacturer #: 215846604
This is a 6hr 21 min defrost timer.
$41.36
In Stock
Order within the next 3 hrs and your part ships today!
Shelf Trim - Rear
PartSelect #: PS735086
Manufacturer #: 240561502
This is a replacement rear shelf trim for your refrigerator. It is approximately 24 inches long and 1 inch wide. The shelf trim is made of white plastic and is sold individually. You will find the rea...
$82.55
In Stock
Order within the next 3 hrs and your part ships today!
Questions And Answers for WRT8G3EWW
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
- < Prev
- 1
- Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ken
December 26, 2019
How do we change the door opening
For model number WRT8G3EWW
Hello Ken, thank you for your inquiry. Attached is a link that will help with your inquiry. Thank you.
https://www.youtube.com/watch?v=xIICeXtGPWs
Was this helpful?
Thank you for voting!
- < Prev
- 1
- Next >
Common Symptoms of the WRT8G3EWW
[Viewing 16 of 16]Door won’t open or close
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Fridge too warm
Fixed by
these parts
these parts
Show All
Door Sweating
Fixed by
these parts
these parts
Show All
Freezer not defrosting
Fixed by
these parts
these parts
Show All
Leaking
Fixed by
these parts
these parts
Show All
Light not working
Fixed by
these parts
these parts
Show All
Freezer section too warm
Fixed by
these parts
these parts
Show All
Fridge and Freezer are too warm
Fixed by
these parts
these parts
Show All
Will Not Start
Fixed by
these parts
these parts
Show All
Fridge runs too long
Fixed by
these parts
these parts
Show All
Frost buildup
Fixed by
these parts
these parts
Show All
Won’t start
Fixed by
these parts
these parts
Show All
Fridge too cold
Fixed by
these parts
these parts
Show All
Too warm
Fixed by
these parts
these parts
Show All
Clicking sound
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Refrigerator door gasket torn
No instructions included, so it took a little bit of staring at the new part to figure out how it works. The barbed ridge on the gasket fits into a slot on the door. The flat face of the gasket has an internal magnetic strip that helps keep the seal tight against the steel face of the refrigerator. Installation requires no tools. This is the basic process:
1) Unbox the new gasket and get it ready to install so you don't have to leave the fridge open too long.
2) Open the door and grab the old gasket at one of the corners and pull away. This will unseat the barbed ridge I mentioned above. Work your way around the door until the whole gasket is free.
3) Set aside the old gasket
4) Grab a moistened paper towel and wipe down the (now exposed) sealing surface of the fridge and door.
5) Align the new gasket in the door and start pushing the barb into place. I found that the new gasket seemed slightly oversize compared to the original, so it took a little tweaking. What worked for me was to get all the corners seated, then work my way around the door making sure the gasket is fully seated.
6) Once you have the new gasket installed, close the door to make sure everything fits OK.
7) Open the door again and run your finger along the inside edge of the gasket seal. What you want to do is fold the edge of the gasket down so it lays flat against the outer wall of the door.
8) Shut the door and look from the sides and top to try to spot any gaps. You should be able to poke the gasket from the side and get the magnet strips to click into place. It seems like after a day or so the gasket 'relaxed' and I didn't have to worry about this anymore.
9) Dispose of the old gasket. I was able to pull the gasket into four pieces (separating at the corners) so it would fit in my city trash can...
1) Unbox the new gasket and get it ready to install so you don't have to leave the fridge open too long.
2) Open the door and grab the old gasket at one of the corners and pull away. This will unseat the barbed ridge I mentioned above. Work your way around the door until the whole gasket is free.
3) Set aside the old gasket
4) Grab a moistened paper towel and wipe down the (now exposed) sealing surface of the fridge and door.
5) Align the new gasket in the door and start pushing the barb into place. I found that the new gasket seemed slightly oversize compared to the original, so it took a little tweaking. What worked for me was to get all the corners seated, then work my way around the door making sure the gasket is fully seated.
6) Once you have the new gasket installed, close the door to make sure everything fits OK.
7) Open the door again and run your finger along the inside edge of the gasket seal. What you want to do is fold the edge of the gasket down so it lays flat against the outer wall of the door.
8) Shut the door and look from the sides and top to try to spot any gaps. You should be able to poke the gasket from the side and get the magnet strips to click into place. It seems like after a day or so the gasket 'relaxed' and I didn't have to worry about this anymore.
9) Dispose of the old gasket. I was able to pull the gasket into four pieces (separating at the corners) so it would fit in my city trash can...
Parts Used:
-
Matthew from Washington, DC
-
Difficulty Level:Easy
-
Total Repair Time:Less than 15 mins
305 of 322 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Door handle broke off
First I removed the top screws, then I slide it off the lower screw that is hidden behind the handle. I replaced the handle by sliding it onto the bottem first then attaching it onto the top with the two top screws.
Parts Used:
-
Lisa from Linton, ND
-
Difficulty Level:Really Easy
-
Total Repair Time:1- 2 hours
-
Tools:Screw drivers
199 of 215 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Refrigerator would not run but interior light was on.
I unplugged the refrigerator, then opened the door and removed four screws holding the plastic electrical panel to the interior top of the main refrigerator compartment and noticed the cold control was corroded badly, apparently from moisture in the panel. I ordered a new one from partselect.com. When it arrived the next day, I then pulled off the control knob, unclipped the cold control, unplugged the three wires to the control, then removed the styrofoam insulation blocks holding the thermocouple wire and then removed the thermocouple wire to complete the removal. I then reversed the process to install the new thermostat and control. That is repositioned the thermocouple wire, put the insulation blocks back to hold the wire, then replugged the three electrical wires, clipped the control back and pushed the control knob back on and finally screwed the panel back to the top of the main compartment and plugged the refrigerator electrical cord back in to provide current to the refrigerator. It immediately started up and ran fine. Total time - about 8 minutes.
Parts Used:
-
Bruce from Alton, IL
-
Difficulty Level:Really Easy
-
Total Repair Time:Less than 15 mins
-
Tools:Pliers, Screw drivers
179 of 235 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!