This crisper pan, or drawer, is made for your refrigerator. The drawer has a controlled environment to ensure a proper humidity level to keep your produce fresh for longer. It is clear in color and ma...
This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.
The door shelf retainer bar end cap connects to the retainer bar on your refrigerator’s door shelf, and attaches it to the refrigerator door. If your shelf retainer bar has become disconnected, a dama...
This part is used to circulate air through the inside of the refrigerator to help improve the cooling efficiency.
$66.99
In Stock
Questions And Answers for WRT518SZFM00
Ask our experts a question about this model and we'll get back to you as soon as possible!
23 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Patty
July 22, 2022
Freezer is icing up and making noise if I let it defrost by unplugging it’s ok for awhile but it stats back up again
Do I need a new defrost heater and thermostat? If so can I install myself as I don’t have a policy
For model number WRT518SZFM00
Hello Patty, thank you for your writing. The Electronic Control PS12731071 controls the defrost functions. There is a separate Defrost Heater PS12349463. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
We have a 6 month old refrigerator. It works well except for one thing. We have frost building up on the top of the middle of the freezer door. The gasket looks good, and I don't feel any cold air coming out. The freezer seems to be running fine. I need to clean the frost out about once a week. Any ideas why?Tony
For model number WRT518SZFM00
Hi Tony, even if your gasket looks good I would try and clean it, wiping it down with soapy water. This is caused by to much warm air coming in. Thank you for your question and good luck with your repair!
2 people found this helpful.
Was this helpful?
Thank you for voting!
Glen
February 13, 2020
Can i purchase a complete glass shelf for the middle of my unit? I would like an additional one for more storage space. What is the cost?
For model number WRT518SZFM00
Hi Glen, thank you for your question. Yes, that would be this part: PS12712048. Searching that part number or clicking the link below will bring you to the part. The price will be listed on our site. If you are looking to purchase this part then you can do so by either adding it to your cart and going through the check out process online, or by calling our customer service line and ordering with one of our agents. We hope that helps. Good luck with your repair.
Hello Kay, thank you for getting in touch. We would suggest checking the thermistor, part number PS2580944. It senses the temperature inside the fridge and sends information to the electronic control. If faulty, it may cause the temperature in the fridge compartment to fluctuate. Testing the thermistor for continuity using a multimeter might help. Good luck with the repair!
The light bulb in my Whirlpool Refrigerator is not lighted up when door is open
For model number WRT518SZFM00
Hello Denise, thank you for your inquiry. Based on our research, the issue is most probably with the door switch, part number PS12728638. It turns the light on or off when you open or close the door. You may need to replace it to fix the issue. Glad to be of assistance!
The reason I repaired it myself was because the repairman that diagnosed the problem.didn't come back in two weeks. The evaporator fan sits behind a vented wall in the freezer and directs cold air into freezer and refrigerator.I removed the ice make assembly first and then the freezer wall held in place by two sheet metal nuts. Then removed wires from fan motor. Removed the fan blade from fan motor,which was press fitted on,then removed fan motor from bracket assembly(make sure and retain the two vibration rubber washers on back and front of motor. Reinstall new motor with vibration washers and press fan blade on new motor. Install in bracket assemble and reassemnble.
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again.
Looked up problem in your troubleshooting section, determined necessary part, ordered part on Saturday. Received part Tuesday. Installed in about 10 minutes. Works great. Saved about $200.00.
