This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.
This temperature sensor is for refrigerators.
The temperature sensor senses the temperature inside the refrigerator and sends information to the electronic control.
Unplug the refrigerator and s...
The door shelf retainer bar end cap connects to the retainer bar on your refrigerator’s door shelf, and attaches it to the refrigerator door. If your shelf retainer bar has become disconnected, a dama...
This part is the replacement compartment door for your refrigerator. It is made of clear plastic and is approximately 9 inches by 6 inches. The compartment door snaps into the walls of the dairy compa...
Ask our experts a question about this model and we'll get back to you as soon as possible!
10 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Frank
January 25, 2020
Does this Whirlpool fridge model use a defrost timer and if yes, what is the correct part number to order? Thank you.
For model number WRT318FZDW01
Hello Frank,
Thank you for your question. No, this fridge model does not have a defrost timer compatible. We hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Marilyn
February 7, 2024
Refrigerator is making noise and freezer is frosting up and refrigerator is not getting cold. Is there any coils to clean
For model number WRT318FZDW01
Hello Marilyn, thank you for your inquiry. Based on the description that you have provided, we would recommend checking the evaporator fan motor, part number PS11740359, to fix the issue. We hope this solves your problem!
Hi Ernie,
Thank you for your question. Your refrigerator has leveling legs, part number PS11731286, that you may use to adjust the height of the refrigerator with. To replace a levelling leg or adjust the leg on your refrigerator, carefully lift up the refrigerator and place a board under each side to support it. Then use channel lock pliers to adjust to the legs either to the proper height or to remove them. Use a level as you adjusting the height to make sure the refrigerator is levelled correctly. Once the legs have been adjusted, remove the boards. I hope this helps. Thank you and have a great day!
Was this helpful?
Thank you for voting!
Stephanie
March 24, 2020
Which glass shelf to order for over the crisper drawers. It is the lower shelf. What is the diminsions?
For model number WRT318FZDW01
Hello Stephanie, thank you for your inquiry. The correct shelf that goes above the crisper drawers is PartSelect number PS12711762. We apologize, but we do not have the exact dimensions for this part, but can guarantee it is the correct size to fit and function accordingly in your appliance. We hope this helps.
Was this helpful?
Thank you for voting!
Gary
July 4, 2023
What filter should be used for the icemaker?
For model number WRT318FZDW01
Hi Gary, thank you for the question. We have found that your model does not come with a filter. Glad to be of assistance!
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
I knew the chances of all the freon leaking out was unlikely so I looked at the wiring to the compressor and there was a capacitor and a starter/overload so i figured I would start there. I went on line and found the parts at this site and they were less than the minimum service call charge for a service tech so I figured what the heck let's give her a shot so I did give it a shot. I ordered the parts and they were there in less time than a service tech could come out and i installed the parts and guess what for 90.00 in parts and 15 minutes in time I repaired my refrigerator. Thanks guys, It took less time to order the parts than it did to make the repair so thanks, your website rocks and is very well designed so my hat is off to you guys!
The reason I repaired it myself was because the repairman that diagnosed the problem.didn't come back in two weeks. The evaporator fan sits behind a vented wall in the freezer and directs cold air into freezer and refrigerator.I removed the ice make assembly first and then the freezer wall held in place by two sheet metal nuts. Then removed wires from fan motor. Removed the fan blade from fan motor,which was press fitted on,then removed fan motor from bracket assembly(make sure and retain the two vibration rubber washers on back and front of motor. Reinstall new motor with vibration washers and press fan blade on new motor. Install in bracket assemble and reassemnble.
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again.
