This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.
Sold individually. Hardware not included. Roller only.
$44.00
In Stock
Questions And Answers for WRT311FZDT00
Ask our experts a question about this model and we'll get back to you as soon as possible!
8 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Brenda Caruso
March 3, 2020
I need a part for the deli draw. The track broke.
For model number WRT311FZDT00
Hello Brenda, thank you for your question. The track pieces for the deli drawer is Part #: PS11770244
for the left side and Part #: PS11775344 for the right side. I hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Jean
March 22, 2023
Need a part number for the kick thing at the bottom of refrigerator
For model number WRT311FZDT00
Hi Jean, thank you for contacting us. The part you are looking for is the toe grille, part number PS11728011. We hope that helps!
The freezer nob was struck so how do you get it to move to lower temp and is there a replacement part?
For model number WRT311FZDT00
Hi Helene, thank you for reaching out. We have researched the model and would suggest making sure the knob is not jammed because of the frost build-up. Defrosting the freezer might resolve this issue. If this is not the case, the issue might be with the bail control arm, part number PS12349220. If you observe any physical damage or deformation in the knob, you may replace it with part number PS11770260. We hope this helps!
i NEED A NEW ICE MAKER KIT.
CAN YOU PLEASE GIVE ME THE PART# OF A NEW KIT?
For model number WRT311FZDT00
Hi Rich, thank you for reaching out. The compatible ice maker assembly for your model is part number PS16660337. We hope this is what you were looking for!
Need the deli track. Not the whole thing. Just the flex track.
For model number WRT311FZDT00
Hi Andy, thank you for your inquiry. The right-hand track rail for your model is part number PS11775344, and the left-hand track rail for your model is part number PS11770244. Good luck with your repair!
I knew the chances of all the freon leaking out was unlikely so I looked at the wiring to the compressor and there was a capacitor and a starter/overload so i figured I would start there. I went on line and found the parts at this site and they were less than the minimum service call charge for a service tech so I figured what the heck let's give her a shot so I did give it a shot. I ordered the parts and they were there in less time than a service tech could come out and i installed the parts and guess what for 90.00 in parts and 15 minutes in time I repaired my refrigerator. Thanks guys, It took less time to order the parts than it did to make the repair so thanks, your website rocks and is very well designed so my hat is off to you guys!
The reason I repaired it myself was because the repairman that diagnosed the problem.didn't come back in two weeks. The evaporator fan sits behind a vented wall in the freezer and directs cold air into freezer and refrigerator.I removed the ice make assembly first and then the freezer wall held in place by two sheet metal nuts. Then removed wires from fan motor. Removed the fan blade from fan motor,which was press fitted on,then removed fan motor from bracket assembly(make sure and retain the two vibration rubber washers on back and front of motor. Reinstall new motor with vibration washers and press fan blade on new motor. Install in bracket assemble and reassemnble.
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again.