This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.
Metallic screw that is less than an inch long. Does not include the plastic washer.
$10.09
In Stock
Questions And Answers for WRT311FZDB01
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Larry
January 13, 2023
What model ice maker for this model?
For model number WRT311FZDB01
Hello Larry, thank you for your question. The Add On Icemaker is part PS11757273. We look forward to hearing from you.
Whirlpool refrigerator needs new door bin. Please tell me which one will fit.
Model: WRT311FZDB01
Serial #: VS92665066
Door Bin numbers on the bin itself: 2204812 M3 CAV1
For model number WRT311FZDB01
Hi Charlotte,
Thank you for your question. The part number for the door bin is PS11703474. We hope this helps!
The freezer is forming ice crystals and the refrigerator doesn’t seem as cold
For model number WRT311FZDB01
Hi Cindy, thank you for reaching out. The following parts need to be checked to fix the issue: the temperature sensor, part number PS11753996, defrost thermostat, part number PS11754118, and the evaporator fan motor, part number PS11740359. We hope this solves your problem. If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
I knew the chances of all the freon leaking out was unlikely so I looked at the wiring to the compressor and there was a capacitor and a starter/overload so i figured I would start there. I went on line and found the parts at this site and they were less than the minimum service call charge for a service tech so I figured what the heck let's give her a shot so I did give it a shot. I ordered the parts and they were there in less time than a service tech could come out and i installed the parts and guess what for 90.00 in parts and 15 minutes in time I repaired my refrigerator. Thanks guys, It took less time to order the parts than it did to make the repair so thanks, your website rocks and is very well designed so my hat is off to you guys!
The reason I repaired it myself was because the repairman that diagnosed the problem.didn't come back in two weeks. The evaporator fan sits behind a vented wall in the freezer and directs cold air into freezer and refrigerator.I removed the ice make assembly first and then the freezer wall held in place by two sheet metal nuts. Then removed wires from fan motor. Removed the fan blade from fan motor,which was press fitted on,then removed fan motor from bracket assembly(make sure and retain the two vibration rubber washers on back and front of motor. Reinstall new motor with vibration washers and press fan blade on new motor. Install in bracket assemble and reassemnble.
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again.