This is an OEM replacement ice and water filter for your refrigerator. In side-by-side refrigerators, it is found in the top right corner or the bottom left grille. In bottom-freezer refrigerators, th...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This compressor start relay is for refrigerators. The compressor start relay attaches to the compressor and helps start the compressor motor. Safely store any food that could deteriorate while the pow...
Sold individually. This door bin is for refrigerators.
The door bin attaches to the inside of the refrigerator door and typically holds jars and bottles.
If your refrigerator or freezer is too warm, or making noises, you may need to replace the fan blade. The fan blade attaches to the evaporator motor, which is in the freezer section, to help circulate...
Sold Individually. - * Part may differ in appearance, but functions same as original.
$31.13
In Stock
Questions And Answers for WRSA71CIHZ00
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Elizabeth
August 23, 2023
Recently had to have compressor relay changed--not a DIY job. Fridge/freezer were empty and off, doors open for two days. I removed the ice bin during this time to empty it and let everything dry out.
Once the tech finished replacing the relay. I put everything back together. Freezer forms ice and dumps to bin.
BUT--since repair--when I "ask" it to dispense ice, the motor runs, but it sounds as if the bin rotor hangs up on ice and it just bumps around--as if the teeth on the augur hang up on something and then ride up over it. Ice blades spin freely and independently in bin. When I spin from the bottom, sometimes they hang up.
For model number WRSA71CIHZ00
Hi Elizabeth, thank you for your inquiry. We have concluded that the issue is with auger motor drive shaft, part number PS11751328. We would recommend checking the auger motor drive shaft to fix the issue. We hope this sort out your problem!
How to check and change auger motor driveshaft? Thanks
For model number WRSA71CIHZ00
Hi Elizabeth, thank you for reaching out. To check the auger motor drive shaft, you may need to see the edges of the shaft. If the edges of the drive shaft got stripped, you may need to replace the drive shaft.
To replace the shaft, follow the instructions:
1) Push the button on the side of the ice bucket to release the latch and lift the bucket.
2) Un-thread the screws using the quarter-inch socket to remove the holder.
3) Use the pliers to pull out the auger motor drive shaft.
For reinstallation of the new auger motor drive shaft, follow the instructions backward. We hope this information helps!
Was this helpful?
Thank you for voting!
Peter
February 13, 2023
My ice maker quit I replaced the top unit ice maker and new solenoid the double one the water flows in water despenser but not to ice maker line is clear I notice arm in up position how does that cycle down to start ice making I must admit I pulled the original down thinking it was frozen and broke arm I replace all that at this time need to know next step thanks
For model number WRSA71CIHZ00
Hi Peter, thank you for reaching out. If you have just installed a new ice maker, please allow 24 hours before it starts to make ice. The arm should be in the up position until it cycles. The ice maker has an automatic shutoff to keep the storage bin from overfilling during normal operation. As ice is made, the ice cubes will fill the ice storage bin, and the ice cubes will raise the shutoff arm to the off or up position. When the storage bin is at full capacity, the ice maker will automatically stop ice production, but the ice maker on and off switch will remain in the on or up position. Try and press the on and off switch and then lower the arm manually to see if this helps. If this is not helping, then we would recommend checking the switch, part number PS12728638. We hope this helps, good luck with the repair!
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again.
First I removed the old lightbulb from the socket and replaced it with a new one to confirm that the bulb was not the problem. I then pryed the socket out with a flat-head screwdriver. I could tell that the socket was anchored in its hole with clips so it was relatively easy to pry it out. Once the socket was out, I disconnected the lead wires and ordered a replacement socket kit from Partselect. When the new one arrived, I reconnected the lead wires to it, snapped it back into its hole, screwed in a new lightbulb, and presto!! The light was back on with no further problem. Thank you, Partselect!! A $15.00 part saved me what probably would have been at least a $100. service call and heaven knows what the technician would have told me I needed!!!
An easy job for smaller hands. Removed the two bolts holding the light cover. Removed two electrical connections from the old switch by pinching the retaining clip,removed the switch, snapped in the new one and re-attached the connectors. Your online illustrations helped me to know that the plastic housing for the light switch would only swing down so far and was not intended to be removed. Saved me from breaking that plastic cover's tabs. This home repair saved me more than 5 times the cost of hiring a professional to do it. Very happy homeowner.