This is an OEM replacement ice and water filter for your refrigerator. In side-by-side refrigerators, it is found in the top right corner or the bottom left grille. In bottom-freezer refrigerators, th...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This compressor start relay is for refrigerators. The compressor start relay attaches to the compressor and helps start the compressor motor. Safely store any food that could deteriorate while the pow...
This light switch may also be known as a refrigerator door switch or a light switch kit, and is compatible with your refrigerator. The function of the refrigerator door switch is to turn on the light ...
Sold individually. This door bin is for refrigerators.
The door bin attaches to the inside of the refrigerator door and typically holds jars and bottles.
If your refrigerator or freezer is too warm, or making noises, you may need to replace the fan blade. The fan blade attaches to the evaporator motor, which is in the freezer section, to help circulate...
This mounting screw is a genuine OEM replacement part for the door handle in your refrigerator. If you are having trouble shutting the refrigerator door, or opening it, replacing this screw can help s...
Ask our experts a question about this model and we'll get back to you as soon as possible!
17 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Larry
February 23, 2020
I installed new ice maker, it worked once in 72 hours. Arm will not drop down into ice container. How do i get the arm to signal ice level lowto the ice maker
For model number WRS571CIDM01
Hi Larry,
Thank you for your question. If you have just installed a new ice maker, please allow 24 hours before it starts to make ice. The arm should be in the up position until it cycles. The ice maker has an automatic shutoff to keep the storage bin from overfilling during normal operation. As ice is made, the ice cubes will fill the ice storage bin, and the ice cubes will raise the shutoff arm to the OFF (arm up) position. When the storage bin is at full capacity, the ice maker will automatically stop ice production, but the ice maker On/Off switch will remain in the ON (up) position. Try and press the on/off switch and then lowering the arm manually to see if this helps. If it not you may have to refer to the diagnostics tech sheet that came with your refrigerator or contact Whirlpool for more information. I hope this helps. Thank you and have a great day.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Barbara
November 27, 2019
Fridge not cooling
For model number WRS571CIDM01
Hello Barbara, thank you for writing. You will want to replace the Evaporator Fan Motor, part number PS11740362 for your model refrigerator to fix this. Good luck with your repair!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Karen
15 days ago
I need a new ice maker and want to know that I am ordering the correct replacement. Thank you.
For model number WRS571CIDM01
Hello Karen, thank you for getting in touch. The compatible ice maker for your model is part number PS11738120. If you need help placing an order, customer service is open 7 days a week!
Hello,
Serial #HR70601 188
my freezer does not have an emitter control board access door in the freezer compartment.I am having a problem with the ice bin clumping ice.I have replaced both water inlet sol valves, Ice door assembly and Ice maker.
What am I missing?
I think my ice tray is overfilling.I read online the emitter board controls water level but no one seems to know where mine is located or does this model even have one?
Thank you in advance for any help you can provide.
Happy Holiday!
For model number WRS571CIDM01
Hi Donald, thank you for the question. According to our research, your model does come with an emitter board. The part number of the emitter board compatible with your model is PS11738093. Please contact us anytime if you require further assistance!
My freezer keeps making a clicking sound when trying to dispense ice. I noticed there’s like a washer that suppose to hold the bar down that spins so it’s not loose when spinning. You have the part number for this I believe in the diagram it’s part # 5.
For model number WRS571CIDM01
Hello Louie, Thank you for the question. Item #5 in the Motor and Ice Container parts is the Spring Part #: PS11731230. We hope this helps.
I used a flat-head screwdriver to pop out the old light rocker switch. Then, I unplugged the wires, plugged them into the new light rocker switch, and then popped the new switch into the hole. That's it! Lights began working again.
First I removed the old lightbulb from the socket and replaced it with a new one to confirm that the bulb was not the problem. I then pryed the socket out with a flat-head screwdriver. I could tell that the socket was anchored in its hole with clips so it was relatively easy to pry it out. Once the socket was out, I disconnected the lead wires and ordered a replacement socket kit from Partselect. When the new one arrived, I reconnected the lead wires to it, snapped it back into its hole, screwed in a new lightbulb, and presto!! The light was back on with no further problem. Thank you, Partselect!! A $15.00 part saved me what probably would have been at least a $100. service call and heaven knows what the technician would have told me I needed!!!
I used a flat screwdriver and released the lock tab on the bottom of the light switch, and pried the switch out, being careful to not damage the plastic around the mounting place of the switch, unplugged wiring from old switch, plugged in the new one and pushed the new switch into place. Job finished light switch now working.
