This manufacturer-approved Refrigerator Pantry End Cap Kit, also known as the Refrigerator Drawer Support, is a kit containing all parts of the Pantry End Cap. It snaps into place on the appliance’s ...
This water filter purifies water going to the water dispenser and sometimes the icemaker as well. This part should be replaced if it is causing reduced water flow or just replaced periodically per the...
This OEM Center Rail is a white plastic part which supports the crisper frame, which holds the crisper. Fifteen inches long and white in colour, if broken, the support may no longer hold properly. Re...
The pantry drawer lid helps keep everything inside the drawer, it acts as a cover and keeps your drawer at the proper temperature by creating a seal. If the door will not open or close, or if the draw...
This water filter bypass cap is a genuine OEM component designed for select Whirlpool, Maytag, KitchenAid, and affiliated refrigerator models. Installed in place of the water filter, it allows uninter...
This is a genuine replacement light bulb for a refrigerator. The inside of your refrigerator should illuminate when you open the door. If your fridge does not illuminate, you may need to replace this ...
This light switch may also be known as a refrigerator door switch or a light switch kit, and is compatible with your refrigerator. The function of the refrigerator door switch is to turn on the light ...
This is a replacement pivot block for your refrigerator. It is made of white plastic and is approximately 4 inches long and 1 inch wide. The pivot block catches and holds the door mullion cover when y...
Made from durable, transparent plastic, this door shelf bin attaches to the inside of the refrigerator door to store small items like condiments and jars. It’s compatible with select Whirlpool, Maytag...
This part allows the cold air from the freezer section to be aired into the fresh food section and it is controlled by the thermostat.
$184.20
In Stock
Questions And Answers for WRF555SDFZ05
Ask our experts a question about this model and we'll get back to you as soon as possible!
16 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Gilbert
December 28, 2022
INTERIOR LIGHTS GOING OUT
For model number WRF555SDFZ05
Hi Gilbert,
Thank you for your question. If the lights inside the refrigerator are not working, you will need to check the light switch, the LED module and the light socket. We have included a link that you may reference on how to check these parts. Once you have determined the part you need, please feel free to call customer service. We are open 7 days a week and anyone will be happy to assist you. We look forward to hearing from you!
Hi Edward,
Thank you for your question. If the door ajar icon is lit, see if the doors are sealing properly. According to the Whirlpool website, if the doors are not making contact with the door switch the door ajar symbol will appear on the display. Check to make sure bins, shelves or food packages are not preventing the door(s) from closing correctly. Check to make sure the refrigerator is leveled front to back and side to side to ensure the door switch is making proper contact. Check to make sure the floor under the refrigerator is also level. If the floor is not level shims may need to be used. If you have any questions, please let us know. We look forward to hearing from you!
1 personfound this helpful.
Was this helpful?
Thank you for voting!
John
June 12, 2023
Ice bin is stuck, cannot remove it. It still makes ice and can hear auger moving. What are the steps to remove bin to troubleshoot problem.
Thanks
For model number WRF555SDFZ05
Hi John, thank you for the great question. We have researched your model and found a relevant video to help you. It may not be an exact module, but it will help you remove the bin. We hope this is what you were looking for!
1 personfound this helpful.
Was this helpful?
Thank you for voting!
Peter
April 3, 2024
The ice maker stopped working. At first the water dispenser stopped, honestly don't know what I did to get it working again, but the ice maker is still not working
For model number WRF555SDFZ05
Hello Peter, thank you for reaching out. Based on the description that you have provided, we would recommend checking the water inlet valve, part number PS11775241, to fix the issue. It supplies water to the refrigerator ice maker and water dispenser. We hope this solves your problem!
I can’t get my ice bin out I think it’s has frozen up I can hear the motor running when I’m trying to to get ice but only one or two pieces make come out
For model number WRF555SDFZ05
Hi Marilyn, thank you for reaching out. If the ice bin is frozen, you can try defrosting it. Leave the freezer door open for a while to allow the ice to melt. You can also use a hair dryer on a low setting to warm the area around the ice bin gently, but be careful not to overheat any plastic parts. Sometimes, ice cubes can get stuck and block the mechanism. Carefully check for any visible obstructions and remove them. We hope this solves your problem!
Was this helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
Pressed in the end of the filter cover, lowered it down part way. Twisted the old filter 1/4 turn and removed it. Set in the sink to drain. Inserted new filter and twisted it to lock. closed cover. Done. Total time @ 1 Minute.
Removed the fruit & veggie drawers & the deli (pantry) drawer. Took out the 3 screws, removed the attached parts, put them on the replacement part, reattached it and put the drawers back in.
Here's the part I want to share: PartSelect had a expanded diagram showing the correct part and sufficiently detailed to figure out the repair before the part arrived. That's why I ordered from them. Secondly, I ordered the part Thursday morning--and the thing was sitting on my porch when I came back in from my evening out Saturday--2 days later!!!
Remove food off of lower shelf, remove the two produce drawers, remove large lower drawer, remove glass shelf, remove three screws holding end cap in place. Once end cap was removed the drawer track could be removed and placed on new end cap. Installation of new end cap took less than 5 minutes. Most of the time spent was removing/replacing food and cleaning the shelf/bins. PartSelect was awesome BTW!
