Glass and centre support is NOT included. Must be ordered separately. This frame along with the glass provides the crisper drawer for fresh storage of vegetables
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This board will need to be programmed upon installation. The electronic control board is used in refrigerators to monitor and manage the temperature settings, such as cooling or defrosting times. If y...
Sold individually. Crisper drawer is an original equipment manufacturer (OEM) part that fits some bottom-freezer Kenmore, Amana, Crosley, Jenn-Air, KitchenAid, Maytag and Whirlpool refrigerators.
T...
This is a replacement pan glide for your refrigerator. The pan glide can be found attached to the refrigerator shelf, and allows the pan to slide in and out efficiently. If your refrigerator pan will ...
This is a deli drawer glide for the right side of your refrigerator. It allows the deli drawer to glide in and out smoothly. In order to access your glider, you will have to remove drawer and shelf, a...
$14.20
In Stock
Questions And Answers for WRB322DMBB00
Ask our experts a question about this model and we'll get back to you as soon as possible!
12 questions answered by our experts.
< Prev
1
2
3
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jude
March 23, 2023
Why is my bottom freezer have like frost snow all over my food?
For model number WRB322DMBB00
Hi Jude, thank you for reaching out. Based on the description that you have provided, we would recommend checking the freezer gasket, part number PS11754714, is properly sealed. The gap between the door gasket allows the air moisture in the freezer which causes frost on the food. You also need to check the thermistor, part number PS2003772, and the damper control assembly, part number PS11756642. We hope this sorts out your problem!
I need the sensor for this refrigerator it says 16397 on the piece Please advise
For model number WRB322DMBB00
Hello Deb, thank you for your question. The Sensor or Thermistor is PS2003772. We have an installation video on our site for your convenience. Good luck with this repair.
Where is the darn water filter compartment so I can replace the water filter for the ice maker?
For model number WRB322DMBB00
Hi AnnMarie, thank you for contacting us. Please follow these instructions.
The water filter compartment is located on the right-hand side of the refrigerator's ceiling.
1. If applicable, press upward on the water filter cover to access the filter.
2. To remove the filter, turn it anticlockwise and pull it straight out.
Note: There may be some water in the filter. Some spilling may occur. Use a towel to wipe up any spills.
3. Remove the sealing label from the replacement filter and insert the filter end into the filter head.
4. Turn the filter clockwise until it stops.
5. Flush the water system.
Press and hold the Reset Filter button after replacing the water filter for 3 seconds. The Order and Replace indicator lights will blink and then go off when the system is reset. We hope this is helpful!
Was this helpful?
Thank you for voting!
Ray
November 12, 2019
What year was this made
For model number WRB322DMBB00
Hello Ray, Thank you for the question. Very sorry but PartSelect.com does not have the size or age of the appliances, just the parts list. I would recommend contacting the manufacture. Hope this helps!
Was this helpful?
Thank you for voting!
Peggy
January 31, 2022
My refrigerator door swings and hits wall. Need some thing to keep from swinging 180
For model number WRB322DMBB00
Hello Peggy, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS11743553 for the Door Stop that prevents the door from opening too far. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Having seen this problem before in other equipment so I had an idea where to look. Problem: the automatic defrost function was not operating. Looking through openings in the back panel of the freezer compartment, you could see the evaporator coils and fins were a solid chuck of ice. There are three logical components to check. Heater element, thermostat (located just above the evaporator) and a relay on the control board (located in the fridge control panel). Checked the heater with an ohm meter -- OK. The thermostat closes the circuit at around 20 degrees and opens at around 32 degrees. Pulled out the thermostat, wiring, fan unit. Everything unplugs, unscrews, and unclips, don't cut wires. Put the whole assembly in a friends freezer for an hour or so to see if the thermostat closes -- OK. Problem had to be with the control board. Replaced control board, reprogrammed it per included instruction. Everything is working again.
The hard part for me was figuring out which part was causing the problem. I read what others had done and followed their test methods. I checked the defroster heater for continuity and the defroster thermostat to make sure it was closing. the defroster termostat has to be cold to check it. You will need to check it while it is in ice or take it out and put it in another freezer for 30 mins and then check it for continuity. Those items checked out ok so it had to be the control board. The control board is a 5 min job to replace but making sure that is your problem is the hard part. I think the control board was bad due to a power surge we had when the power went out and came back on. It might be a good idea to put a surge protector on your home to protect your fridge and all your other electronic stuff. Our refrigerator is now working like new again. Thank you for all your help, Jim
