This 40w light bulb is a replacement bulb constructed of glass and metal. It is an easy-to-install electrical part which produces 40w of light. If the bulb won't light up then it may be broken and sho...
$11.31
In Stock
Order within the next 8 hrs and your part ships today!
This Grease Filter is constructed of Acrylonitrile Butadiene Styrene and is used to trap grease and help eliminate odors from the exhaust air while cooking. It attaches onto the exhaust and is rated ...
$45.19
In Stock
Order within the next 8 hrs and your part ships today!
This three-terminal switch fits your microwave door. This part is mostly black in color and is about 1.5 inches with metal terminals. You might need to replace this part if your microwave is not heati...
$13.20
In Stock
Order within the next 8 hrs and your part ships today!
This door interlock switch is for microwaves.
Door interlock switch prevents the microwave from starting when the door is open.
Because the microwave shielding and interlock switches must be pro...
$42.95
In Stock
Order within the next 8 hrs and your part ships today!
The light socket in your microwave houses the light bulb and connects it to the power source. The light bulb will screw into it, so the light bulb will be held in place. Be very careful when installin...
$14.20
In Stock
Order within the next 8 hrs and your part ships today!
Order within the next 8 hrs and your part ships today!
Questions And Answers for WMH32519FS0
Ask our experts a question about this model and we'll get back to you as soon as possible!
8 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Ed
July 29, 2021
Start on control panel doesn't work
For model number WMH32519FS0
Hello Ed, Thank you for the question. The Start Button is the most used button so it can wear out over time. The Touch Pad is only sold as part of the Panel, so the front Control Panel will need to be replaced. We hope this helps!
Hello David and thank you for writing.
You might have some debris in the light socket themselves unplug the unit then take the bulbs out and see if the metal contacts are clean. We hope this helps. Please contact us anytime if you require further assistance.
1 person found this helpful.
Was this helpful?
Thank you for voting!
David
January 3, 2020
Replaced range hood light and cleaned out the socket. Light still will not come on.
For model number WMH32519FS0
Hi David, we would recommend replacing the socket assuming everything else on the microwave works well. Thank you for your question and good luck with your repair!
Microwave is working intermittently. Asks that i open and close several times like it's missing a connection. The light goes on and off but does not stay on and does spin.
For model number WMH32519FS0
Hello Tanya,
Thank you for your question. Our sources suggest checking the door switched under parts PS10057151, part PS2361111, and part PS2361113 with a multi-meter as one or all of the switches are likely defective for your microwave which is causing the issues. We hope this helps.
What is the part number to replace interior light bulb and is there an installation video available?
Thank you.
For model number WMH32519FS0
Hi Bruce, thank you for the question. We have researched the model you have provided and have found that the Light Bulb you are looking for is part number PS2376034. Also, we have attached an installation video to help you out. We hope this is what you were looking for.
The nightmare was that this microwave is installed under the cabinet....in order to get to the light bulb I had to pull out my stove then squeeze into the space between the stove and counter....my old microwave light bult was much easier to change.....Shame on Whirlpool for making this so difficult.....must be a better way to cover the light bulb so that we do not need a screwdriver to remove the door to get to the light bulb
Ordered top & bottom micro-switches and mounting plate parts. Internet reviews could not find specifics if the issue was due to a top/bottom or combination of micro-switch or mounting plate failure. Pulled the plug. Removed the top vent assembly cover held in by 2 Phillips screws inside the vent. Removed the control panel held in by 1 Phillip screw at the top vent assembly area. Lifted control panel upward to release the catch and moved it off to the side - didn't disconnect any leads. Used a Torx bit to remove the door switch mounting plates at the front and pulled the plates through the opening from the control panel. Documented the wire color code connections, the top plate uses 2 micro's with one using both the closed & open contact. Installed the respective micros on the mounting plates and worked backwards with the wiring and removal steps. Once completed, the open/close sensing has worked every time.