The drain pump and motor assembly may also be known as the washer drain pump and is a part for your washer. The drain pump helps expel water from the washing machine. The drain pump is activated after...
This valve is used for cold water, bleach dispenser and prewash cycles. It has a standard hose fitting inlet with 2 outlets facing 45 degrees to the right and one outlet facing 45 degrees to the left.
This genuine OEM drum seal gasket prevents water from leaking between the outer tub and spin basket of your washer. It is made of black rubber and measures 2.5 inches in diameter. If your washer is le...
This part is the replacement connector hose or clean-out drain hose for your washer. It is black in color and is sold individually. The connector hose drains water out of the washer if the drain cycle...
This drain hose plug, also known as a hose cap, is a genuine OEM part for your washing machine. This plug caps the drain hose from the pump housing, and helps prevent leaks from your washer. Before be...
$10.25
In Stock
Questions And Answers for WM2010CW
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Shaun
June 26, 2022
How to change out a pump
For model number WM2010CW
Hello Shaun, thank you for your question. The Pump is PS3579318. We have a video for you to access. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Replaced drain pump on washer was different then the one sent to me went through rinse cycle stayed at 15 minutes would not drain water sound like motor what's humming
For model number WM2010CW
Hi Marvin, not sure what is causing this, you may wish to check the water inlet valve. Otherwise I would get a technician to take a look. Thank you for your question and good luck with your repair!
Getting an OE message on regular cycle.
However pump will work on rinse/spin setting and machine completes this setting
Could this be the control board?
thanks
For model number WM2010CW
Hello Michael, thank you for your inquiry. We have found that the OE error essentially means the water is not draining from the washing machine or residue being accumulated inside the filter. We would recommend checking the drain hose for any clogging. If this is not the case, you may need to check the pump filter, part number PS3522306, to fix the issue. We hope this sorts out your problem!
Do you know why my washing machine is noisy and rattling on the spin cycle and leaking a bit too?
For model number WM2010CW
Hello Dale, thank you for writing. The most likely cause is the gaskets and absorbers. The Gaskets are part PS3522854. If your washer is leaking, and running noisier than usual, check for wear on the gasket, and to ensure it is properly fitted. The Shock Absorbers are sold individually and are part PS3522311. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Was this helpful?
Thank you for voting!
Corey
December 5, 2022
Hello,
The door hinge on my washer has broken/snapped in half and I would like to replace it.
For model number WM2010CW
Hello Corey, thank you for reaching out. The door hinge compatible with your given model is part number PS3523448. If you require assistance to place an order, please contact customer service. We hope that helps!
Removed the top of the washer by removing the 4 back screws and 2 small brackets. Then I removed the front panel, this was actually the hardest part, 2 screws and 8 tabs that you pop out carefully from the top of the panel. I only disconnected the power button and was able to rest the panel on top of the washer. The rest of the washer came apart quickly just moving down the front of the washer and removing the door, latch, tub gasket, drain cover. Removing the pump was just a mater of disconnecting the drain hoses, and one clip under the drain assembly. 3 screws attach the drain to assembly to the pump and only 2 wires that are clearly marked. Reassembly is just going back through in reverse order of disassenbly. The best thing about this is that it all comes apart with a standard phillips screwdriver.
Thank you for the very helpful YouTube video. After watching the video, I was able to diagnose the problem, buy the part from your website, and complete the repair. This is my personal machine - I am not a professional repairman.
I received the locking device. I received an email from parts select with a repair video link. I watch the video and repeated the steps. Very easy and educational. Thank you for simplifying something I have limited experience doing.
