This dryer repair kit consists of five commonly replaced dryer parts: one multi-rib belt (part #661570V and measures 93 1/2 inches long), four drum support rollers, one idler assembly, nine tri-rings,...
This Idler Pulley includes the tri-ring and gasket and everything included here is manufacturer-certified. This part maintains correct tension on the drive belt in order to spin the drum properly. If ...
This drum support roller is sold individually. Most dryers require two. The tri-rings are included. This is a drum support roller for a dryer. It is a genuine replacement part. The part includes the d...
This dryer drum belt from Whirlpool/Kenmore has five ridges. It is used for many of Whirlpool's brands of clothes dryers. This flat belt is 1/4 of an inch wide.
This thermostat may differ in appearance, but functions the same as the original part. This part controls the temperature of the inside of the dryer drum and prevents the dryer from overheating.
This gas dryer ignition coil set comes with two ignition coils: one three-terminal boost/hold coil, and one two terminal secondary coil. Usually only one of them burns out but you should replace them ...
If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pul...
The idler pulley wheel is now sold with this arm. This idler pulley is for dryers.
Idler pulley maintains correct tension on the drive belt to spin the drum.
$34.16
In Stock
Questions And Answers for WGD8300SW2
Ask our experts a question about this model and we'll get back to you as soon as possible!
4 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Andre
June 25, 2022
f1 error code on wg08300sw2
For model number WGD8300SW2
Hello Andre, thank you for writing. To fix f1 error on my Whirlpool dryer, start by Resetting Your Dryer.
The first thing to do is to try to reset your dryer, as often this solves the problem. To reset your dryer, simply disconnect the dryer from its power source and leave it turned off for a few minutes. After a few minutes, turn your dryer back on and see if the error code has gone. We hope this helps.
Was this helpful?
Thank you for voting!
Victor
February 5, 2023
Whirlpool dryer when start appear code F01
For model number WGD8300SW2
Hello Victor, thank you for reaching out. The error code F01 indicates an issue with the Control Board, part number PS11748354. We recommend you first reset the dryer. For this, simply disconnect the dryer from its power source and leave it turned off for a few minutes. After a few minutes, turn your dryer back on and see if the error code has gone. If the problem does not resolve, we suggest you check the following internal components: Thermal Fuse, part number PS11741460, and Thermostat, part number PS11746740. We hope this helps!
I'm looking for a part, but I'm not sure what part to get. My Whirlpool drum is not spinning and when it does it's spinning slow what part I should replace .
For model number WGD8300SW2
Hello Stacey, thank you for your query. Based on our research, you may need to replace the dryer repair kit, part number PS373088, to fix the issue. This kit contains a multi rib dryer belt, 4 drum support rollers, 1 idler assembly, 9 tri rings, and 1 washer. This kit needs to be replaced due to normal wear and tear. We hope this sorts out your problem!
I have a Whirlpool model number wgd8300sw2 i believe it natural gas i need a propane orifice and instructions to how to make the conversion. Can you send me the proper orifice
For model number WGD8300SW2
Hello Ray, thank you for your question. We have researched the model you have provided, and we would suggest the Liquid Propane Conversion Kit, part number PS8691743. We have sent you a separate email with instructions. We hope this helps!
First I unplugged the dryer, then removed the back panel, this exposed most all of the wiring and I could see the heater coils. Not knowing what the problem was I started looking at the coils and could not see any broken parts. So then checked the thermal fuse for continuity I removed the two wires from it with a small pair of needle nose pliers, it was held in place by two screws, once they were removed the fuse came out easily, I checked continuity with a volt meter placing the meter on X1 Ohms and could not get a reading. I replaced with a new one and put it all back together the way I took it apart. Then I plugged it in and it worked first time, I now have warm dry clothes.
Cleaning the lint out of the whole machine took quite a bit of time--it was everywhere. Underneath the lint trap was a collection that ultimately ruined the thermal fuse where it restricted the air flow considerably.
Ascertaining the problem was the most time consuming part.
The actual repair was quite simple and didn't take but 15-20 minutes.
Received your parts, Popped them both right into place, Even though only one side needed to be replaced, I wanted them to match up. It was amazing how easy this was. My husband was quite impressed I had ordered these rather then look for either a new or used dryer from some other source.