This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This hose clamp extends from half an inch to an inch in diameter. It is made entirely of metal and is intended for use with Maytag brand washing machines.
This front load washer cleaner removes odor-causing residue. Use it once a month and it will keep your machine fresh and clean. Package comes with 3 tablets.
Ask our experts a question about this model and we'll get back to you as soon as possible!
7 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Rainer
December 26, 2022
I can't find a replacement door seal part
For model number WFW6620HC0
Hello Rainer, thank you for your inquiry. We have researched and found the part you are looking for is part number PS12711495. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!
It started by not draining and spinning on a regular cycle but if i chose the button drain and spin it worked perfectly. When the last load was finished and I tried to choose the drain and spin I got error codes F5 and E3 and the door locked.
For model number WFW6620HC0
Hi Mary, thank you for contacting us. The F3 E3 error code indicates that the door is not locking properly. We would recommend checking the following parts: the control board, part number PS12711819, and the door latch, part number PS12711558. We hope this solves your problem!
Hello John, thank you for reaching out. According to our research, your model is stackable. Glad to be of assistance!
Was this helpful?
Thank you for voting!
AUNDRA
March 8, 2022
What is the size of this model thank you
For model number WFW6620HC0
Hello Aundra, Thank you for your inquiry. We show that this model is 4.5 cubic feet. We hope this helps.
Was this helpful?
Thank you for voting!
John
May 26, 2022
This machine is three years old and has not been used very much. With a load in it, the machine stops and give an F7 E9 error. With nothing in it, the machine will run a full cycle, although it does make some strange staccato noises when starting to turn the drum. I have run through the load test and quick service cycles and it runs through those fine, although with the same noise. I have been told the motor and/or control board are bad, but it does not add up. The machine spins at full RPMs with nothing in it, but seems to overload and throw that error code when it has weight in the drum. Any ideas what my problem is? Thanks for any help.
For model number WFW6620HC0
Hi John,
Thank you for your question. If the F7 E9 error code is displayed, the main electronic control board has detected that the motor is not working. This may also be caused by an unbalanced load or you may have some clothing stuck between the basket and the tub. If the load is balanced and there is nothing stuck between the basket and the tub, then you will need to check both the motor and the electronic control board. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
Was this helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.
Everything worked perfectly---thanks to the suggestion of your call center agent. She suggested that since the replacement door handles were no longer available, I should consider repainting them--it worked like a charm. Please tell her she was a life saver. We rent that house in Fl and my returning tenants had complained about the discoloring refer handles. Thank you
Replaced the Whirlpool washer water inlet valve. 1. Unplug washer 2. Close Hot and Cold water valves 3. Remove top cover of the machine by taking out 3 screws in the top back. Slide top back and remove. 4. Water Inlet Valve is located on the back left side, remove tubing using a nutdriver to loosen the hose clamps. 5. Water Inlet Valve is removed by removing the screw in the back of the valve and turning the valve clockwise a little. Replace with the new one, connect hoses, put cover back on, open valves, plug it in. 6. Ran washer and Fabric Softener dispenser now works
