This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$10.20
In Stock
Order within the next 4 hrs and your part ships today!
This temperature sensor detects the temperature within the oven cavity. This oven temperature sensor, for ranges, works together with the oven control board to measure and regulate the oven temperatur...
$120.73
In Stock
Order within the next 4 hrs and your part ships today!
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
$26.51
In Stock
Order within the next 4 hrs and your part ships today!
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Glenna
August 31, 2023
Need a whit knob for cookstove
For model number WFG320M0BW0
Hello Glenna, thank you for reaching out. The compatible white knob for your model is part number PS11753189. We hope this is helpful!
Spilled water on top of stove now gas back burner clicks but wont light
For model number WFG320M0BW0
Hello Steve, Thank you for writing. This is normally an indication the Surface Ignitor got wet and shorted out and needs to be replaced. We hope this solves your problem!
Hello,
The exterior glass door is not fixed to the metal door. When oven door is open, the exterior galls door is loose and held on only by the handle.
Thanks
For model number WFG320M0BW0
Hi Allan, thank you for the question. Based on the description that you have provided, we would recommend replacing the exterior glass door, part number PS11756071, to fix the issue. The clips on the top of the glass might have broken due to which the glass is loose. Good luck with this repair!
The glass oven door is separating. It seems to be held on by the 2 clips on top- which are intact- and some dried out double sided tape at bottom. There is no support or frame holding it on by any other method. Is there an adhesive that can be used to replace the dried out tape?
For model number WFG320M0BW0
Hello Cindy, thank you for contacting us. According to our research, the glass bracket, part number PS12070929, holds the inner door glass in place inside the oven door. You may need to replace it to fix the issue. There is no special adhesive or hardware for just the glass. We hope this helps!
Hello Pamela, thank you for your question. We have researched your model and found that the issue is probably with the Oven Igniter, part number PS11770066. If that does not take care of the issue, then the problem is most likely to be related to the Oven Gas Valve, part number PS11747502. If you require assistance to place an order, please contact customer service. We hope that helps!
My husband pulled out the stove turned the gas off then he pulled out the part and replaced igniter....it took only about 20 min to do this job it was very easy and prior to us doing ourselves i called a well known company that does home repairs, I also called a few smaller businesses and to replace this part was anywhere from $175- 250 if not more. we are very very happy with our decision to replace the part ourselves unstead of spending extra money we didnt have .
Opened up the back of the stove. Unpluged the sensor. Replaced the sensor. Replace the back of the stove.
The sensor that has been replaced is not what is expected. After reading all of the instructions for adjusting the temperatures, the only temp that stays steady is when we first turn on the oven to 350 degrees. That stays steady but when I turn it to 400 it slowly goes up to 425 degrees.
I numbered every part. ex: 1 L., for first part removed left side. I used a magic marker to circle the holes and wrote the number of screws used on the part, set the srews in a separete place, so that I new where these screws went to. The cleanup was pretty time consuming, but I was able to keep my stove, when every repairman I called to fix my stove told me I was better off buying a new stove. ($600.00 stove 2 years old)Please Note: The insulation blanket needed for the entire stove is two pieces, the sides and top are one part # and the bottom and back, are another part #. I did not know this. I just purchased the top and sides. I got lucky, the back and bottom were still in good shape. So I guess I should have read the description of the part more carefully to see what it covers, before I ordered it. It took two people two hours to do the work, it was really nice to have an extra set of eyes, to remember what direction pieces of metal from the stove went. I would do it all over in a heart beat instead of buying a new stove.
