This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$10.20
In Stock
Order within the next 11 hrs and your part ships today!
This temperature sensor detects the temperature within the oven cavity. This oven temperature sensor, for ranges, works together with the oven control board to measure and regulate the oven temperatur...
$120.73
In Stock
Order within the next 11 hrs and your part ships today!
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
$26.51
In Stock
Order within the next 11 hrs and your part ships today!
Ask our experts a question about this model and we'll get back to you as soon as possible!
10 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Becky
September 24, 2021
Need black burner caps for my gas stove
For model number WFG320M0BB0
Hello Becky, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part #: PS11749752 for the Left and Right Front Caps, Part #: PS11749753 for the Left Rear and Center Caps and Part #: PS11749754 for the Right Rear Cap. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Is this oven door fully complete with everything I need to install myself?
For model number WFG320M0BB0
Hi Clarence, Thank you for the question. The Oven Door is not sold as a complete assembly. The door is only sold in parts. We hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Brian
December 15, 2023
The ignition on the stove top in not sparking consistently or equally. It randomly sparks at different burners when turned on.
For model number WFG320M0BB0
Hi Brian, thank you for contacting us. Based on the description that you have provided, we would recommend checking the spark module, part number PS16730768, as it is most likely faulty. Please contact us anytime if you require further assistance!
If I purchase a outer oven glass, what else is needed besides the glass to complete the replace?
For model number WFG320M0BB0
Hi Clarence, Thank you for the question. The side trims, screws and brackets can be reused from the glass that was on the door. We hope this helps!
Was this helpful?
Thank you for voting!
Pamela
May 28, 2023
Oven starts to heat then f2 starts flashing
For model number WFG320M0BB0
Hi Pamela, thank you for getting in touch. The F2 error code indicates that the oven temperature is too high. This error can be caused by a faulty temperature sensor, the electronic control board, or the associated wiring. To fix this issue, you may need to check the temperature sensor, part number PS11749737, and the electronic control board, part number PS11756247. If any one of these is faulty, you may need to replace it. We hope this solves your issue!
My husband pulled out the stove turned the gas off then he pulled out the part and replaced igniter....it took only about 20 min to do this job it was very easy and prior to us doing ourselves i called a well known company that does home repairs, I also called a few smaller businesses and to replace this part was anywhere from $175- 250 if not more. we are very very happy with our decision to replace the part ourselves unstead of spending extra money we didnt have .
Opened up the back of the stove. Unpluged the sensor. Replaced the sensor. Replace the back of the stove.
The sensor that has been replaced is not what is expected. After reading all of the instructions for adjusting the temperatures, the only temp that stays steady is when we first turn on the oven to 350 degrees. That stays steady but when I turn it to 400 it slowly goes up to 425 degrees.
I numbered every part. ex: 1 L., for first part removed left side. I used a magic marker to circle the holes and wrote the number of screws used on the part, set the srews in a separete place, so that I new where these screws went to. The cleanup was pretty time consuming, but I was able to keep my stove, when every repairman I called to fix my stove told me I was better off buying a new stove. ($600.00 stove 2 years old)Please Note: The insulation blanket needed for the entire stove is two pieces, the sides and top are one part # and the bottom and back, are another part #. I did not know this. I just purchased the top and sides. I got lucky, the back and bottom were still in good shape. So I guess I should have read the description of the part more carefully to see what it covers, before I ordered it. It took two people two hours to do the work, it was really nice to have an extra set of eyes, to remember what direction pieces of metal from the stove went. I would do it all over in a heart beat instead of buying a new stove.