WFE540H0AS1 Whirlpool Range - Overview

Hello and thank you for writing. It certainly sounds like it could be faulty infinite switches PS11740785 and PS11754687you should check the part(s) for signs of damage or test with a multimeter, and replace the part(s) as needed. We hope this helps. Please contact us anytime if you require further assistance.

Hi Billy, Thank you for your question. If your bake element is cycling on and off rapidly, the issue may be with the temperature sensor. The sensor monitors the temperature in the oven and cycles the elements on and off so the oven can reach its desired temperature. To verify if it is causing the issue, you will need to test it with a multimeter. From our website, "Unplug your oven before starting this test. The temperature sensor is frequently found inside the oven, attached to the rear wall near the top. Once you have located it, remove it from the oven. In order to test it, you will need to reference your owner’s manual to determine what the reading for a properly functioning temperature sensor should be for your model, as this varies from model to model. To test for continuity, use a multimeter on the Rx1 setting and touch the terminals with the probes. This test needs to be done with the sensor at room temperature to produce accurate results. If your test results do not meet the manufacturer’s guidelines, you need a replacement temperature sensor." If the sensor is fine, you will need to check the bake element, the electronic control board and the wiring between the parts to see which one is causing the issue. We hope this helps! Good luck with the repair!

Hello Renee, thank you for contacting us. Based on our research, we would recommend checking the electronic control board with overlay, part number PS11756562. We also recommend checking whether the wire harness is connected properly or not. We hope this solves your problem!

Hi Raul, thank you for the question. The error code F2E0 means that your touch control panel is shorted. To solve this issue, you may need to check the control board, part number PS11756564, as it is most likely faulty and may need to be replaced. We hope this is helpful!