This control switch controls the stove top 8" surface burner. 8.9- 11.0 amp. This surface burner element switch is for an 8-inch surface burner on an oven, stove, or range. The element switch control...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This temperature sensor detects the temperature within the oven cavity. This oven temperature sensor, for ranges, works together with the oven control board to measure and regulate the oven temperatur...
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
The light socket on your electric range connects the power source to the light bulb. If your oven light is malfunctioning, you may need to replace the light socket. The light socket is located in the ...
Ask our experts a question about this model and we'll get back to you as soon as possible!
7 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Daniel
11 days ago
F1E0 error code comes up when trying to use the oven. Is the control module the only possible issue to correct the error?
For model number WFE320M0JS0
Hello Daniel, thank you for reaching out. According to our research, the error code F1E0 indicates a communication error between control panel wiring and the main control board. We would recommend checking the wiring first. If it is fine, then the issue is most probably with the oven control board, part number PS16730875. You may need to replace it to fix the issue. We hope this helps!
My oven will not keep a constant heat level. It is under warranty. Please help
For model number WFE320M0JS0
Hello Kathy, Thank you for contacting PartSelect.com. For Warranty issues we suggest contacting Whirlpool. We hope this helps!
Was this helpful?
Thank you for voting!
Evelyn
November 10, 2022
I need replacment 9 inch burner for my Whirlpool glass top range
For model number WFE320M0JS0
Hello Evelyn, thank you for reaching out. The part number for the 9-inch surface element is PS11775308. If you need help placing an order for it, please feel free to give us a call. We look forward to hearing from you!
Hello Peggy, Thank you for writing. The Hot Surface Light is controlled by the switch that controls the element. The switch that was in use at the time the issue started may need to be replaced. We hope this solves your problem!
The oven was working fine & F1 popped up. We shut the oven off & put it back on & F1 popped up again & we shut it off.
For model number WFE320M0JS0
Hi Tawny, thank you for the question. Based on our research, error code F1 indicates that the control board is faulty. We recommend replacing the control board, part number PS16730875, to solve the problem. It monitors the temperature and controls the oven heat. We hope this solves your problem!
Opened up the back of the stove. Unpluged the sensor. Replaced the sensor. Replace the back of the stove.
The sensor that has been replaced is not what is expected. After reading all of the instructions for adjusting the temperatures, the only temp that stays steady is when we first turn on the oven to 350 degrees. That stays steady but when I turn it to 400 it slowly goes up to 425 degrees.
I numbered every part. ex: 1 L., for first part removed left side. I used a magic marker to circle the holes and wrote the number of screws used on the part, set the srews in a separete place, so that I new where these screws went to. The cleanup was pretty time consuming, but I was able to keep my stove, when every repairman I called to fix my stove told me I was better off buying a new stove. ($600.00 stove 2 years old)Please Note: The insulation blanket needed for the entire stove is two pieces, the sides and top are one part # and the bottom and back, are another part #. I did not know this. I just purchased the top and sides. I got lucky, the back and bottom were still in good shape. So I guess I should have read the description of the part more carefully to see what it covers, before I ordered it. It took two people two hours to do the work, it was really nice to have an extra set of eyes, to remember what direction pieces of metal from the stove went. I would do it all over in a heart beat instead of buying a new stove.
removed the screws holding the back metal panel, this exposed the wires to the switch. tested the wires to find that they were live when the switch was in the off position. ordered a new switch. UNPLUGED THE STOVE. removed the knob on the front of the stove. this exposed 2 screws, removed screws and the switch came away from the stove. removed each wire from the old switch and replaced them in the same position on the new switch. inserted new switch into the stove and attached the 2 screws. replaced back panel and pluged in stove. all tested well