This an authentic OEM 40-Watt replacement light bulb, used in a number of household appliances. It is specially designed to withstand extreme temperatures, which is why these replacement bulbs are mos...
This control switch controls the stove top 8" surface burner. 8.9- 11.0 amp. This surface burner element switch is for an 8-inch surface burner on an oven, stove, or range. The element switch control...
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
This temperature sensor detects the temperature within the oven cavity. This oven temperature sensor, for ranges, works together with the oven control board to measure and regulate the oven temperatur...
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
The light socket on your electric range connects the power source to the light bulb. If your oven light is malfunctioning, you may need to replace the light socket. The light socket is located in the ...
This switch controls the stove top 6" surface burner.
$73.96
In Stock
Questions And Answers for WFE320M0EW0
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Shemuel
June 15, 2021
What does p5h, or psh code refer to? The owners manual is no longer available on line. The oven does not work on bake or broil at all. The elements do not appear damaged at all. The four top burners work fine. Even after I have pulled then reconnected the plug, or switched the circuit breakers off, then on, the above codes flash on. Please help. Can the manual be down loaded?
For model number WFE320M0EW0
Hello Shemuel, Thank you for the question. The PSH Error code is a PUSH error code and they recommended first resetting the appliance as you have already done. Since that did not fix the issue we suggest having the Control Board replaced. We hope this helps, good luck with this repair!
cooktop on light does not go out but hot surface indicator light is off and cooktop is cold.
For model number WFE320M0EW0
Hi Bruce, thank you for the great question. This issue means that one of the light contacts on one of your burner control switches has failed. Now probably the easiest way to figure out which burner control switch needs to be replaced is to pull the oven out and disconnect the power cord. Remove the screws coming in from the back of the control panel and remove the back control access panel. Once this panel is removed, you can see the back of all 4 burner switches. Disconnect all the wires going to one of the switches and plug the range back in. If the light it off, that is the switch you need to replace. If the light stays on, then unplug the oven, reconnect all the wires, and try the next switch. The left front infinite switch for your model is part number PS11754687. The right front infinite switch for your model is part number PS11740783. The infinite switch for the left rear and rear right burner is part number PS11740785. Good luck with this repair!
first I pulled the stove from the wall. Then unplugged the stove from the wall (electric stove) for safety. then I removed the middle back panel screws(2) and then the panel. I then pulled the wires off the heating element that was bad. I took the screws (2) off the heating element inside the oven. I had to use WD-40 to loosen the screws because with the heat they were really stuck. I removed the heating element and replaced it with the one I got through partselect.com. Put everything back and walla finished. Partselect.com sent me the right part at the right price and fast. No hassles at all.
Opened up the back of the stove. Unpluged the sensor. Replaced the sensor. Replace the back of the stove.
The sensor that has been replaced is not what is expected. After reading all of the instructions for adjusting the temperatures, the only temp that stays steady is when we first turn on the oven to 350 degrees. That stays steady but when I turn it to 400 it slowly goes up to 425 degrees.
I numbered every part. ex: 1 L., for first part removed left side. I used a magic marker to circle the holes and wrote the number of screws used on the part, set the srews in a separete place, so that I new where these screws went to. The cleanup was pretty time consuming, but I was able to keep my stove, when every repairman I called to fix my stove told me I was better off buying a new stove. ($600.00 stove 2 years old)Please Note: The insulation blanket needed for the entire stove is two pieces, the sides and top are one part # and the bottom and back, are another part #. I did not know this. I just purchased the top and sides. I got lucky, the back and bottom were still in good shape. So I guess I should have read the description of the part more carefully to see what it covers, before I ordered it. It took two people two hours to do the work, it was really nice to have an extra set of eyes, to remember what direction pieces of metal from the stove went. I would do it all over in a heart beat instead of buying a new stove.
