Models > WFC150M0EW3

WFC150M0EW3 Whirlpool Range - Overview

Sections of the WFC150M0EW3

[Viewing 6 of 6]
Keep searches simple, eg. "belt" or "pump".
Touch-Up Paint - White – Part Number: 72017
Touch-Up Paint - White
★★★★★
★★★★★
(16)
PartSelect #: PS385132
Manufacturer #: 72017
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, an...
$10.20
  In Stock
Oven Sensor – Part Number: WPW10181986
Oven Sensor
★★★★★
★★★★★
(32)
PartSelect #: PS11749737
Manufacturer #: WPW10181986
This temperature sensor detects the temperature within the oven cavity. This oven temperature sensor, for ranges, works together with the oven control board to measure and regulate the oven temperatur...
$120.73
  In Stock
Drip Bowl - 6 Inch – Part Number: W10196406RW
Drip Bowl - 6 Inch
★★★★★
★★★★★
(5)
PartSelect #: PS2366565
Manufacturer #: W10196406RW
This part has been substituted by the manufacturer and has a hole in the center. It no longer has a solid bottom.
$12.88
  In Stock
Drip Bowl - 8 Inch – Part Number: W10196405RW
Drip Bowl - 8 Inch
★★★★★
★★★★★
(1)
PartSelect #: PS2366563
Manufacturer #: W10196405RW
This part is located beneath the element and catches any spills.
$13.87
  In Stock
Safety Thermostat – Part Number: WP3196548
Safety Thermostat
★★★★★
★★★★★
(9)
PartSelect #: PS11740991
Manufacturer #: WP3196548
This part is used as a safety feature. If your range overheats this part will shut the range down.
$51.36
  In Stock
Screw – Part Number: W11233072
Screw
★★★★★
★★★★★
(5)
PartSelect #: PS12349731
Manufacturer #: W11233072
This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch...
$26.51
  In Stock
SOCKT-LITE – Part Number: W11594027
SOCKT-LITE
★★★★★
★★★★★
(7)
PartSelect #: PS16730838
Manufacturer #: W11594027
The light socket on your electric range connects the power source to the light bulb. If your oven light is malfunctioning, you may need to replace the light socket. The light socket is located in the ...
$76.05
  In Stock
Insulation – Part Number: WPW10208653
Insulation
★★★★★
★★★★★
(6)
PartSelect #: PS11750415
Manufacturer #: WPW10208653
Oven Wrap Insulation.
$77.41
  In Stock
Infinite Control Switch, 6" – Part Number: WP3149404
Infinite Control Switch, 6"
★★★★★
★★★★★
(5)
PartSelect #: PS11740785
Manufacturer #: WP3149404
This switch controls the stove top 6" surface burner.
$73.96
  In Stock
Infinite Switch - 8 Inch – Part Number: WP3148953
Infinite Switch - 8 Inch
★★★★★
★★★★★
(7)
PartSelect #: PS11740775
Manufacturer #: WP3148953
This switch controls the stovetop surface burner. This surface element control switch is for ranges. Surface element control switch turns the surface element on and off and controls how much hea...
$85.23
  In Stock
Rear Leveling Leg – Part Number: WPW10058460
Rear Leveling Leg
★★★★★
★★★★★
(2)
PartSelect #: PS11748094
Manufacturer #: WPW10058460
Sold individually.
$14.10
  In Stock
Side Trim - Right Hand Side – Part Number: WP8523166
Side Trim - Right Hand Side
PartSelect #: PS11746045
Manufacturer #: WP8523166
This trim is white in color.
$103.09
  In Stock

Questions And Answers for WFC150M0EW3

Ask our experts a question about this model and we'll get back to you as soon as possible!

4 questions answered by our experts.
  • 1
Sort by:
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Randy
May 25, 2023
All 4pf the burner as well as the oven will not heat up. The red cooktop light does come on and I have checked both the cord and fuse and both are OK
For model number WFC150M0EW3
PartSelect logo
Hi Randy, thank you for reaching out. Based on the description that you have provided, we would recommend checking the terminal block, part number PS11750972, to fix this issue. We hope this solves your issue!

Was this helpful?
Thank you for voting!
Related Parts:
Blair
November 28, 2023
Neither the broiler element or the baking (oven) element get hot. They become warm to the touch but not too hot to hold. Could it be the temperature sensor? The range is working fine.
For model number WFC150M0EW3
PartSelect logo
Hello Blair, thank you for the question. Based on the description that you have provided, we would recommend checking the temperature sensor, part number PS11749737, to solve the problem. Glad to be of assistance!

Was this helpful?
Thank you for voting!
Related Parts:
Blair
December 6, 2023
I have little or no heat in either the baking or broiler modes. Elements are slightly warm to the touch but not too warm to hold. I checked the temperature sensor as you instructed - 1084 ohms so it doesn’t appear to be the problem? Next on your list of potential culprits is the safety thermostat. Can I check it with a multimeter?
For model number WFC150M0EW3
PartSelect logo
Hello Blair, thank you for contacting us. Based on our understanding of the issue, we would suggest checking the control board, part number PS12114372, to solve the problem. We hope this helps!

Was this helpful?
Thank you for voting!
Related Parts:
Byron
January 14, 2024
The Bake element is warm to touch when set to bake. The broiler element seems to work fine. I have unplugged the stove and plugged back in, and the bake element will get hot and work like it's supposed to and then when we use again the bake element is warm to touch and not working correctly again. I am stumped and wondering if you could give me a little advice if it's in the temp probe or if I have control board issue. Thank you
For model number WFC150M0EW3
PartSelect logo
Hi Byron, thank you for reaching out. Based on the description you have provided, the issue could be with the bake element, part number PS12348633. You may need to replace it to fix the issue. We hope this solves your problem!

Was this helpful?
Thank you for voting!
Related Parts:
  • 1

Common Symptoms of the WFC150M0EW3

[Viewing 8 of 8]
Little to no heat when baking
Fixed by
these parts
Fixing Fixing Fixing
Show All
Element will not heat
Fixed by
these parts
Fixing Fixing Fixing
Show All
Oven is too hot
Fixed by
these parts
Fixing Fixing
Show All
Oven not heating evenly
Fixed by
these parts
Fixing Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing Fixing Fixing
Show All
Door won’t close
Fixed by
these parts
Fixing Fixing Fixing
Show All
Little to no heat when broiling
Fixed by
these parts
Fixing Fixing Fixing
Show All
Touchpad does not respond
Fixed by
these parts
Fixing
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Drip bowls were rusty and rotting through
I simply removed the elements and replaced the drip bowls with new ones. Put the elements back in and my stove looks %1000 better!
Parts Used:
Drip Bowl - 6 Inch Drip Bowl - 8 Inch
  • Michael from Kings Park, NY
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
488 of 497 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Just Replaced Ole Drip Bowls.
Unplugged burners. . . . . Removed old bowls and replaced with new. . . . . . Plugged burners back in. However, I do want you to know that I could not believe the promptness of your service and the courteous customer service person that assisted me with my problem in selecting the correct drip bowls. You are definitely a unique company!!!!
Parts Used:
Drip Bowl - 8 Inch Drip Bowl - 6 Inch
  • Roger from Osage Beach, MO
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
378 of 386 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
temperature not accurate after 3 1/2 years of happy usage
Opened up the back of the stove. Unpluged the sensor. Replaced the sensor. Replace the back of the stove.

The sensor that has been replaced is not what is expected. After reading all of the instructions for adjusting the temperatures, the only temp that stays steady is when we first turn on the oven to 350 degrees. That stays steady but when I turn it to 400 it slowly goes up to 425 degrees.
Parts Used:
Oven Sensor
  • Ruth from Oregon, IL
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    15 - 30 mins
  • Tools:
    Screw drivers
137 of 245 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!