This dryer repair kit consists of five commonly replaced dryer parts: one multi-rib belt (part #661570V and measures 93 1/2 inches long), four drum support rollers, one idler assembly, nine tri-rings,...
$68.33
In Stock
Order within the next 6 hrs and your part ships today!
This Idler Pulley includes the tri-ring and gasket and everything included here is manufacturer-certified. This part maintains correct tension on the drive belt in order to spin the drum properly. If ...
$34.36
In Stock
Order within the next 6 hrs and your part ships today!
This drum support roller is sold individually. Most dryers require two. The tri-rings are included. This is a drum support roller for a dryer. It is a genuine replacement part. The part includes the d...
$28.93
In Stock
Order within the next 6 hrs and your part ships today!
The Drive Belt is a 93 1/2" belt which wraps around the dryer drum to allow tension and movement. If broken the dryer will not turn properly, or there may be loud noises. The part is rated as "medium"...
$27.99
In Stock
Order within the next 6 hrs and your part ships today!
This thermostat may differ in appearance, but functions the same as the original part. This part controls the temperature of the inside of the dryer drum and prevents the dryer from overheating.
$60.87
In Stock
Order within the next 6 hrs and your part ships today!
If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pul...
$17.11
In Stock
Order within the next 6 hrs and your part ships today!
Also known as Thermal Cut-Off kit. The thermostat acts as a safety mechanism that keeps the dryer from overheating and the fuse is like a backup system - it's set to trip at a higher temperature than...
$67.94
In Stock
Order within the next 6 hrs and your part ships today!
This is the moisture sensor for your dryer. It helps detect the amount of moisture in your clothes during the dryer cycle. If you notice your clothes are still wet after an automatic dryer cycle is do...
$13.67
In Stock
Order within the next 6 hrs and your part ships today!
Questions And Answers for WED8300SW0
Ask our experts a question about this model and we'll get back to you as soon as possible!
7 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Roger Hunt
March 26, 2020
Will not come on. Sensing light, light come on
For model number WED8300SW0
Hello Roger, thank you for writing. Here is a link to what parts to check and how to check them when this issue occurs. Here is the link: https://www.partselect.com/Repair/Dryer/Will-Not-Start/ . I hope this helps.
2 people found this helpful.
Was this helpful?
Thank you for voting!
Chrystine
January 9, 2020
Hello, My Whirlpool duet sport washer gives error code 5d during the rinse cycle and will not continue. It also will leak water out of the front.
For model number WED8300SW0
Hello Chrystine, Thank you for the question. I think the code is a SD. This could be caused by using too much detergent or not using High Efficiency (HE) detergent. The washer will not be able to spin out water with the excess suds. When "Sud" or "Sd" is displayed, the washer automatically extends the rinse time to remove the excess suds. If it still will not run, you may need to remove the hoses and pump to clean them from any suds build up. we hope this helps!
1 person found this helpful.
Was this helpful?
Thank you for voting!
Mary
February 2, 2020
Whirlpool duet front load washer will not spin fast
For model number WED8300SW0
Hello Mary, thank you for writing. If there is an issue with the unit spinning, you may have a defective Belt. We advise checking that part in your model for any damage. I hope this helps.
1 person found this helpful.
Was this helpful?
Thank you for voting!
Billy
November 29, 2022
I need a new dryer top and your parts list has two listed. I believe One is no longer available,I think part # PS1175311 which is still available,is the one I need. could you referance the serial number to check? ser. # MU1550866.Thank You.
For model number WED8300SW0
Hello Billy, thank you for reaching out. The dryer top compatible with your given model is part number PS11753111. If you require assistance to place an order, please contact customer service. We hope that helps!
First I unplugged the dryer, then removed the back panel, this exposed most all of the wiring and I could see the heater coils. Not knowing what the problem was I started looking at the coils and could not see any broken parts. So then checked the thermal fuse for continuity I removed the two wires from it with a small pair of needle nose pliers, it was held in place by two screws, once they were removed the fuse came out easily, I checked continuity with a volt meter placing the meter on X1 Ohms and could not get a reading. I replaced with a new one and put it all back together the way I took it apart. Then I plugged it in and it worked first time, I now have warm dry clothes.
Cleaning the lint out of the whole machine took quite a bit of time--it was everywhere. Underneath the lint trap was a collection that ultimately ruined the thermal fuse where it restricted the air flow considerably.
Ascertaining the problem was the most time consuming part.
The actual repair was quite simple and didn't take but 15-20 minutes.
Received your parts, Popped them both right into place, Even though only one side needed to be replaced, I wanted them to match up. It was amazing how easy this was. My husband was quite impressed I had ordered these rather then look for either a new or used dryer from some other source.