This dryer repair kit consists of five commonly replaced dryer parts: one multi-rib belt (part #661570V and measures 93 1/2 inches long), four drum support rollers, one idler assembly, nine tri-rings,...
$68.33
In Stock
Order within the next 11 hrs and your part ships today!
This Idler Pulley includes the tri-ring and gasket and everything included here is manufacturer-certified. This part maintains correct tension on the drive belt in order to spin the drum properly. If ...
$34.36
In Stock
Order within the next 11 hrs and your part ships today!
When connected to electricity the dryer heating element glows red hot and generates heat. When air is blown over it, it heats the air which is used to dry the clothes. The heating element fits inside ...
$120.68
In Stock
Order within the next 11 hrs and your part ships today!
This drum support roller is sold individually. Most dryers require two. The tri-rings are included. This is a drum support roller for a dryer. It is a genuine replacement part. The part includes the d...
$28.93
In Stock
Order within the next 11 hrs and your part ships today!
This dryer drum belt from Whirlpool/Kenmore has five ridges. It is used for many of Whirlpool's brands of clothes dryers. This flat belt is 1/4 of an inch wide.
$27.99
In Stock
Order within the next 11 hrs and your part ships today!
This thermostat may differ in appearance, but functions the same as the original part. This part controls the temperature of the inside of the dryer drum and prevents the dryer from overheating.
$60.87
In Stock
Order within the next 11 hrs and your part ships today!
If you notice that your dryer is noisy or will not tumble, you may need to replace the tri ring. This part is triangular, and is less than an inch in size. Tri rings can be found both on the idler pul...
$17.11
In Stock
Order within the next 11 hrs and your part ships today!
Questions And Answers for WED5800BW0
Ask our experts a question about this model and we'll get back to you as soon as possible!
5 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Tami
April 9, 2022
I have a Whirlpool Cabrio dryer that won’t start. When you press the start button, it acts like it’s going to start, but when you press it again, it just clicks and goes into pause mode. I did a diagnostic test on it and the error code read f3e6. Moisture sensor open. Would this prevent the dryer from starting?
For model number WED5800BW0
Hello Tami, thank yo for writing. Yes, a faulty or defective Moisture Sensor part PS11741408 may cause the dryer from Starting. If you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you.
Hello Randy, thank you for your inquiry. To remove the lower access panel, use a flathead screwdriver to release the spring clips on top. After releasing the clips, simply remove the panel. Glad to be of assistance!
1 person found this helpful.
Was this helpful?
Thank you for voting!
SCOTT
March 18, 2020
How do i remove the front cover to take out the drum
For model number WED5800BW0
Hello, Thank you for your question. You will first need to remove the screws from the door frame, and then around the unit. Once those are removed you will need to carefully pull off the door and disconnect the springs in the bottom corner, That will release that panel. We hope this helps.
Was this helpful?
Thank you for voting!
Peter
May 24, 2022
Looking for heating element and sensors
For model number WED5800BW0
Hello Peter, Thank you for your inquiry. We have researched the model number that you have provided and show the heating element as part# PS11741416, the moisture sensor as part# PS1174140, the cycling thermostat as part# PS11746740, the high limit thermostat as part# PS11741456 and the thermal cut off kit as part# PS334387. We hope this helps and if you need help placing an order, customer service is open 7 days a week. Please feel free to give us a call. We look forward to hearing from you!
Dryer lights will turn on but only makes a clicking sounds. I’ve reset and done diagnostics . Code! shows 88 briefly and then F3E6. How would I fix this?
For model number WED5800BW0
Hi Jerrie, thank you for contacting us. F3 E6 is a moisture sensor fault. It could be that the sensor has loose or damaged wiring or has short-circuited, but either way, it is faulty. The first place to check is the sensor connections. If connections are fine, you will need to replace the moisture sensor, PS11741408. We hope this sorts out your problem!
First I unplugged the dryer, then removed the back panel, this exposed most all of the wiring and I could see the heater coils. Not knowing what the problem was I started looking at the coils and could not see any broken parts. So then checked the thermal fuse for continuity I removed the two wires from it with a small pair of needle nose pliers, it was held in place by two screws, once they were removed the fuse came out easily, I checked continuity with a volt meter placing the meter on X1 Ohms and could not get a reading. I replaced with a new one and put it all back together the way I took it apart. Then I plugged it in and it worked first time, I now have warm dry clothes.
Cleaning the lint out of the whole machine took quite a bit of time--it was everywhere. Underneath the lint trap was a collection that ultimately ruined the thermal fuse where it restricted the air flow considerably.
Ascertaining the problem was the most time consuming part.
The actual repair was quite simple and didn't take but 15-20 minutes.
