The rack track stop on your dishwasher is designed to stop the dish rack at the appropriate place when opening and closing the rack. If your dishwasher is not cleaning your dishes properly, the rack s...
Sold individually. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking, or tilting forward.
This manufacturer-certified heating element is used to create heat during the dry cycle and increase water temperature during portions of the wash cycle when certain options are selected. If your dish...
This is a lower spray arm for a dishwasher. The lower spray arm allows water to be spread evenly throughout the dishwasher tub with the proper force so dishes come out clean. This spray arm is gray in...
This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.
This is a replacement middle spray arm in your dishwasher. You will find your middle spray arm mounted on the bottom of the middle dish rack. The upper spray arm rotates and sprays water during the op...
Also know as a diverter valve. This diverter motor is for dishwashers.
Diverter motor controls the flow of water to the spray arms.
Unplug the dishwasher and shut off the water supply before i...
This filter works with the water pump in your dishwasher. It prevents debris from entering the pump and causing damage. As a result, the filter can occasionally become clogged or damaged, and will nee...
This part is used to hold the access panel in place. Sold individually.
$34.10
In Stock
Questions And Answers for WDT710PAHZ1
Ask our experts a question about this model and we'll get back to you as soon as possible!
7 questions answered by our experts.
< Prev
1
2
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kathy
November 18, 2021
Dishwasher is about 2 year old. Fills up but will not wash ….
For model number WDT710PAHZ1
Hi Kathy,
Thank you for your question. If your dishwasher fills with water but will not wash, you may have a malfunctioning dishwasher pump motor. This motor circulates the water through the dishwasher during the wash cycle. If the motor is malfunctioning, you should hear clicks coming from it. You will need to remove the dishwasher from under the cabinet, so you can check the motor for continuity with a multimeter. The Ohms reading for the dishwasher pump motor should be between 200-400 Ohms. The part number listed under your model number for the dishwasher pump motor is PS12070585. If you would like to place an order for it, you may order it either online or by calling our customer service line and anyone will be happy to assist you. We hope this helps! If you have any questions, please let us know.
Hello Bryan, thank you for contacting us. We would recommend checking the water inlet valve, part number PS8760080. It is the water supplier of the dishwasher. Also, inspect the inlet hose and make sure it is not blocked, and that the water inlet, part number PS11750066, is clear. The water inlet directs water from the inlet tubing to the dishwasher tub. Please reach out to customer service if you need help placing an order. Glad to be of help!
Hi Ramon, thank you for the question. F2E2 is a bad interface control board on this model. The top display touch panel is not communicating with the main board inside the door. Much like a computer, resetting the dishwasher control can sometimes solve the issues you are experiencing. To reset the dishwasher control panel, it needs to be disconnected from the power source for one minute. If your dishwasher is plugged into an outlet, simply unplug the unit for one minute and then plug the unit back in. If the dishwasher is hard wired to the power supply, turn the breaker off at the home electrical panel that powers the dishwasher for one minute and then turn the breaker back on. If the error persists. You can flip the breaker off and open the door to start. Remove the screws around the border of the inner door liner going down. Find the wire plug going from the interface control to the main board and unplug it at the main board. If the connection looks corroded, clean it with a toothbrush. Try the dishwasher again and if it still acts up, you will need to order and replace the interface control board, PS12731287. If this does not help you will need to replace the control board, part number PS12704698. Please reach out to customer service if you need help placing an order. Glad to be of help!
Dishwasher fills but no water pumped through the system. I checked pump motor and the Ohms reading was 8.5 Ohms. This leads me to believe the pump motor is faulty but the part number you have for my washer is different than what is installed. The tag on the motor is below: Askoll Mod. M309 20min ON/10min OFF Cod. W10805387 120 Vac 60Hz 0.9A 40W Ci. 155 RM 010103 240218
For model number WDT710PAHZ1
Hello Mark, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is PartSelect Number PS12070585 for the Circulation Pump. We hope this helps, good luck with this repair!
Hi Jenn, thank you for getting in touch. The compatible water inlet valve for your model is part number PS8760080. Let us know if you have further questions!
I called an experienced plumber, who balanced and installed my new dishwasher properly, using the brackets I ordered from Parts Select, after an INEXPERIENCED plumber had tossed the factory-provided mounting brackets out with the shipping carton. Relief!