The tub dampening straps support the wash tub and reduce vibration by keeping the tub at the center of the cabinet. If your washer shakes and moves, or is making a loud banging noise during the wash cycle, the washing machine tub could be off-balance, meaning one or more of these straps may be loose, or broken. Other symptoms include: the...Read more washer leaking, not agitating, or pumping but not spinning. These straps are sold individually. However, we recommend that you replace all 4 straps at the same time. It is also recommended that you check the tub for cracks where these straps mount.
This easy-to-use white knob helps you control your GE washing machine’s settings like cycle time and temperature. If your current knob is cracked or loose, this replacement makes it simple to get your washer working like new again. Just pop the old one off and press the new one on—it’s a quick fix that brings back smooth, reliable control.
The main tub seal is located between the transmission and the outer tub. It's the primary water seal in the outer tub for the transmission-shaft. This seal is difficult to replace and should probably be installed by a qualified technician.
This tub bearing goes in your washing machine. You will find it on the bottom of the outer tub, where the transmission goes through the tub. If you hear metal on metal when the washer is spinning, you may need to replace the tub bearing. This bearing is made of metal, and is approximately 3 inches wide and 2 inches tall.
This timer dial with compression ring shows you which part of the cycle your washer is in. It is white in color and can be found mounted on the timer shaft. You may need to replace this part if your old timer dial is cracked or damaged, or if it is not indicating correctly. This part is sold separately from the timer knob, and the timer knob clip.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Kimberly - For model number WCSR2090G8WW
August 25, 2023
My washer drains but won't spin. It smelled like burning rubber. The belt looks intact. The washer is approx 12-15 years old. Wondering if it's an expensive or easy repair? Or worth repairing?
Hi Kimberly, thank you for getting in touch. If the belt is not damaged or worn out, then the pulley, part number PS273817, is most probably faulty and may need to be replaced. Let us know if you have further questions!
I recently moved into a new apartment got the hoses connected plugged it in and it seems like there’s no power as water will not come out. I made sure the hoses have water pressure filling up in them and am not sure what else would be causing this no power problem.
Hi Thomas,
Thank you for your question. If the washer is not filling with water, there are some parts that you will need to check to see which one is causing the issue. You will need to check the temperature switch, the water pressure hose, the water inlet valve, the drain pump and motor assembly and the pressure switch. You will need to test the parts with a multimeter. Here is a link to one of our videos on YouTube that you may use as a general reference on how to use one, https://www.youtube.com/watch?v=bWC44fHn0As. We hope this helps. Thank you and have a great day.
1 personfound this instruction helpful.
Was this helpful?
Thank you for voting!
LINDSEY - For model number WCSR2090G8WW
December 1, 2019
I am having trouble with the amount of lint on my clothes after i wash them. All my clothes are caked in lint... i am not quite sure what is doing this and how to fix it. please let me know
Hello LINDSEY and thanks for writing.
Excessive lint on clothes after washing may also indicate that the water pump filter is clogged. When that happens, the wash and rinse water with all that suspended lint drains too slowly and leaves deposits on wet clothes. ... There are external lint filters for some models that can be connected to the washer to prevent this problem. We hope this helps. Please contact us anytime.
Was this helpful?
Thank you for voting!
Prev
1
Next
✖
Ask a Question
Ask our experts a question on this model and we'll respond as soon as we can.
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Control knob teeth were worn
510 of 517 peoplefound this instruction helpful.
Charles from Dallas, GA
Really Easy
Less than 15 mins
Pliers
I spoke to a very nice young ladie who took my order and I received my order within two days. I pull the clasp off of the old knob and replace the knob and the clasp with the new part and it now works great. Thank you for helping me find the part I needed.
Was this helpful?
Thank you for voting!
The original Knob just fell apart
380 of 390 peoplefound this instruction helpful.
Irina from Englewood, NJ
Really Easy
Less than 15 mins
The repair was so easy when I got the part, I did it myself without any help in 5 seconds!
Was this helpful?
Thank you for voting!
Washing Machine was not draining water from tub.
304 of 334 peoplefound this instruction helpful.
Gerald from Midlothian, VA
Easy
30 - 60 mins
Nutdriver, Pliers
1. Drained the wash tub by taking the drain hose from the back of the washing machine and dropping it below the tub - water flowed out of hose a lot easier than trying to suck water out of tub using a pump (tried this on the first time I tried to fix washer). (Washing machine on 2nd floor of house and didn't want water running on floor)<
... Read morebr />2. Removed the 2 bolts holding the Pump/Motor assembly to the machine. 3. Removed both hose clamps on the Pump/Motor assembly and removed Pump. 4. Attached the new drain inlet hose to the pump and then to the tub with the original hose clamps. 5. Attached the drain hose to the pump and then plugged in the 2 wires for the pump. 6. Plugged in the washing machine and everything worked.
NOTES: 1. Hardest part was working with hose clamps (spring type clamps) in the tight space under the machine. 2. Easier to fix since I pulled machine apart a few days before - removing the clog in the pump/motor assembly only to get everything back together to find out that the motor was dead. Still well worth the time and effort due to not having to go out and buy a new Machine...
My Orders
