UT20817 (ST2517CR) Homelite Trimmer - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
25cc Cylinder Kit – Part Number: UP07145A
$56.95
Special Order
25cc Cylinder Kit
Part #UP07145A
Control Handle Assy. – Part Number: UP03113
$22.95
Special Order
Control Handle Assy.
Part #UP03113
Screw- Hex Cap – Part Number: 80295
$5.95
Special Order
Screw- Hex Cap
Part #80295
String Head Assembly – Part Number: 000998265
$111.64
Special Order
String Head Assembly
Part #000998265
Genuine OEM replacement part, This item is sold as a kit. This is the complete Stringhead Assembly for the Trimmers shown below. It is a dual line head. To install this part, slide it on the spindle or shaft of the Trimmer The kit contains two Spool Retainers to secure the Stringhead. The red one has left hand threads and the black one has right hand threads. It will depend on the model you have, on which Spool Retainer to use. The cutting line diameter used in this Stringhead is .095
Clamp- Wire – Part Number: 690765001
$5.95
Special Order
Clamp- Wire
Part #690765001
This is a genuine Homelite replacement part designed for use with String Trimmer and Blowers. The purpose of the wire clamp is to secure the fuel line to the filter. It is made out of metal and it is sold individually. To replace it you may need pliers.
Screw, Thread Form (6-19 X 1/2 – Part Number: 82513
$5.95
Special Order
Screw, Thread Form (6-19 X 1/2
Part #82513
This is a genuine replacement part sourced from the original manufacturer for use with outdoor power equipment. The special screw is used with a variety of equipment and its application can vary based on the model. This screw is sold individually, please see diagram for part location and usage.
Screw (st-155) – Part Number: 82538
$5.95
Special Order
Screw (st-155)
Part #82538
A genuine replacement part which is supplied directly from the original equipment manufacturer for use with Homelite and Ryobi handheld lawn and garden equipment. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality screw is made of durable metal and is sold individually.
Short Block (Non-Clutch) – Part Number: 984525001
$170.95
Special Order
Short Block (Non-Clutch)
Part #984525001
Carburetor – Part Number: 984534001
$145.95
Special Order
Carburetor
Part #984534001
It is an authentic OEM sourced item that is specially designed for Homelite handheld lawn and garden equipment. The carburetor is designed to mix the air and the gas before the combustible mixture goes to the engine, over time components may wear out and begin to fail eventually requiring a replacement. This high-quality metal body item is sold individually, keep in mind it includes one composite material gasket and one rubber hose. Make sure to check the appropriate diagrams of your specific model for the correct location and application of this carburetor.
Air Filter and Switch – Part Number: UP04741A
$16.95
Special Order
Air Filter and Switch
Part #UP04741A
Spring - Compression – Part Number: 95020A
$5.95
Special Order
Spring - Compression
Part #95020A
Baffle-Air – Part Number: PS00326
$5.95
Special Order
Baffle-Air
Part #PS00326
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
fuel line leaks
15 of 35 people found this instruction helpful.
  • john from Massena, NY
  • Really Easy
  • Less than 15 mins
  • Screw drivers
As others have said , simply remove old tank and tubes and replace in reverse order., being sure tube from filter goes to primer bulb.
Was this helpful?
Thank you for voting!
No directions on how the line went counterclockwise or clockwise
4 of 6 people found this instruction helpful.
  • tom from LINCOLN PARK, MI
  • Really Easy
  • 15 - 30 mins
Put the head on the line that they sent was too thick and brittle and was constantly breaking so I put the line that I have always used and it worked perfectly
Was this helpful?
Thank you for voting!