TU-216-2330 Bostitch Nailer - Overview

This is an original Bostitch replacement part for use with pneumatic staplers. This versatile o-ring can have multiple applications, but is usually found in the trigger valve assembly. O-rings and seals wear out over time from normal use, replacing worn o-rings or seals is recommended when maintaining pneumatic tools. This o-ring is sold individually, please see model diagram for location of the o-ring.

It is an authentic manufacturer sourced replacement part designed for Bostitch staplers and nailers. This o-ring provides an air-tight seal for the trigger valve assembly, make sure to check appropriate diagram for correct application of this item. Over time rubber o-rings tend to shrink, become brittle and crack allowing eventually requiring replacement. Please note this high quality item is sold individually.

The o-ring attaches to the frame. This part is sold individually and is made out of rubber. It is an OEM part sourced directly from the manufacturer and used in staplers and nailers made by Bostitch. You may need a screwdriver and a set of pliers when replacing this part. It may become broken and will need to be replaced.

This is a genuine replacement part that is supplied directly from original manufacturer. It is specially made for Bostitch nailers/pinners. It plays and essential role because it is the part that drives the nail into the material. Drivers do have a tendency to bend or break if not used correctly or if you are driving nails into an extra h...Read moreard material. Includes a plastic piston, metal driver and the rubber o-ring. Replacing this driver unit is a simple and quick task. • First you want to remove the exhaust cover • Remove old piston/driver assembly and install new one • Secure the cover and test the tool

This item is a genuine OEM replacement part by Bostitch. It is a part of the trigger valve assembly. These parts may need replacement if air is leaking through the trigger. An O-ring is a bendable piece that acts as a seal between rigid parts, designed to retain pressure. This piece is sold individually. Also sold with Trigger Valve Kit, part # TVA5.

This OEM replacement part is compatible with various models of Bostitch staplers and nailers. An O-ring is a flexible circle molded to create a tight pressure seal between rigid parts. A damaged or incompatible O-ring may cause tool failure. Sold individually. • Size: 1.301" x .070"

It is a genuine OEM supplied replacement part which is specially designed for use with Bostitch nailers and staplers. The purpose of this o-ring is to provide an air-tight seal between connected parts. Unfortunately, over time it may wear out and begin to crack eventually requiring a replacement. Make sure to refer to the appropriate diag...Read morerams of your model for the correct location and application of this hardware. Keep in mind this high-quality o-ring is made of durable rubber and is sold individually.

This item has been sourced from the original manufacturer to be used with pneumatic fine wire staplers from Bostitch. The bumper fits into the bottom of the cylinder assembly. The bumper is used to absorb the impact of the piston. This item is sold as an individual replacement part.

It is a genuine item that is supplied by the original equipment manufacturer for use with Bostitch nailers and staplers. This is an identical replacement for a missing or a faulty trigger that was installed on a new unit. The part provides a user with a comfortable grip for operating the switch, please make sure to refer to the appropriat...Read moree diagrams of your model for the correct application of this component. Keep in mind this high-quality trigger is made of durable material and is sold individually. Note, the PIN, SPECIAL 174268 utilized to secure the trigger is sold separately.