TC607S0 Jenn-Air Trash Compactor - Overview

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
15 Inch Compactor Bags - 15 Pack – Part Number: W10165295RP
$47.25
In Stock
15 Inch Compactor Bags - 15 Pack
★★★★★
★★★★★
(8)
Part #W10165295RP
These bags will fit most 15" rectangular compactors.
Touch-Up Paint - White – Part Number: 72017
No Longer Available
Touch-Up Paint - White
★★★★★
★★★★★
(23)
Part #72017
This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, and freezers. This is a genuine OEM part and includes a brush applicator. Please remember to wear gloves to protect your hands when applying this paint.
15 Inch White Plastic Compactor Bags - 60 Pack – Part Number: W10165294RB
$91.69
In Stock
15 Inch White Plastic Compactor Bags - 60 Pack
★★★★★
★★★★★
(13)
Part #W10165294RB
Plastic compactor bags. 50% post-consumer recycled plastic 3 millimeters thick to protect from tearing. Slip-N-Grip design prevents the bag from slipping into the compactor. Fits 15" rectangular compactors.
BRACKET-DOOR STOP,ZINC – Part Number: W11745278
$18.95
In Stock
BRACKET-DOOR STOP,ZINC
★★★★★
★★★★★
(5)
Part #W11745278
This hinge bracket, also known as a door stop, is attached to the bottom of the door and is used to limit how far the door swings out to protect the refrigerator itself, and any surrounding cabinets from potential damage. If your fridge is having issues opening or staying closed, check the hinges for any damage or cracking. To replace this bracket, simply remove the door off your refrigerator, unscrew and remove this bracket from the bottom of the door, and install the new one. This hinge bracket is an OEM replacement and is compatible with several different makes and models of refrigerator.
15" Paper Compactor Bags - 12 Pack – Part Number: 675186
No Longer Available
15" Paper Compactor Bags - 12 Pack
Part #675186
Moisture-resistant liner. Pre-cuffed.
Washer Front Leveling Foot – Part Number: WPW10001130
$9.85
In Stock
Drive Gear Kit – Part Number: 882699
$118.91
On Order
Drive Gear Kit
★★★★★
★★★★★
(15)
Part #882699
This part is located at the bottom of your compactor and helps the drive motor power the compacting ram. If the drive gear is broken, damaged, or noisy, we suggest replacing it right away to avoid causing any more issues with your trash compactor. This kit includes the gears, washers, retainer clip, ram stop, and ram cam. This drive gear kit is a genuine OEM part, is white in color and made from plastic. Please remember to disconnect the power before starting your repair.
Off-Switch Actuator Kit – Part Number: W10342596
$196.97
Special Order
Off-Switch Actuator Kit
★★★★★
★★★★★
(2)
Part #W10342596
This kit contains the normally closed switch, toe guard, template, 2 screws and actuator. NOTE: This part has been redesigned by the manufacturer but will still function the same as the original part.
Charcoal Filter – Part Number: WP4151750
$24.15
Special Order
Charcoal Filter
Part #WP4151750
This black charcoal air filter helps control odors inside your trash compactor. Made from activated carbon, it fits select Whirlpool and KitchenAid models and installs easily without tools. Measuring about 4½ inches square, it’s a simple way to keep your kitchen smelling clean.
Deodorizer Block - Green Apple – Part Number: W10540355
$23.24
Special Order
Deodorizer Block - Green Apple
Part #W10540355
Sold individually.
Refrigerator Screw – Part Number: WP489478
$10.41
In Stock
Refrigerator Screw
Part #WP489478
Sold individually.

Manuals & Care Guides for TC607S0

Click to download

Common Symptoms of the TC607S0

How this model fails, and the parts that fix it.

Watch our pros, then fix it yourself.

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Beware the "two screws, five minutes" repair stories!
169 of 176 people found this instruction helpful.
  • Scott from Ventura, CA
  • Difficult
  • 1- 2 hours
  • Pliers, Screw drivers, Socket set
Needed a replacement actuator for KitchenAid trash compactor model KUCS03FTSS0. The part that broke is a small metal flange held in place by two screws. PartSelect.com clearly shows this part in the online exploded view of Container Parts. When I received the replacement order in the mail, I was surprised that it was not what I thought I had ordered (a single replacement piece), but a new, *completely redesigned* actuator kit. For this model (and perhaps for other models) this new kit requires much more extensive work than just replacing two screws. Repair entailed removing the trash compactor from its installation position, removing the recess cover and machine front, disconnecting and removing the old actuator switch, drilling holes in the machine front, attaching the new actuator assembly, and disconnecting and reattaching the foot pedal. Not an overly burdensome or complicated repair, but I had been fooled by the expectation of it being a five-minute job! (Submitted on 7/2/2011 by Scott - Ventura, CA)
Was this helpful?
Thank you for voting!
Compactor stuck in lower position
68 of 84 people found this instruction helpful.
  • Asbjorn from The Woodlands, TX
  • Easy
  • 1- 2 hours
  • Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
Moved the compactor out from under cabinet and unplugged the powercable.Laid compactor over on its side Removed the top (4 screws) and base plate (3 screws) as well as the coverplate for the motor(3 screws)Found that large drive was broken in half. Used two screwdrivers to start split ring then pliers to pull it off the rest of the way.