TC507B1 Jenn-Air Trash Compactor - Overview

Diagrams for TC507B1

See every part. Know exactly what you need.

Parts for the TC507B1

$47.25

15 Inch Compactor Bags - 15 Pack

★★★★★

(8)

Part #W10165295RP

These bags will fit most 15" rectangular compactors.

Touch-Up Paint - White

★★★★★

(23)

Part #72017

This 18 ml bottle of white appliance touch-up paint is used to cover scratches or marks on your appliance. The white touch-up paint can be used on refrigerators, microwaves, ranges, clothes dryers, and freezers. This is a genuine OEM part and includes a brush applicator. Please remember to wear gloves to protect your hands when applying this paint.

$91.69

15 Inch White Plastic Compactor Bags - 60 Pack

★★★★★

(13)

Part #W10165294RB

Plastic compactor bags. 50% post-consumer recycled plastic 3 millimeters thick to protect from tearing. Slip-N-Grip design prevents the bag from slipping into the compactor. Fits 15" rectangular compactors.

$9.85

Washer Front Leveling Foot

★★★★★

(3)

Part #WPW10001130

Sold Individually.

$118.91

Drive Gear Kit

★★★★★

(15)

Part #882699

This part is located at the bottom of your compactor and helps the drive motor power the compacting ram. If the drive gear is broken, damaged, or noisy, we suggest replacing it right away to avoid causing any more issues with your trash compactor. This kit includes the gears, washers, retainer clip, ram stop, and ram cam. This drive gear ...Read more

Read less

Touch-up Paint - Black

★★★★★

(1)

Part #72032

16ml

$10.41

Refrigerator Screw

Part #WP489478

Sold individually.

$53.85

15" Compactor Bag Carrier with Easy Grip Handles

★★★★★

(2)

Part #13030RP

Compactor bags are sold separately.

$80.25

Trash Compactor Directional Switch

★★★★★

(4)

Part #WP777811

This top limit and direction switch controls power to the trash compactor motor, it stops the motor when the ram reaches the top, a bad switch may cause the ram to get stuck, keep the motor running, or stop the compactor from starting, unplug the compactor before repair, check the model number before ordering

$20.73

Drawer Roller

★★★★★

(1)

Part #WP9871602

Appliance takes 2 - Sold individually.

$9.85

Range Screw

Part #WP3196175

This screw is sold individually. 8-18 x 3/8

$159.97

Rotary Switch Kit

★★★★★

(2)

Part #675382

This kit comes with an on-off rotary switch and two chrome knobs.

Questions And Answers for TC507B1

Ask our experts a question about this model and we'll get back to you as soon as possible!

Sort by:

Steve - For model number TC507B1

February 21, 2023

Part Number: WP777811 The small metal arm broke off can I replace that or do I have to replace entire thing

Hello Steve, thank you for reaching out. Based on our research, the metal arm is not sold separately. You are suggested to replace the whole switch, part number PS11744742. We hope this information helps!

$80.25

Trash Compactor Directional Switch

Was this helpful?

Rebecca - For model number TC507B1

July 12, 2025

Does PS398581 fit the foot pedal for a Jenn air trash compactor?

Hi Rebecca, thank you for the question. Yes, the foot pedal, part number PS398581, you have mentioned will fit into your model. We hope that helps!

$95.79

Foot Pedal

Was this helpful?

Common Symptoms of the TC507B1

How this model fails, and the parts that fix it.

Compactor ram gets stuck

Fixed by
these parts

Show All

Doesn’t stop at end of compacting cycle

Fixed by
these parts

Show All

Drawer is hard to open and or close

Fixed by
these parts

Videos related to the TC507B1

Watch our pros, then fix it yourself.

Replacing the Washer Front Leveling Foot

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Compactor stuck in lower position

68 of 84 people found this instruction helpful.

Asbjorn from The Woodlands, TX
Easy
1- 2 hours
Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)

Moved the compactor out from under cabinet and unplugged the powercable.Laid compactor over on its side Removed the top (4 screws) and base plate (3 screws) as well as the coverplate for the motor(3 screws)Found that large drive was broken in half. Used two screwdrivers to start split ring then pliers to pull it off the rest of the way. ... Read more r />Removed the drive gear and the washer.
Used a nail to drive out the pin for the smaller drive gear kit. Removed and replaced with new, used new pin to lock it on to the shaft. Changed out the bearings and washers on one powerscrew, put chain back on. Then was then a simple matter to put the new gear back on the chain then slide the whole thing back on the drive shaft. Replace the washer then slip the split ring back in place and seat it home with the pliers. Greased chain, gear drive and powerscrew. Put all covers back on with the screws. Pushed button it worked.
Read less

Other Parts Used:

STOP CAP

Drive Gear Kit

Washer

Trash Compactor Bearing

Was this helpful?

Thank you for voting!

Trash Compactor ram wouldn't lower

46 of 54 people found this instruction helpful.

Scott from Indianapolis, IN

Easy

15 - 30 mins

Nutdriver, Screw drivers

I pulled the trash compactor out from under the counter.

I took out the four screws that kept the top cover in place to expose the ram.

The gear shafts were turning but the ram would not lower, at first I though the ram drive bolts were stripped and it wouldn't engage the shaft. Then I realized there was a mechanical ... Read more directional\limit switch at the top that controlled the power and direction the gear shafts were turning, this switch was broken.

Just had to take off the front plate that was held on by a number of screws and replace the switch that was held on by two more screws. It had five wires attached to it, the new switch was clearly labeled as to which color wire went where.
Read less

Was this helpful?

Thank you for voting!

Change out defective switch

37 of 50 people found this instruction helpful.

Edward from Deerfield Beach, FL

Really Easy

Less than 15 mins

Screw drivers

Pulled out compactor drawer and removed same, slid the compactor cabinet out and unpluged the appliance. Removed the two phillips head screws to release the control panel. lossened the locking nut from switch. matched the switches to be sure parts were the same,switched the wires to the new switch and reinstalled.replaced phillips screws, ... Read more all Done !!!
Read less

Other Parts Used:

15" Compactor Bag Carrier with Easy Grip Handles

Rotary Switch Kit

Was this helpful?

Thank you for voting!

View More