T18J4EFHT4 (AEBETUS) LG Washer - Overview

Diagrams for T18J4EFHT4

See every part. Know exactly what you need.

Parts for the T18J4EFHT4

$45.05

Pulsator Cap

★★★★★

(1)

Part #5006EA3009B

This part is known as a pulsator cap or washplate cap, and is designed for your LG washer. It fits over the washplate mounting bolt and prevents clothes from getting caught on the washplate during a wash cycle. It is round in shape, and approximately 3 inches in diameter.

$184.45

Pulsator Assembly

★★★★★

(8)

Part #AGZ72909711

This is a pulsator assembly, also known as an agitator, for your washing machine. This pulsator sits at the bottom of your washer and is what is used as the main driving force to wash your clothes. If the pulsator in your washer is broken, it will need replacing immediately to continue to wash and clean your clothes evenly. The cap that sits in the center of this part is sold separately.

$57.15

Washer Switch Assembly sensor

★★★★★

(3)

Part #6501EA1001R

$24.15

Screw

★★★★★

(2)

Part #FAB30598601

$64.85

MOTOR ASSEMBLY,DC,CLUTCH

★★★★★

(1)

Part #EAU64283201

Keep your washer running smoothly with this clutch motor assembly. It helps the drum switch between washing and spinning so clothes get clean and water is removed efficiently. If your washer won’t spin, makes strange noises, or shows error codes, this part may be the fix. Just unplug the machine before replacing.

$13.15

Common Washer

Part #FAF30369201

$13.15

Holder

Part #4930EA3002A

$132.00

PACKAGE ASSEMBLY

Part #AGF30196101

$27.45

Washer,Common

Part #4040FA4045C

$13.15

WASHER,COMMON

Part #1WZZEA4002C

$56.05

Drain Hose Assembly

Part #AEM75152901

If your washer isn’t draining properly or is leaking, this drain hose is the fix you need. It moves water out of the tub during the cycle and is built from tough, long-lasting materials to handle everyday use. Easy to install and reliable, it helps keep your laundry routine running smoothly.

$40.95

CONNECTOR,DRAIN HOSE

Part #MCD62647002

Common Symptoms of the T18J4EFHT4

How this model fails, and the parts that fix it.

Will not agitate

Fixed by
these parts

Marks left on clothes

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

The bolt in pulsator kept coming out during the wash

6 of 6 people found this instruction helpful.

Deresa from BOLINGBROOK, IL
Really Easy
Less than 15 mins
Socket set

I found the pulsator just spun freely, I determined the hole on underside should ribbed to align with the ribbed shaft. But it was wore away. I purchased the new part and replacement was simple. It slide right on and I replaced the bolt. Pulsator works great, washing again.

Was this helpful?

Agitator was free spinning

8 of 14 people found this instruction helpful.

Joel from JASPER, MO
Very Easy
Less than 15 mins
Nutdriver, Screw drivers

Removed the center cover cap carefully on top of the agitator with a small screw driver. There are 3 (on mine) little slots around the edge of the bottom of the cap where it meets the agitator. Insert the small flat blade screwdriver and gently twist at each one till the cap pops loose and comes off.

There was a 10MM bolt under ... Read more

Read less

Was this helpful?

Pulsator stripped out

5 of 7 people found this instruction helpful.

Anthony from FT WORTH, TX
Really Easy
15 - 30 mins
Screw drivers, Socket set

The teeth in the pulsator assembly where stripped out on the original plate.

Ordered the replacement and it was 1 screw to undo and pop in the new assembly. Super easy repair

Was this helpful?