ST6500 (Type 1) Black and Decker Trimmer - Overview

This is a Genuine Manufacturer Sourced replacement part used on a variety of Black and Decker Trimmers/Edgers. This item is Sold Individually. Switches are a commonly replaced part in power tools, handling on/off operations. Because switches use mechanical internals, they will degrade and wear out over time, eventually requiring replacement.

This genuine Black & Decker replacement spool cap is designed to hold the spool and bumper securely inside the spool housing of your trimmer. It features two snap-in tabs that make installation and removal quick and easy—just press the tabs to release it from the housing when it’s time to replace or clean. Made from durable plastic, this ...Read morepart is sold individually and measures 2-5/8 inches wide. If your current cap is cracked, missing, or no longer holding the spool properly, this is the part you need to get your trimmer back in action. Be sure to check your model’s diagram or manual to confirm the correct fit.

Keep your trimmer cutting cleanly with this genuine DeWALT replacement spool. Designed for the models listed below, this OEM part comes pre-loaded with 20 feet of .065-inch diameter cutting line, making it quick and easy to swap out when your line runs low. Built for durability and performance, this spool ensures smooth, efficient trimmin...Read moreg and is sold individually. For best results, always use .065-inch diameter line when refilling.

Genuine Black and Decker replacement part, this item is sold individually. This screw is used to secure the line cutting blade located on the trimmer guard on the models shown below. Depending on the model you have you may need one or two of these.

Genuine Black and Decker replacement part, it is sold individually. The purpose of the 682235-00 spring is to keep tension between the spool and the spool housing. Overtime the spring will lose its tension and will have to be replaced.

This is a genuine DeWalt replacement part that has been sourced from the original manufacturer to be used with electric trimmers. The copper contact is used to link the switch assembly to the extension cord assembly. This contact is sold as a single item, please note the other contact is sold separately.

This is an authentic replacement part manufactured for use with Black and Decker trimmers. The auxiliary handle is the forward handle used to provide greater control over the trimmer while the trimmer is in operation. This handle is sold individually, please note the hardware used to mount the handle is available separately.

This is a genuine OEM sourced replacement part designed for use with a wide variety of power tools and gardening equipment. This wing knob is a piece of standard hardware which is used in different applications based on your unit. Please make sure to check appropriate diagrams for correct location and use of this item. It is made out of metal and it is sold individually.

Genuine Black and Decker replacement part, this item is sold individually. This is the part that cuts the trimmer line on the Black and Decker models listed below. It is mounted to the trimmer guard. It is mounted to the guard by the screw part number 681914-00.

This replacement part is genuine OEM made specifically for trimmers listed below. This is the control trigger, located in the main upper handle. When disassembling handle to replace this part, do so slowly to avoid losing springs. Trigger spring is available separately as part # 244053-00; they're lost and worn out easily, so having a backup wouldn't be a bad idea. Trigger is sold individually.