ST100 (Type 1) Black and Decker Trimmer - Overview

This is a Genuine Manufacturer Sourced replacement part used on a variety of Black and Decker Trimmers/Edgers. This item is Sold Individually. Switches are a commonly replaced part in power tools, handling on/off operations. Because switches use mechanical internals, they will degrade and wear out over time, eventually requiring replacement.

This genuine Black & Decker replacement spool cap is designed to hold the spool and bumper securely inside the spool housing of your trimmer. It features two snap-in tabs that make installation and removal quick and easy—just press the tabs to release it from the housing when it’s time to replace or clean. Made from durable plastic, this ...Read morepart is sold individually and measures 2-5/8 inches wide. If your current cap is cracked, missing, or no longer holding the spool properly, this is the part you need to get your trimmer back in action. Be sure to check your model’s diagram or manual to confirm the correct fit.

This brush holder is an authentic manufacturer sourced replacement part that is used with Dewalt and Black and Decker power tools. This part is designed to secure the carbon brush which is sold separately. It is made from durable plastic with metal and it is sold individually.

Genuine Black and Decker replacement part, it is sold individually. The purpose of the 682235-00 spring is to keep tension between the spool and the spool housing. Overtime the spring will lose its tension and will have to be replaced.

This is a genuine DeWalt replacement part that has been sourced from the original manufacturer to be used with electric trimmers. The copper contact is used to link the switch assembly to the extension cord assembly. This contact is sold as a single item, please note the other contact is sold separately.

It is a high-quality replacement part that is supplied by original equipment manufacturer for use with Black and Decker and Porter Cable power equipment. The purpose of the brush spring is to provide tension that will help to push the carbon brush against the armature. Over time the spring may lose its tension eventually requiring replace...Read morement for the tool to function as intended. It is made from high-quality metal and it is sold individually.

Genuine Black and Decker replacement part This brush is sold individually, 2 are needed for the tools shown below It is always best to replace both brushes, even if only one is worn. Worn brushes frequently are the cause behind a motor running poorly. Replacing brushes can fix a motor that's operating intermittently. New brushes can ...Read morerestore a motor's electric braking. Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problem