This gray mounting bracket is designed to securely hold the dish rack in place inside your dishwasher during operation. Measuring 1 inch by 1 inch, it ensures stability and helps prevent the rack from...
The dishwasher roller assembly connects to the dishrack, and is located in the lower level of the dishwasher. It allows the dishrack to easily slide in and out. If the lower rack keeps falling off the...
This drain hose assembly is designed for use with select LG washing machines and includes both the flexible rubber hose and plastic connectors. It efficiently channels used water from the washer tub t...
This part is the replacement inlet valve for your dishwasher. It is approximately 4-1/2 inches by 3-1/2 inches. The water inlet valve in your dishwasher connects to the water source and solenoid wire...
This grey tine row retainer is designed to securely hold the horizontal tine rows on your dishwasher rack, keeping them in place so dishes stay organized and stable throughout each wash cycle. It clip...
If your dishwasher rack isn’t sliding smoothly or feels wobbly, this replacement rail assembly can help. It gives the rack a stable track to glide on, making loading and unloading easier. Designed for...
This dishwasher hose connector ensures a secure connection between the water feed tube and pump housing, allowing proper water flow for efficient cleaning and leak prevention. Made from durable materi...
Ask our experts a question about this model and we'll get back to you as soon as possible!
1 question answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Travis
August 14, 2025
Not heating water while washing or drying, throwing code he. I know that this model does not have a heating element so what part should I order
For model number SKSDW2401S
Hello Travis, thank you for getting in touch. According to our research, you will need to replace the control board, part number PS12714499, to fix the issue. We hope this helps.
Ordered the roller from Parts Select, slid the roller over the little spindle sticking out of the bottom rack and snapped it in place. Job done in less than one minute.
Remove the lower dish rack, and remove the filter and screen. Using a screwdriver, remove the 4 screws that attach the bottom wash arm, and lift off. Remove the retaining screw on the rubber boot. Slide the boot off of the square steel tubes (there is a metal clamp around this connection, you may need to use pliers to open it. The clamp mechanism is a simple latch that you have to push apart from the two tabs). Open the clamp that came with the replacement part and examine the mechanism to see how it needs to be oriented to secure it. Slide the new boot on, close and latch the clamp. Replace the retaining screw, then the main bottom wash arm with it's 4 screws, the replace the screen and filter and bottom rack.
Saw a YouTube video that explained the problem was the pump. Removed dishwasher from under the counter, flipped it on its side, and unplugged the unit. Removed bottom cover and the pump is right there. Used pliers to lose and move 3 hose clamps. Unplugged 3 wires and unscrewed the ground. Unhooked rubber hold downs and removed. Installed new pump. Parts Select pricing was best I found and shipping was fast. Nice to have a quiet house again when running the dishwasher. Cost in total was less than $100.
