This is a replacement dishrack roller or wheel for your dishwasher. It is made of gray plastic, measures a little over an inch in diameter, and is sold individually. This roller is designed for the lower dishrack of your dishwasher. On one side of the roller is a clip that allows it to be attached to the dishrack. The dishrack roller allo...Read morews you to slide the dishrack in and out of the dishwasher efficiently. If one of the rollers is broken or missing, it can cause the dishrack to become difficult to slide in and out. To replace the roller, simply snap it off the dishrack, and snap the new one into place. This is a genuine OEM part.
This water access valve, also known as a water inlet valve, is a genuine replacement component designed for use in compatible dishwashers. It regulates the flow of water from the household supply into the dishwasher tub during the wash cycle, based on signals from the electronic control board. Once the appropriate water level is reached, ...Read morethe valve closes to prevent overfilling. A malfunctioning valve may result in poor cleaning performance, water leakage, or failure to start, and is commonly associated with the E15 error code. Sold individually.
This genuine OEM dishwasher mounting bracket is designed to securely fasten the appliance to the surrounding cabinet or countertop, helping ensure stable and safe operation. Typically sold as a pair, these durable metal brackets prevent tipping, shaking, and unwanted movement during use, reducing vibration and noise. Ideal for replacing w...Read moreorn, bent, or missing brackets, they help restore proper installation support and improve overall performance. Easy to install with basic tools, this component is an effective solution for maintaining the stability and reliability of your dishwasher.
This dishwasher door gasket creates a watertight seal between the door and the tub, preventing leaks during wash cycles. Made from flexible black rubber, it fits securely along the edge of the door to keep water contained inside the appliance. Over time, the seal may wear out or become damaged, leading to visible leaks or moisture around ...Read morethe door. If you notice water escaping during operation, replacing the gasket can restore proper sealing and protect your kitchen from water damage.
This kit includes 2 spring and 2 cables. This door spring kit is for dishwashers.
Door spring kit applies tension to the dishwasher door through the door hinge to prevent the door from dropping too quickly when you open the dishwasher. The kit may include multiple parts; refer to your parts diagram for a list of parts included.
This part is a replacement tine row clip for your dishwasher. The tine row clip is adjustable, and it fits onto your dishrack to holds the tines into place. If your dishrack tine rows will not stay in position, you could have one or more broken tine clips. To replace a tine row clip, simply snap the old tine row clip out, and replace it w...Read moreith the new clip. This part is made of gray plastic and is approximately one inch long and half an inch wide. This part is sold individually, so it is a good idea to check all of your tine row clips to determine if more than one are broken.
This replacement micro filter is designed to trap small food particles and debris during the wash and rinse cycles, helping to maintain optimal cleaning performance in your dishwasher. Positioned within the tub, it prevents contaminants from clogging the pump or recirculating onto clean dishes. Signs of a worn or faulty filter include poo...Read morer cleaning results, slow drainage, standing water, or unusual noises during operation. For best results, clean the filter monthly and replace it if damaged. Always check compatibility with your dishwasher model before purchasing.
This upper spray arm is a key component in many dishwashers, designed to distribute water evenly across dishes placed in the top rack. Located beneath the upper rack, it features multiple nozzles that propel water at high pressure, rotating during the wash cycle to ensure thorough cleaning. Made from a combination of metal and plastic, th...Read moreis part is built for durability and performance. If the spray arm becomes clogged, cracked, or fails to rotate properly, it can lead to poor cleaning results and unusual noises. Replacing it can restore your dishwasher’s efficiency. Sold individually.
This drain hose helps your dishwasher get rid of dirty water after each cycle. It connects to your home’s plumbing and keeps things flowing smoothly. If your dishwasher isn’t draining, smells bad, or you see water leaking, the hose might be the problem. Replacing it is a simple way to fix those issues—just make sure it fits your model before installing.
This lower dishrack is designed to securely organize cutlery, utensils, and small items during the wash cycle, helping ensure thorough cleaning and proper water circulation. By keeping items upright and separated, it reduces the risk of nesting and prevents utensils from falling into the tub or pump area, which can cause damage or interru...Read morept operation. Replacement is recommended if the original basket is cracked, warped, or missing sections, as damaged grid walls or sharp edges can affect cleaning performance and potentially harm dishes. Installing a properly fitted basket helps restore safe loading, consistent wash results, and dependable everyday use. NOTE: This dishrack has been redesigned by the manufacturer. Before installing the redesigned dishrack, check the bottom of your current silverware basket. If it has built-in grooved cutouts, it is compatible with the updated tine layout and no additional parts are required. If the basket has a flat bottom without cutouts, it must be replaced with the updated silverware basket (part #11026683) to ensure proper fit and functionality.
Having trouble with your dishwasher? Let's help you solve that with the Bosch Dishrack Tine Row Holder. This is an original, high-quality part that helps your dishwasher work at full efficiency by securely attaching the tine row to the dishrack. This key part ensures your dishes are held properly, leading to cleaner results. Widely compa...Read moretible, it fits seamlessly with various Bosch dishwasher models and even some Thermador and Gaggenau models. All you need to do is pop on your work gloves and you're all set for a straightforward installation. Remember, even if a part looks nearly identical, slight differences in size and shape can make a significant impact on performance. So, to avoid any installation hassles or dishwasher mishaps, please confirm this part is the right fit for your particular model before purchasing it. Get your dishwasher back to peak performance today with the Bosch Dishrack Tine Row Holder.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Andrew - For model number SHX68T55UC
September 30, 2023
Dishwasher fills with water and then starts beeping, when opened the water tap light is lit but no error code. Resets and drains fine. Checked both drain filters amd cleaned and problem still persists. Frustrating and I don't want to just start throwing parts at it please advise!
Hi Andrew, thank you for reaching out. First, you may need to make sure that the supply hose is not kinked or blocked. If that is not causing the issue, then you may need to check the water inlet valve, part number PS16746057, as it is most likely faulty and may need to be replaced. We hope this helps!
the label only states SHX68T55UC
how do i know if I have:
Bosch Dishwasher SHX68T55UC /01 or /02 or /07 or /09 ?????
are the parts different?
Hello Ted, thank you for your inquiry. We would need the part you are looking for to compare with each one. Please feel free to give us a call. We look forward to hearing from you.
Was this helpful?
Thank you for voting!
Ed - For model number SHX68T55UC
January 13, 2023
Washer stops mid-cycle, but will continue after opening and pressing start again. I had this problem before, and the consultant gave me a series of steps to reset it, but I don't remember how. I also want the manual. Thank you, Ed
Hi Ed,
Thank you for your question. If your dishwasher stops mid-cycle, there are some parts that you will need to check to see which one is causing the issue. You will need to check the door latch and switches, the electronic control board, the control panel and the heat pump. We have included a link that you may reference on how to check these parts. Once you have determined the part you need, please feel free to call customer service. We are open 7 days a week and anyone will be happy to assist you. We look forward to hearing from you!
When running, I can see water flow down overflow channel to the pan at bottom of machine which trips the foam-pad / float-valve at the bottom.
The problem is that I can't figure out where the water is coming from. I've recently replaced the door seals, so not that. I suspect the machine is overfilling as the depth of the water in machine looks excessive. So perhaps there's a sensor / switch failing somewhere. Would welcome any suggestions
Hello Lindsay, thank you for the question. The water inlet valve, part number PS16746057, is an electrically-controlled valve that opens to allow water to enter the dishwasher. A faulty inlet valve can result in water overflow in the dishwasher you may need to replace the water inlet valve. Also, check the float switch, part number PS8728720. The float lifts as the water level in the dishwasher rise, and when the proper water level is reached, the stem of the float activates the float switch to turn off the water inlet valve. A malfunctioning float or float switch could cause the water level to be too high and create a leak. We hope that helps!
There is a white part that attaches to the back of the second rack. This part fits into back panel of dishwasher when the rack is pushed in. It has three holes that need thin washers. It doesn’t stay in place anymore.
Hi Pat, thank you for the question. According to our research, the part you are looking for is not sold separately. You would have to replace the tube, part number PS12072215. We hope this information helps!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
A prong in the bottom rack had broken nearly through where it attached to the base & was rusting severely. Several other prongs had also started to rust.
54 of 68 peoplefound this instruction helpful.
Patricia from DALLAS, TX
Very Easy
Less than 15 mins
The bottom rack of our Bosch dishwasher was discontinued & no longer available anywhere, so we ordered an OEM replacement rack from PartSelect.com & hoped that it would fit.
The new rack fits perfectly & is actually an improvement over the old one. The new rack doesn't have a vase tower, but that is actually a big design impr
... Read moreovement because it can store more dishes & is more flexible than the old one. The new rack comes without a handle cover, but it was very easy to move the handle cover from our old rack to the new one.
Read less
Was this helpful?
Thank you for voting!
E:15 error code with Watertap
48 of 72 peoplefound this instruction helpful.
Raymond from VIENNA, VA
Easy
30 - 60 mins
Pliers
The E:15 error code means water is detected in the pan under the unit. There are several ways this can happen.
In this case, it was caused by a bad inlet valve. It did not close properly and led to an overflow of water inside that eventually spilled into the pan underneath the unit.
I see now why the pump keeps run
... Read morening after this error. In this case, it would have led to a big flood in the kitchen if it did not.
I was actually able to run the unit while broke by manually operating the valve under our sink that provides water to the unit.
Be sure to turn off breaker before servicing. Don't get shocked!
Be sure to turn off water before starting! Or, you'll have a flood.
Anyway, I just pulled the unit out (was secured by 2 screws on the sides). I lifted up the insulation material on the left side to get at the valve. Pushed a little green tab to release the electrical plug. Then, use pliers to move clamp off the white water hose on the inside. Then, pull of white hose. This was hard in my case. Took a lot of force. Then, reach behind the unit and use pliers to unscrew water hose. Now, the whole gray panel there can pop out with some force. Then, slip the old valve out and slip new one in. Reconnect hoses and clamp. Note that I put some caulk on the connector where white hose goes. Not sure if needed or not.
Good luck!
Read less
Was this helpful?
Thank you for voting!
The middle rack was rusting and some of the pegs were coming off.
21 of 30 peoplefound this instruction helpful.
Susan from MIDDLEBURY, VT
Really Easy
15 - 30 mins
Removed the spray arm, front handle, and little clips from the old rack and installed onto the new rack. Was very simple.
My Orders
