The dispenser is mounted on the inner panel of the dishwasher door. The cover of the dispenser has a latch mechanism which is controlled by the electronic board or the timer. The latch releases to ope...
$195.13
In Stock
Questions And Answers for SHU43C07UC-17
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Craig
February 13, 2020
Where do all tne hoses go
For model number SHU43C07UC-17
Hi Craig,
Thank you for your question. There are 2 drain hoses listed under your model number. One drain hose, part number PS8701891, goes from the sump to the water inlet. The other drain hose, part number PS8703123, carries the dirty water from the drain pump to the kitchen sink drain. Part number PS8723284 is a fill hose that attaches to the water inlet. Part number PS8704510, is the sump to float hose. Part number PS8702089 is a condensation tube that goes from the right side of the tub for the vent and will run under the unit towards the back. This hose is used for venting purposes. We hope this helps. Thank you and have a great day.
Was this helpful?
Thank you for voting!
Kevin
November 23, 2022
When I start the dishwasher, I can hear the machine run but the water does not spray the dishes. Water is on to the unit
For model number SHU43C07UC-17
Hello Kevin, thank you for reaching out. If your dishwasher is not spraying water, it means there could be a problem with the circulation pump, spray arms, or the water inlet valve. Check these parts for any damage and replace the defective part to resolve the issue. If you require assistance to place an order, please contact customer service. We hope that helps!
I NEED TO ORDER A REPLACEMENT FILTER FOR THE BOSCH DISHWASHER MODEL I GAVE YOU. PLEASE HELP ME TO IDENTIFY THE FILTER I NEED TO ORDER. THANK YOU.
For model number SHU43C07UC-17
Hi Rolf,
Thank you for your question. The part number listed under your model number for the micro filter is PS8727803. The part number listed for the fine filter is PS8715454. If you would like to place an order for these parts, please call our customer service line and anyone will be happy to assist you. We look forward to hearing from you!
Here are the steps you need to take to do the job properly:
1. turn off electrical circuit breaker to the dishwasher 2. remove 8 total hex screws (3 on each side and 2 at the top) of the inside door panel. The door panel will slide off so be careful and it happens pretty quickly when the last hex screw is removed. 3. unplug the wiring harness to the detergent/rinse aid dispenser 4. you need to use a flat head screw driver to lift the metal flanges on the top and bottom of the detergent/rinse aid dispenser. 5. the unit will pop out toward the inside of the dishwasher 6. insert the new detergent rinse/aid dispenser and very important all metal flanges are pulled back over the plastic edge (top and bottom) of the dispenser unit. The screw driver needs to be used to assist in pushing the dispenser unit as tight to the frame of the door to ensure the metal flanges grab hold and lock in. 7. re-attach the wiring harness 8. re-install the dishwasher door with 8 hex screws. Doing this step alone is challenging as the door frame will want to keep going up to close. I used a small foot stool and placed it inside the dishwasher front area on top of the inside metal door area so the door would stay open roughly half way. I then used my knees to prop up the outer door cover while i got 2 screws started then was able to easily complete the job. 9. run the dishwasher with a detergent packet loaded into your new dispenser. I checked for 15-20 minutes during initially running to insure no issues or leaks. 10. One last note - my Bosch dishwasher had a custom wood door installed to the outer panel to blend in with our kitchen cabinets. The door itself was much heavier as a result. Some of you may not experience the slight difficulty i noted above in step 8. Good luck.
I used a wet vac to remove the water from the dishwasher. remove cover and filter/strainer from bottom of dishwasher. remove screw which allows you to lift the plastic piece to access check valve. Original check valve looked like new , I installed new check valve re installed parts . Job done and issue resolved .
With the help of You Tube, this 50 year old Mom got the job done. Not that complicated if you watch the step by step instructions on the Appliance Pro video. My repairman and husband were both determined to just buy a new one but this 20 year old dishwashing genius was just in need of a little repair. Only need a screwdriver, and slightly confusing as wires hook on a little different on new pumps. I suggest watching video the whole way through and then playing it step by step as you do the repair. Worked great for me. Thanks.