This is a replacement dishrack roller or wheel for your dishwasher. It is made of gray plastic, measures a little over an inch in diameter, and is sold individually. This roller is designed for the lo...
This circulation pump with heater is for dishwashers.
Circulation pump with heater moves heated water through the spray arm to clean the dishes.
Unplug the dishwasher before installing this part...
Ask our experts a question about this model and we'll get back to you as soon as possible!
3 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Richie
December 12, 2022
E11 comes up on display. It won’t start washing
For model number SHSM63W55N
Hello Richie, thank you for reaching out. The E11 error code indicates that the resistance values received from the temperature sensor are out of range. On newer Bosch dishwashers the thermistor is integrated into the heat pump. We suggest that you check the circulation pump with the heater, part number PS11724988, and replace it if it is damaged. If you require assistance to place an order, please contact customer service. We hope that helps!
Unit will not power up at all but making low on and off hum. Verified power to plug. No response to reset or reboot (unplug and replug)
For model number SHSM63W55N
Hello Bruce, thank you for contacting us. We have researched and found that the issue seems to be with the control board, part number PS12075525 and Switch, part number PS8728608. If you need help placing an order, customer service is open 7 days a week. Thanks again for your great question.
This dishwasher was replaced some years ago by our Home Warranty Service and we have discovered that the piece below the door (kick plate? ) is missing. Can we get one?
For model number SHSM63W55N
Hi Judy, thank you for your inquiry. The compatible toe panel for your model is part number PS8737021. If you need help placing an order, customer service is open 7 days a week!
The E:15 error code means water is detected in the pan under the unit. There are several ways this can happen.
In this case, it was caused by a bad inlet valve. It did not close properly and led to an overflow of water inside that eventually spilled into the pan underneath the unit.
I see now why the pump keeps running after this error. In this case, it would have led to a big flood in the kitchen if it did not.
I was actually able to run the unit while broke by manually operating the valve under our sink that provides water to the unit.
Be sure to turn off breaker before servicing. Don't get shocked!
Be sure to turn off water before starting! Or, you'll have a flood.
Anyway, I just pulled the unit out (was secured by 2 screws on the sides). I lifted up the insulation material on the left side to get at the valve. Pushed a little green tab to release the electrical plug. Then, use pliers to move clamp off the white water hose on the inside. Then, pull of white hose. This was hard in my case. Took a lot of force. Then, reach behind the unit and use pliers to unscrew water hose. Now, the whole gray panel there can pop out with some force. Then, slip the old valve out and slip new one in. Reconnect hoses and clamp. Note that I put some caulk on the connector where white hose goes. Not sure if needed or not.