SHP78CM2N/22 Bosch Dishwasher - Overview

Diagrams for SHP78CM2N/22

See every part. Know exactly what you need.

Parts for the SHP78CM2N/22

View More

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Access Valve – Part Number: 10023852
$46.92
In Stock
Access Valve
★★★★★
★★★★★
(92)
Part #10023852
This water access valve, also known as a water inlet valve, is a genuine replacement component designed for use in compatible dishwashers. It regulates the flow of water from the household supply into the dishwasher tub during the wash cycle, based on signals from the electronic control board. Once the appropriate water level is reached, the valve closes to prevent overfilling. A malfunctioning valve may result in poor cleaning performance, water leakage, or failure to start, and is commonly associated with the E15 error code. Sold individually.
Read less
Mounting Bracket – Part Number: 00619985
$14.17
In Stock
Mounting Bracket
★★★★★
★★★★★
(8)
Part #00619985
This genuine OEM dishwasher mounting bracket is designed to securely fasten the appliance to the surrounding cabinet or countertop, helping ensure stable and safe operation. Typically sold as a pair, these durable metal brackets prevent tipping, shaking, and unwanted movement during use, reducing vibration and noise. Ideal for replacing worn, bent, or missing brackets, they help restore proper installation support and improve overall performance. Easy to install with basic tools, this component is an effective solution for maintaining the stability and reliability of your dishwasher.
Read less
SEALING – Part Number: 12054183
$23.53
In Stock
SEALING
★★★★★
★★★★★
(35)
Part #12054183
This dishwasher door gasket creates a watertight seal between the door and the tub, preventing leaks during wash cycles. Made from flexible black rubber, it fits securely along the edge of the door to keep water contained inside the appliance. Over time, the seal may wear out or become damaged, leading to visible leaks or moisture around the door. If you notice water escaping during operation, replacing the gasket can restore proper sealing and protect your kitchen from water damage.
Read less
Dishwasher Circulation Pump with Heater – Part Number: 12008381
$216.29
In Stock
Dishwasher Circulation Pump with Heater
★★★★★
★★★★★
(111)
Part #12008381
If your dishwasher isn’t cleaning well, won’t start, or is leaking, this heat pump assembly could be the fix. It’s designed to fit select Bosch, Thermador, and Gaggenau models and helps circulate and heat water during the wash cycle. This part keeps your dishes clean and your appliance running smoothly. It’s a genuine replacement, so you can count on it to work like the original. Just check your model number before ordering to make sure it’s the right fit.
Read less
PUMP-DRAIN – Part Number: 00631200
$69.01
In Stock
PUMP-DRAIN
★★★★★
★★★★★
(28)
Part #00631200
This drain pump is designed for use in various dishwasher models and is responsible for efficiently removing water at the end of each cycle. It directs the water through the drain hose, which connects to either the kitchen sink plumbing or a dedicated drain line. If you notice water pooling at the bottom of your dishwasher or detect unpleasant odors after a cycle, the pump may be malfunctioning. Additional signs of failure include unusual rattling or grinding noises during operation. Replacing the pump can help restore proper drainage and prevent further issues with your appliance.
Read less
FILTER-MICRO – Part Number: 00645038
$60.96
In Stock
FILTER-MICRO
★★★★★
★★★★★
(22)
Part #00645038
This replacement micro filter is designed to trap small food particles and debris during the wash and rinse cycles, helping to maintain optimal cleaning performance in your dishwasher. Positioned within the tub, it prevents contaminants from clogging the pump or recirculating onto clean dishes. Signs of a worn or faulty filter include poor cleaning results, slow drainage, standing water, or unusual noises during operation. For best results, clean the filter monthly and replace it if damaged. Always check compatibility with your dishwasher model before purchasing.
Read less
Dishwasher Spray Arm – Part Number: 00745856
$44.07
In Stock
Dishwasher Spray Arm
★★★★★
★★★★★
(26)
Part #00745856
This upper spray arm is a key component in many dishwashers, designed to distribute water evenly across dishes placed in the top rack. Located beneath the upper rack, it features multiple nozzles that propel water at high pressure, rotating during the wash cycle to ensure thorough cleaning. Made from a combination of metal and plastic, this part is built for durability and performance. If the spray arm becomes clogged, cracked, or fails to rotate properly, it can lead to poor cleaning results and unusual noises. Replacing it can restore your dishwasher’s efficiency. Sold individually.
Read less
Dishwasher Hosedrain – Part Number: 00744881
$39.01
In Stock
Dishwasher Hosedrain
★★★★★
★★★★★
(17)
Part #00744881
This drain hose helps your dishwasher get rid of dirty water after each cycle. It connects to your home’s plumbing and keeps things flowing smoothly. If your dishwasher isn’t draining, smells bad, or you see water leaking, the hose might be the problem. Replacing it is a simple way to fix those issues—just make sure it fits your model before installing.
HOLDER – Part Number: 00616990
$8.51
In Stock
HOLDER
★★★★★
★★★★★
(2)
Part #00616990
Having trouble with your dishwasher? Let's help you solve that with the Bosch Dishrack Tine Row Holder. This is an original, high-quality part that helps your dishwasher work at full efficiency by securely attaching the tine row to the dishrack. This key part ensures your dishes are held properly, leading to cleaner results. Widely compatible, it fits seamlessly with various Bosch dishwasher models and even some Thermador and Gaggenau models. All you need to do is pop on your work gloves and you're all set for a straightforward installation. Remember, even if a part looks nearly identical, slight differences in size and shape can make a significant impact on performance. So, to avoid any installation hassles or dishwasher mishaps, please confirm this part is the right fit for your particular model before purchasing it. Get your dishwasher back to peak performance today with the Bosch Dishrack Tine Row Holder.
Read less
LOCK – Part Number: 10028963
$45.03
In Stock
LOCK
★★★★★
★★★★★
(17)
Part #10028963
If your dishwasher won’t start or keeps stopping mid-cycle, the door latch might be the issue. This replacement part locks the door securely so the machine can run safely and without leaks. It’s easy to install and helps fix problems like a door that won’t close, pops open, or triggers error messages. Just make sure it fits your model before ordering!
LID – Part Number: 00611322
$33.15
In Stock
LID
★★★★★
★★★★★
(7)
Part #00611322
If your dishwasher isn’t draining properly, this drain pump cover might be the part you need. It helps guide water from the bottom of the dishwasher to the drain pump so everything flows smoothly. Made of sturdy plastic with a white handle, it’s easy to install and helps keep your dishwasher running efficiently. Just make sure it’s the right fit for your model before ordering.
Dishwasher Holder – Part Number: 00616989
$10.09
In Stock
Dishwasher Holder
★★★★★
★★★★★
(1)
Part #00616989
This gray plastic clip helps keep your dishwasher’s lower rack organized by holding the adjustable tines in place. It makes it easier to fit different dish sizes and keeps everything steady during the wash. If your old one is broken or missing, this replacement snaps right in and gets your rack working like new again.
View More

Questions And Answers for SHP78CM2N/22

Ask our experts a question about this model and we'll get back to you as soon as possible!

We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
  • 1
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Cindi - For model number SHP78CM5N/22
May 21, 2026
Dishwasher will not turn on. Have unplugged it then plugged in, checked breaker -turned it off and on. It just happened today. Ran fine 2 days ago.
Chris Boyle Profile
Hi Cindi, thank you for reaching out. Because the unit was working perfectly two days ago and completely shut down today, the issue could be with the door lock mechanism. If the internal microswitch assembly breaks or comes loose, the main control board acts as if the door is perpetually open and refuses to supply power to the display. Replacing it can help fix the issue. The part number is PS12586966. We hope this solves your problem!
$51.39
In Stock
LOCK
Was this helpful?
Thank you for voting!
  • 1

Common Symptoms of the SHP78CM2N/22

How this model fails, and the parts that fix it.

Leaking
Fixed by
these parts
Fixing
Fixing
Show All
Not draining
Fixed by
these parts
Fixing
Fixing
Fixing
Show All
Not cleaning dishes properly
Fixed by
these parts
Fixing
Fixing
Fixing
Show All
Door latch failure
Fixed by
these parts
Fixing
Fixing
Fixing
Show All
Not drying dishes properly
Fixed by
these parts
Fixing
Fixing
Show All
Door won’t close
Fixed by
these parts
Fixing
Fixing
Fixing
Show All
Will Not Start
Fixed by
these parts
Fixing
Fixing
Fixing
Show All
Will not dispense detergent
Fixed by
these parts
Fixing
Show All
Will not fill with water
Fixed by
these parts
Fixing
Show All
Noisy
Fixed by
these parts
Fixing
Fixing
Show All

Videos related to models starting with SHP78CM2N/22

Watch our pros, then fix it yourself.

Replacing the Dishwasher Circulation Pump with Heater

Replacing the Dishwasher Circulation Pump with Heater

Replacing the Dishwasher Circulation Pump with Heater

Replacing the Dishwasher Circulation Pump with Heater

View More
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
E:15 error code with Watertap
48 of 72 people found this instruction helpful.
  • Raymond from VIENNA, VA
  • Easy
  • 30 - 60 mins
  • Pliers
The E:15 error code means water is detected in the pan under the unit. There are several ways this can happen.

In this case, it was caused by a bad inlet valve. It did not close properly and led to an overflow of water inside that eventually spilled into the pan underneath the unit.

I see now why the pump keeps run ning after this error. In this case, it would have led to a big flood in the kitchen if it did not.

I was actually able to run the unit while broke by manually operating the valve under our sink that provides water to the unit.

Be sure to turn off breaker before servicing. Don't get shocked!

Be sure to turn off water before starting! Or, you'll have a flood.

Anyway, I just pulled the unit out (was secured by 2 screws on the sides). I lifted up the insulation material on the left side to get at the valve. Pushed a little green tab to release the electrical plug. Then, use pliers to move clamp off the white water hose on the inside. Then, pull of white hose. This was hard in my case. Took a lot of force. Then, reach behind the unit and use pliers to unscrew water hose. Now, the whole gray panel there can pop out with some force. Then, slip the old valve out and slip new one in. Reconnect hoses and clamp. Note that I put some caulk on the connector where white hose goes. Not sure if needed or not.

Good luck!
Read less
Was this helpful?
Thank you for voting!
The middle rack was rusting and some of the pegs were coming off.
21 of 30 people found this instruction helpful.
  • Susan from MIDDLEBURY, VT
  • Really Easy
  • 15 - 30 mins
Removed the spray arm, front handle, and little clips from the old rack and installed onto the new rack. Was very simple.
Was this helpful?
Thank you for voting!
E15 code basin filling up with water
13 of 14 people found this instruction helpful.
  • KATHLEEN from PECONIC, NY
  • A Bit Difficult
  • More than 2 hours
  • Pliers, Screw drivers, Socket set, Wrench (Adjustable)
Turned off electric
Slid out unit - the water connection on this model is in the back
Disconnected the H2O hose. This valve access part is the part that connects the dishwasher to the H2O supply. The soon to be replaced part had sediment in it preventing H2O to go into the dishwasher and into the basin instead. The exploded view of dishwasher was a big help. It was a guess as to why this was happening. Now that I’ve had it apart it makes sense that this is the part that would fail after a period of time, especially if you have city H2O. My husband Bob did this repair.
Read less
Was this helpful?
Thank you for voting!
View More