This part is a replacement tine row clip for your dishwasher. The tine row clip is adjustable, and it fits onto your dishrack to holds the tines into place. If your dishrack tine rows will not stay in...
Ask our experts a question about this model and we'll get back to you as soon as possible!
2 questions answered by our experts.
< Prev
1
Next >
Sort by:
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
John
August 17, 2023
Diswasher will not run - LED reads E-24. what does that mean?
For model number SHE6AF05UC
Hello John, thank you for reaching out. The E-24 error code means that the dishwasher is not draining properly. We would recommend checking the drain hose is not clogged and is placed properly. Also, check the pump filter, part number PS8730270, is not blocked and is in good condition. If the issue persists, you may need to replace the drain pump, part number PS8727352. We hope this sorts out your problem!
The replacement part diagram for the Bosch dishwasher model SHE6AF05UC/05 shows 2 sensors for the discharge drain pump. Are both required or is this an options to one of the two?
For model number SHE6AF05UC
Hi John, thank you for reaching out. According to our research, your model comes only with one turbidity sensor, part number PS8727345. We hope this information is useful!
We let this go for a shameful amount of time before I decided I could probably fix it. The roller broke so you could only pull it out about halfway or it would come off the track. I looked up the part, and bought it. Actually bought two in case it happened again. When I arrived I looked at how it was put together on the other side and then just basically pushed it onto the rod and it was fixed. I am ashamed it took so long to do it. Never be afraid to try it yourself. It was a total of $10 shipped to fix it.
disconnected inlet hose and water line from sink, removed old inlet valve and installed new valve and reconnected inlet hose and water line from sink - checked for leaks.