This wheel is a dishwasher rack wheel designed for the upper rack of your appliance. The roller wheel is approximately 1.25 inches in diameters and includes the brushing you need for installation. It simply clips right on to the rack frame. After the wheel are attached to the side of the dishrack and are placed into the slides on either s...Read moreide of the appliance. Dishrack roller wheels allow the upper rack in a dishwasher to glide in and out of the appliance with ease. Due to the fact the roller wheel is made of plastic they tend to wear out after a period of time, also they can break. We do recommend you replace these rack wheels in pairs as they often wear out at the same rate. These wheels are sold individually.
This dishwasher water inlet valve is a genuine replacement component engineered to regulate water flow into the appliance, ensuring accurate fill levels for optimal cleaning performance. Constructed to meet strict quality standards, it is compatible with select models from Bosch, Thermador, and Gaggenau. A malfunctioning valve may result ...Read morein the dishwasher failing to fill, underfilling, or leaking. Installation requires disconnecting power and water supply, and wearing protective gloves is recommended for safety. Prior to purchase, model compatibility should be verified to ensure proper fit and function.
This wheel for the lower rack of your dishwasher, it includes the brushing you will need for installation; the axel is not included. You need to line the replacement wheel up with the axel, slide it into place, and then simply clip the wheel onto the frame. There are eight wheels on the lower rack in your dishwasher that help it roll in a...Read morend out of your appliance with ease. This wheel is made of plastic, it is gray in color, and it is sold individually.
This genuine OEM dishwasher mounting bracket is designed to securely fasten the appliance to the surrounding cabinet or countertop, helping ensure stable and safe operation. Typically sold as a pair, these durable metal brackets prevent tipping, shaking, and unwanted movement during use, reducing vibration and noise. Ideal for replacing w...Read moreorn, bent, or missing brackets, they help restore proper installation support and improve overall performance. Easy to install with basic tools, this component is an effective solution for maintaining the stability and reliability of your dishwasher.
This dishwasher door gasket creates a watertight seal between the door and the tub, preventing leaks during wash cycles. Made from flexible black rubber, it fits securely along the edge of the door to keep water contained inside the appliance. Over time, the seal may wear out or become damaged, leading to visible leaks or moisture around ...Read morethe door. If you notice water escaping during operation, replacing the gasket can restore proper sealing and protect your kitchen from water damage.
If your dishwasher isn’t draining or cleaning well, this drain pump could be the issue. It helps move water out of the tub during the cycle and fits many Bosch, Thermador, and Gaggenau models. Signs it’s failing include leftover water, leaks, or strange noises. Replacing it can get your dishwasher working like new again. Sold individually.
If your dishwasher is leaking or not draining properly, this replacement drain hose might be the fix. It connects the dishwasher to your sink drain or garbage disposal, carrying away dirty water after each cycle. Made from tough, translucent material, it’s built to last and helps prevent future leaks. It’s designed to fit select Bosch, Thermador, and Gaggenau models—just check your model number before ordering.
Having trouble with your dishwasher? Let's help you solve that with the Bosch Dishrack Tine Row Holder. This is an original, high-quality part that helps your dishwasher work at full efficiency by securely attaching the tine row to the dishrack. This key part ensures your dishes are held properly, leading to cleaner results. Widely compa...Read moretible, it fits seamlessly with various Bosch dishwasher models and even some Thermador and Gaggenau models. All you need to do is pop on your work gloves and you're all set for a straightforward installation. Remember, even if a part looks nearly identical, slight differences in size and shape can make a significant impact on performance. So, to avoid any installation hassles or dishwasher mishaps, please confirm this part is the right fit for your particular model before purchasing it. Get your dishwasher back to peak performance today with the Bosch Dishrack Tine Row Holder.
Ensure proper detergent release during wash cycles with this genuine latch kit, designed to open the detergent cup at the right time and prevent premature opening. The kit includes a latch, spring, and seal, providing a complete solution for restoring smooth operation. Common signs that replacement is needed include the detergent cup popp...Read moreing open unexpectedly, difficulty closing, or detergent leakage. Installing this part helps maintain optimal cleaning performance and prevents wash cycle interruptions.
Ask our experts a question about this model and we'll get back to you as soon as possible!
We may have answered a similar question already! Search questions and answers left by others using simple keywords like "fit", "broken", "easy", or "quality" to find questions that match.
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Sort by:
Prev
1
Next
Sorry, we couldn't find any existing answers that matched.Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Jack - For model number SHE23R55UC
November 7, 2025
The upper plastic control cover has separated from the machine. Can you advise the part number for replacement. I could not not find it on the part section. I did find one that looks the same and I think it was 191 dollars. Is this the one??
Hello Jack, thank you for contacting us. According to our research, the part you are looking for is the panel fascia, part number PS8735155. We hope this information helps!
Was not filling with water, replace inlet water valve..know it does not wash or spray
Hi Shaun,
Thank you for your question. If the washer is not filling with water, we recommend checking the water inlet valve and the float switch. You will need to test these parts for continuity with a multimeter on the Rx1 setting to see if they are operating normally. Before testing the water inlet valve or the float switch, unplug the dishwasher from the electrical outlet. For the water inlet valve, first visually inspect it for signs of damage, wear, or cracking. If there are no signs of damage, test it with the multimeter. You should receive a reading between 500-1500 ohms. If you get any other reading, you will need a replacement water inlet valve. For the float switch, touch the probes to the switch’s terminals. This should produce a reading of zero or infinity. With the probes still touching the terminals, press in on the switch’s button, this should change the reading to the opposite extreme (from zero to infinity or infinity to zero). If your test results produce readings that differ from those listed above, you will need to replace the float switch. We hope this helps!
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The plastic clip on the roller broke
26 of 38 peoplefound this instruction helpful.
Catherine from AMHERST, NY
Very Easy
Less than 15 mins
We let this go for a shameful amount of time before I decided I could probably fix it. The roller broke so you could only pull it out about halfway or it would come off the track. I looked up the part, and bought it. Actually bought two in case it happened again. When I arrived I looked at how it was put together on the other side and t
... Read morehen just basically pushed it onto the rod and it was fixed. I am ashamed it took so long to do it. Never be afraid to try it yourself. It was a total of $10 shipped to fix it.
Read less
Was this helpful?
Thank you for voting!
My dishwasher was not draining
21 of 34 peoplefound this instruction helpful.
Karen from CRESTON, IA
Easy
15 - 30 mins
Screw drivers
With the help of You Tube, this 50 year old Mom got the job done. Not that complicated if you watch the step by step instructions on the Appliance Pro video. My repairman and husband were both determined to just buy a new one but this 20 year old dishwashing genius was just in need of a little repair. Only need a screwdriver, and sli
... Read moreghtly confusing as wires hook on a little different on new pumps. I suggest watching video the whole way through and then playing it step by step as you do the repair. Worked great for me. Thanks.
Read less
Was this helpful?
Thank you for voting!
Spring assembly on detergent and rinse aid dispenser broke so the sliding lid would not operate
18 of 28 peoplefound this instruction helpful.
Steven from SUWANEE, GA
A Bit Difficult
30 - 60 mins
Screw drivers
Here are the steps you need to take to do the job properly:
1. turn off electrical circuit breaker to the dishwasher 2. remove 8 total hex screws (3 on each side and 2 at the top) of the inside door panel. The door panel will slide off so be careful and it happens pretty quickly when the last hex screw is removed. 3
... Read more. unplug the wiring harness to the detergent/rinse aid dispenser 4. you need to use a flat head screw driver to lift the metal flanges on the top and bottom of the detergent/rinse aid dispenser. 5. the unit will pop out toward the inside of the dishwasher 6. insert the new detergent rinse/aid dispenser and very important all metal flanges are pulled back over the plastic edge (top and bottom) of the dispenser unit. The screw driver needs to be used to assist in pushing the dispenser unit as tight to the frame of the door to ensure the metal flanges grab hold and lock in. 7. re-attach the wiring harness 8. re-install the dishwasher door with 8 hex screws. Doing this step alone is challenging as the door frame will want to keep going up to close. I used a small foot stool and placed it inside the dishwasher front area on top of the inside metal door area so the door would stay open roughly half way. I then used my knees to prop up the outer door cover while i got 2 screws started then was able to easily complete the job. 9. run the dishwasher with a detergent packet loaded into your new dispenser. I checked for 15-20 minutes during initially running to insure no issues or leaks. 10. One last note - my Bosch dishwasher had a custom wood door installed to the outer panel to blend in with our kitchen cabinets. The door itself was much heavier as a result. Some of you may not experience the slight difficulty i noted above in step 8. Good luck.
My Orders
