Models
>
SGI3002
SGI3002 Bosch Dishwasher - Overview
Models starting with SGI3002
Click on the best match to narrow your results.
- SGI3002 ( 01 ) Bosch Dishwasher (Bosch Dishwasher Sgi3002/01)
- SGI3002 ( 13 ) Bosch Dishwasher (Bosch Dishwasher Sgi3002/13)
- SGI3002 ( 07 ) Bosch Dishwasher (Bosch Dishwasher Sgi3002/07)
- SGI3002 ( 14 ) Bosch Dishwasher (Bosch Dishwasher Sgi3002/14)
- SGI3002 ( 12 ) Bosch Dishwasher (Bosch Dishwasher Sgi3002/12)
- SGI3002 ( 31 ) Bosch Dishwasher (Bosch Dishwasher Sgi3002/31)
- SGI3002TC ( 14 ) Bosch Dishwasher (Bosch Dishwasher Sgi3002tc/14)
- SGI3002TC ( 13 ) Bosch Dishwasher (Bosch Dishwasher Sgi3002tc/13)
- SGI3002TC ( 31 ) Bosch Dishwasher (Bosch Dishwasher Sgi3002tc/31)
- SGI3002TC ( 12 ) Bosch Dishwasher (Bosch Dishwasher Sgi3002tc/12)
- SGI3002TC ( 15 ) Bosch Dishwasher (Bosch Dishwasher Sgi3002tc/15)
Keep searches simple, eg. "belt" or "pump".
Rack Roller Wheel
PartSelect #: PS8727423
Manufacturer #: 00611666
This kit comes with one axle and one roller.
$12.75
In Stock
Order within the next 6 hrs and your part ships today!
Door Seal
PartSelect #: PS8723143
Manufacturer #: 00494772
$39.66
In Stock
Order within the next 6 hrs and your part ships today!
Lower Rack Wheel with Clip
PartSelect #: PS8697067
Manufacturer #: 00165314
Sold individually.
$23.65
In Stock
Order within the next 6 hrs and your part ships today!
Lower Door Seal
PartSelect #: PS8714648
Manufacturer #: 00432490
$55.03
In Stock
Order within the next 6 hrs and your part ships today!
Drain Pump
PartSelect #: PS8729769
Manufacturer #: 00642239
The drain pump ejects the water from the dishwasher.
$175.18
In Stock
Order within the next 6 hrs and your part ships today!
LID
PartSelect #: PS8697157
Manufacturer #: 00166623
$23.76
In Stock
Order within the next 6 hrs and your part ships today!
Check Valve
PartSelect #: PS8697043
Manufacturer #: 00165262
$22.10
In Stock
Order within the next 6 hrs and your part ships today!
TRIPPING DEVICE
PartSelect #: PS8697162
Manufacturer #: 00166630
$26.78
In Stock
Order within the next 6 hrs and your part ships today!
Drain Hose
PartSelect #: PS8703123
Manufacturer #: 00298564
$50.90
In Stock
Order within the next 6 hrs and your part ships today!
CUTLERY BASKET
PartSelect #: PS8693487
Manufacturer #: 00093046
$66.93
In Stock
Order within the next 6 hrs and your part ships today!
Micro Filter
PartSelect #: PS8727803
Manufacturer #: 00615079
$87.72
In Stock
Order within the next 6 hrs and your part ships today!
Detergent and Rinse Aid Dispenser
PartSelect #: PS8722285
Manufacturer #: 00490467
The dispenser is mounted on the inner panel of the dishwasher door. The cover of the dispenser has a latch mechanism which is controlled by the electronic board or the timer. The latch releases to ope...
$195.13
In Stock
Order within the next 6 hrs and your part ships today!
Common Symptoms of models starting with SGI3002
[Viewing 9 of 9]Leaking
Fixed by
these parts
these parts
Show All
Not draining
Fixed by
these parts
these parts
Show All
Will not dispense detergent
Fixed by
these parts
these parts
Show All
Door latch failure
Fixed by
these parts
these parts
Show All
Not cleaning dishes properly
Fixed by
these parts
these parts
Show All
Will not fill with water
Fixed by
these parts
these parts
Show All
Noisy
Fixed by
these parts
these parts
Show All
Door won’t close
Fixed by
these parts
these parts
Show All
Not drying dishes properly
Fixed by
these parts
these parts
Show All
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
The plastic clip on the roller broke
We let this go for a shameful amount of time before I decided I could probably fix it. The roller broke so you could only pull it out about halfway or it would come off the track. I looked up the part, and bought it. Actually bought two in case it happened again. When I arrived I looked at how it was put together on the other side and then just basically pushed it onto the rod and it was fixed. I am ashamed it took so long to do it. Never be afraid to try it yourself. It was a total of $10 shipped to fix it.
Parts Used:
-
Catherine from AMHERST, NY
-
Difficulty Level:Very Easy
-
Total Repair Time:Less than 15 mins
20 of 26 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Spring assembly on detergent and rinse aid dispenser broke so the sliding lid would not operate
Here are the steps you need to take to do the job properly:
1. turn off electrical circuit breaker to the dishwasher
2. remove 8 total hex screws (3 on each side and 2 at the top) of the inside door panel. The door panel will slide off so be careful and it happens pretty quickly when the last hex screw is removed.
3. unplug the wiring harness to the detergent/rinse aid dispenser
4. you need to use a flat head screw driver to lift the metal flanges on the top and bottom of the detergent/rinse aid dispenser.
5. the unit will pop out toward the inside of the dishwasher
6. insert the new detergent rinse/aid dispenser and very important all metal flanges are pulled back over the plastic edge (top and bottom) of the dispenser unit. The screw driver needs to be used to assist in pushing the dispenser unit as tight to the frame of the door to ensure the metal flanges grab hold and lock in.
7. re-attach the wiring harness
8. re-install the dishwasher door with 8 hex screws. Doing this step alone is challenging as the door frame will want to keep going up to close. I used a small foot stool and placed it inside the dishwasher front area on top of the inside metal door area so the door would stay open roughly half way. I then used my knees to prop up the outer door cover while i got 2 screws started then was able to easily complete the job.
9. run the dishwasher with a detergent packet loaded into your new dispenser. I checked for 15-20 minutes during initially running to insure no issues or leaks.
10. One last note - my Bosch dishwasher had a custom wood door installed to the outer panel to blend in with our kitchen cabinets. The door itself was much heavier as a result. Some of you may not experience the slight difficulty i noted above in step 8. Good luck.
1. turn off electrical circuit breaker to the dishwasher
2. remove 8 total hex screws (3 on each side and 2 at the top) of the inside door panel. The door panel will slide off so be careful and it happens pretty quickly when the last hex screw is removed.
3. unplug the wiring harness to the detergent/rinse aid dispenser
4. you need to use a flat head screw driver to lift the metal flanges on the top and bottom of the detergent/rinse aid dispenser.
5. the unit will pop out toward the inside of the dishwasher
6. insert the new detergent rinse/aid dispenser and very important all metal flanges are pulled back over the plastic edge (top and bottom) of the dispenser unit. The screw driver needs to be used to assist in pushing the dispenser unit as tight to the frame of the door to ensure the metal flanges grab hold and lock in.
7. re-attach the wiring harness
8. re-install the dishwasher door with 8 hex screws. Doing this step alone is challenging as the door frame will want to keep going up to close. I used a small foot stool and placed it inside the dishwasher front area on top of the inside metal door area so the door would stay open roughly half way. I then used my knees to prop up the outer door cover while i got 2 screws started then was able to easily complete the job.
9. run the dishwasher with a detergent packet loaded into your new dispenser. I checked for 15-20 minutes during initially running to insure no issues or leaks.
10. One last note - my Bosch dishwasher had a custom wood door installed to the outer panel to blend in with our kitchen cabinets. The door itself was much heavier as a result. Some of you may not experience the slight difficulty i noted above in step 8. Good luck.
Parts Used:
-
Steven from SUWANEE, GA
-
Difficulty Level:A Bit Difficult
-
Total Repair Time:30 - 60 mins
-
Tools:Screw drivers
13 of 19 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
My dishwasher was not draining
With the help of You Tube, this 50 year old Mom got the job done. Not that complicated if you watch the step by step instructions on the Appliance Pro video. My repairman and husband were both determined to just buy a new one but this 20 year old dishwashing genius was just in need of a little repair. Only need a screwdriver, and slightly confusing as wires hook on a little different on new pumps. I suggest watching video the whole way through and then playing it step by step as you do the repair. Worked great for me. Thanks.
Parts Used:
-
Karen from CRESTON, IA
-
Difficulty Level:Easy
-
Total Repair Time:15 - 30 mins
-
Tools:Screw drivers
10 of 15 people
found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!