RY80940A Ryobi Pressure Washer - Overview

This is a genuine OEM replacement kit. This kit is threaded into the pump assembly. It is connected to the Chemical Siphon Tube that is placed in a container that contains the cleaner you are using. The O-Rings are placed on the Bronze nozzle, then the spring will go in first, then the steel ball, then thread in the nozzle.

This is an authentic OEM part for pressure washers made by Homelite, Ryobi, and Husky. The inlet tube fits onto the pump and is made out of metal. When replacing this part a socket set may be needed. It is available as an individual replacement part, but also includes the metal bolt and the rubber o-ring.

This is an authentic OEM nozzle designed to fit the Homelite and Ryobi pressure washers listed below. It is a twist-adjustable nozzle featuring five (5) separate nozzle degree widths. One (1) nozzle is included. The nozzles are listed below in order from gentlest to most forceful: • Soap Fan - a gentle nozzle used to apply soap to a clo...Read morese and/or very delicate area • Soap Jet - a slightly less gentle nozzle made to apply soap to a farther/smaller area • Forty (40) Degree - a gentler nozzle best used for light duty washing on surfaces prone to breakage, scratching, and/or paint loss • Twenty-five (25) Degree - suited for standard pressure washing duties on more sturdy/solid surfaces • Zero (0) Degree - the most powerful possible nozzle degree width designed for heavy duty grime and stains from harder surfaces

This is an authentic manufacturer made replacement part which is specially designed for use with Ryobi pressure washers. The detergent tank cap seals the detergent tank to ensure the soap stays contained as well as keep debris from getting in the tank. The cap is made of plastic and is sold individually. No tools are required for installation, simply screw on the cap firmly to the detergent tank to secure.

This is an authentic Homelite replacement part. The screw is designed by the manufacturer for use in pressure washers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws used in the machine. Refer to the parts diagram to be sure of order...Read moreing the correct part. You will require a screwdriver when replacing this part. This item is sold individually.