RY802925 (095079510) Ryobi Pressure Washer - Overview

This is a genuine replacement part that has been OEM sourced to be used with pressure washers from Homelite, Ryobi, and Ridgid. The special filter connects to the end of the chemical siphon tube and is used to prevent dirt from entering the pump. This item is available as an individual replacement part.

This is a genuine OEM replacement kit. This kit is threaded into the pump assembly. It is connected to the Chemical Siphon Tube that is placed in a container that contains the cleaner you are using. The O-Rings are placed on the Bronze nozzle, then the spring will go in first, then the steel ball, then thread in the nozzle.

This is an original replacement part designed for the Homelite and Ryobi pressure washers listed below. This is a low pressure nozzle which draws soap/chemical mixture from the detergent tank, and gently spray a light coat onto a surface for cleaning. This soap nozzle may also be called a chemical injector tip. One (1) nozzle is included.

Genuine OEM replacement part, this item is sold individually. This is the part on the pressure washer that you connect the hose to. The hose then connects to the handle assembly and spray wand.

It is a genuine replacement part that is supplied by original equipment manufacturer for use with Homelite, Ridgid and Ryobi pressure washers. This siphon tube is used to deliver the chemical solution from the tank to the pump. Over time the tube may develop cracks allowing for leaks, if this happens this part can easily be replaced. It is made of durable flexible rubber material and it is sold individually.

This is an OEM part sourced directly from the manufacturer. The label is commonly found on pressure washers and generators from Homelite, Ridgid, and Ryobi. This part is made of paper with an adhesive backing, and is generally placed on the fuel tank to indicate what kinds of fuel are safe to use with the machine. No tools are required...Read more when replacing this item. Simply remove the old part, peel off the protective backing, and carefully stick the new part into place. This item is sold individually.

This part is an OEM from Ryobi. The pump unloader valve is a pressure washer component. The metal item is designed to relieve the engine from trapped air, and is sold individually. A screwdriver, needle nose pliers and a wrench set are often needed for the installation.